I running HPUX 11.0,
Netscape gives me an error "Unable to locate Server" when using a www.something.com address.
If I use an IP address I get past the router and onto the Internet.
My workstation can get to the Router @ 192.168.0.1 and also it's local APACHE server.
I have DHCP enabled... (8 Replies)
i have just installed solaris 10 on a 60 gb hard drive. now im trying to install my nic driver but when i put in the floppy disk for the nic card it cant read it, so then i found that i have to mount the floppy drive and i tried putting in the mount command but i dont know where to mount it and if... (38 Replies)
Hi I installed solaris developer edition 1/08 today.I want to connect to Broadband internet through my ADSL 2+ Modem/Router with a username and password.
plz help in this case,I am new to sun solaris:confused:
the modem itself is a router it worked well on ubuntu and red hat (3 Replies)
HI,
Am using GPRS ( MOB # 3230 ) internet connection in windows
Hw to use internet r connect in linux.. ( Red Hat Linux Ver.10 )
Please help me..
Thanks in adv.. (1 Reply)
Hi,
Iam using BSNL broad band connection and i have installed two OS Xp & Sun solaris -x86 on my machine.Iam able to use INTERNET on windows Xp but not able to do it on solaris x86.
I have tried using DHCP concept as well as sys-unconfig command in solaris but no results.
When i use... (5 Replies)
Dear freinds...
I downloaded solaris for x86 and was able to configure the lan correctly.. I can ping and share with other destops through lan... but still I can't connect to internet ? can you please help..
I put my default gateway which is 192.168.1.1 to /etc/defaultrouter but with no use..... (13 Replies)
I have installed Oracle VM virtual box on Windows 7 and using LINUX (backtrack 5) as my virtual OS. The problem is i'm unable to connect to internet from my virtual OS. i'm using USB dongle (mobile broad band) to connect to internet from my host OS windows 7.
I tried setting NAT in VM settings... (0 Replies)
Hi,
I have a wired internet connection of hathway provider. I would like to use the connection on my desktop as well as my laptop. My desktop pc has windows 7 and yesterday I installed slackware 14.1 (full installation) on my lenovo 3000 n100 laptop.
Previously I had slacko puppy 5.7... (7 Replies)
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Hello, I installed FreeBSD 10.3 on AQEMU. I can't connect to internet in none
of the modes of "Default, User-Mode Networking" and "TUN/TAP Networking".
I am able to ping my host in the TAP networking mode (192.168.1.33 which is my
IP addr in guest), but getting 'no route to host' for any... (1 Reply)
Discussion started by: temp-usr
1 Replies
LEARN ABOUT DEBIAN
shorewall-exclusion
SHOREWALL-EXCLUSION(5) [FIXME: manual] SHOREWALL-EXCLUSION(5)NAME
exclusion - Exclude a set of hosts from a definition in a shorewall configuration file.
SYNOPSIS
!address-or-range[,address-or-range]...
!zone-name[,zone-name]...
DESCRIPTION
The first form of exclusion is used when you wish to exclude one or more addresses from a definition. An exclaimation point is followed by
a comma-separated list of addresses. The addresses may be single host addresses (e.g., 192.168.1.4) or they may be network addresses in
CIDR format (e.g., 192.168.1.0/24). If your kernel and iptables include iprange support, you may also specify ranges of ip addresses of the
form lowaddress-highaddress
No embedded whitespace is allowed.
Exclusion can appear after a list of addresses and/or address ranges. In that case, the final list of address is formed by taking the first
list and then removing the addresses defined in the exclusion.
Beginning in Shorewall 4.4.13, the second form of exclusion is allowed after all and any in the SOURCE and DEST columns of
/etc/shorewall/rules. It allows you to omit arbitrary zones from the list generated by those key words.
Warning
If you omit a sub-zone and there is an explicit or explicit CONTINUE policy, a connection to/from that zone can still be matched by the
rule generated for a parent zone.
For example:
/etc/shorewall/zones:
#ZONE TYPE
z1 ip
z2:z1 ip
...
/etc/shorewall/policy:
#SOURCE DEST POLICY
z1 net CONTINUE
z2 net REJECT
/etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DEST
# PORT(S)
ACCEPT all!z2 net tcp 22
In this case, SSH connections from z2 to net will be accepted by the generated z1 to net ACCEPT rule.
In most contexts, ipset names can be used as an address-or-range. Beginning with Shorewall 4.4.14, ipset lists enclosed in +[...] may also
be included (see shorewall-ipsets[1] (5)). The semantics of these lists when used in an exclusion are as follows:
o !+[set1,set2,...setN] produces a packet match if the packet does not match at least one of the sets. In other words, it is like NOT
match set1 OR NOT match set2 ... OR NOT match setN.
o +[!set1,!set2,...!setN] produces a packet match if the packet does not match any of the sets. In other words, it is like NOT match set1
AND NOT match set2 ... AND NOT match setN.
EXAMPLES
Example 1 - All IPv4 addresses except 192.168.3.4
!192.168.3.4
Example 2 - All IPv4 addresses except the network 192.168.1.0/24 and the host 10.2.3.4
!192.168.1.0/24,10.1.3.4
Example 3 - All IPv4 addresses except the range 192.168.1.3-192.168.1.12 and the network 10.0.0.0/8
!192.168.1.3-192.168.1.12,10.0.0.0/8
Example 4 - The network 192.168.1.0/24 except hosts 192.168.1.3 and 192.168.1.9
192.168.1.0/24!192.168.1.3,192.168.1.9
Example 5 - All parent zones except loc
any!loc
FILES
/etc/shorewall/hosts
/etc/shorewall/masq
/etc/shorewall/rules
/etc/shorewall/tcrules
SEE ALSO shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
shorewall-tunnels(5), shorewall-zones(5)NOTES
1. shorewall-ipsets
http://www.shorewall.net/manpages/shorewall-ipsets.html
[FIXME: source] 06/28/2012 SHOREWALL-EXCLUSION(5)