Solaris 10 Speed and Duplex Settings: bge Post: 302349315

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Hi All I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that. How do I: 1. Check the duplex settings on my eri0 card? 2. Set the...

2. IP Networking

NIC speed 100M/full duplex problem

I have a TOSHIBA AS7000 B150 Sun Box I wanted to run it with 100M/full duplex I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot. set eri:eri_adv_100fdx_cap=1 set eri:eri_adv_100hdx_cap=0 set eri:eri_adv_autoneg_cap=0 But when I...

3. HP-UX

command to change duplex settings..

Hi Folks, I want the command to change the duplex settings of a HP-UX server. Thanks in advance. Sagar.

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Hi there We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is. As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only...

5. UNIX for Advanced & Expert Users

How to set full duplex for solaris 5.5

I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5. #ndd -set /dev/le adv_100fdx_cap 1

6. Infrastructure Monitoring

How to find the duplex speed on Windows

Hi, In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this? Please advice.

7. Solaris

How to find half duplex or full duplex

Hi, How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct? Also let me know how to change from half to full duplex.

8. AIX

How to change Speed Duplex

How to change Speed Duplex ! How to change Speed Duplex by command chdev -P -l ent1 -a media_speed=1000_Full_Duplex How to change Speed Duplex by Smitty . smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ...

9. AIX

Connected and Running with half duplex speed

VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good. Other ethernet adapter in the VIO server are connected and running in Full duplex speed. Please help me find why this shared...

10. Shell Programming and Scripting

Need script help for monitoring duplex settings

So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex. I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters STARTMODE=onboot BOOTPROTO=static...

LEARN ABOUT MOJAVE

vgcfgbackup

VGCFGBACKUP(8)                                                System Manager's Manual                                               VGCFGBACKUP(8)

NAME

       vgcfgbackup - backup volume group descriptor area

SYNOPSIS

       vgcfgbackup [-d|--debug] [-f|--file filename] [-h|--help] [--ignorelockingfailure] [-P|--partial] [-v|--verbose] [VolumeGroupName...]

DESCRIPTION

       vgcfgbackup  allows you to backup the metadata of your volume groups.  If you don't name any volume groups on the command line, all of them
       will be backed up.

       In a default installation, each volume group gets backed up into a separate file bearing the name of the  volume  group  in  the  directory
       /etc/lvm/backup.   You can write the backup to an alternative file using -f.  In this case if you are backing up more than one volume group
       the filename is treated as a template, and %s gets replaced by the volume group name.

       NB. This DOESN'T backup user/system data in logical volume(s)!  Backup /etc/lvm regularly too.

OPTIONS

       See lvm for common options.

SEE ALSO

       lvm(8), vgcfgrestore(8)

Sistina Software UK                                      LVM TOOLS 2.02.95(2) (2012-03-06)                                          VGCFGBACKUP(8)

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Discussion started by: saabir

2. IP Networking

NIC speed 100M/full duplex problem

Discussion started by: AirWalker83

3. HP-UX

command to change duplex settings..

Discussion started by: sag71155

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Discussion started by: hcclnoodles