What if the number of lines of the original file is unknown ?
In my example I gave 3 lines but it can be anything between 1 and 20 lines.
In this case you will have to have some indication for a "record" being complete. Maybe you will need some record starting criteria too, for which one could match. Provide some data and i will provide some solution.
Quote:
Originally Posted by Browser_ice
I tried the combinations below which do not change anything or are not recognized
This is just a way to enter non-printing (control-) characters into vi: enter input mode, press "CTRL-V", then press CTRL-M (for example for "^M"). You should be still in input mode and see "^M" under the cursor.
Quote:
sed 's/.$//' does remove the ^M at the end of each line but then it is still a multi-line format.
It removes the last character in a line, regardless which character this is - this is the problem. You have to specifically match "^M" (CTRL-M) and throw that out. You can throw out linefeeds by searching for "\n". Try the following with some test file:
to see the effect: two lines combined to one and the linefeed is replaced by an at.
[quote]Is there a way to find out in VI what is the ascii value of the character under the cursor ?[/qoute]
Hi,
I have a situation where I want to replace some occurrences of ".jsp" into ".html" inside a text file.
For Example:
If a pattern found like <a href="http://www.mysite.com/mypage.jsp"> it should be retained.
But if a pattern found like <a href="../mypage.jsp"> it should be changed to... (4 Replies)
Hi I'm trying to replace text in a file based upon a pattern.
The pattern I'm looking for is:
<styleURL>#style0002</styleURL>
<name>#######6105#######</name>The # are seven alphanumeric characters before and after 6105.
I need it to replace that with this recursively:
... (4 Replies)
Hi
I need to create multiple text files from onc text file on AIX. The data of text files is as below:
**********************************************
**********************************************
DBVERIFY: Release 10.2.0.4.0 - Production on Tue Nov 10 13:45:42 2009
Copyright (c) 1982,... (11 Replies)
i am editing a big log file with the following pattern:
Date: xxxx Updated: name
Some log file text here
Date: eee Updated: ny
Some log file text here
Basically i want to remove all the text in a line before the "Updated" pattern. I sill want to print the other... (4 Replies)
Can someone help me with a sed command:
There will be multiple occurences in a file that look like this:
MyFunction(12c34r5)
and I need to replace that with just the 12c34r5 for every occurrence. The text between the parentheses will be different on each occurrence, so I can't search for that.... (4 Replies)
HI Folks,
I'm looking for a solution for this issue.
I want to find the Pattern 0/ and replace it with /. I'm just removing the leading zero. I can find the Pattern but it always puts literal value as a replacement.
What am I missing??
sed -e s/0\//\//g File1 > File2
edit by... (3 Replies)
I have a sample text format as given below
<Text Text_ID="10155645315851111_10155645333076543" From="460350337461111" Created="2011-03-16T17:05:37+0000" use_count="123">This is the first text</Text>
<Text Text_ID="10155645315851111_10155645317023456" From="1626711840902323"... (3 Replies)
i have a file which contains data seperated by comma. i want to replace text after 3rd occurrence of a comma.
the input file looks like this
abcdef,11/02/2015 11:55:47,1001,1234567812345678,12364,,abc
abcdefg,11/02/2015 11:55:47,01,1234567812345678,123,,abc
abcdefhih,11/02/2015... (4 Replies)
hi unix expert
is there any command in linux to repace a pattern in the text to another pattern?
many thanks
samad (2 Replies)
Discussion started by: abdossamad2003
2 Replies
LEARN ABOUT MOJAVE
perlos400
PERLOS400(1) Perl Programmers Reference Guide PERLOS400(1)NAME
perlos400 - Perl version 5 on OS/400
DESCRIPTION
This document describes various features of IBM's OS/400 operating system that will affect how Perl version 5 (hereafter just Perl) is
compiled and/or runs.
By far the easiest way to build Perl for OS/400 is to use the PASE (Portable Application Solutions Environment), for more information see
<http://www.iseries.ibm.com/developer/factory/pase/index.html> This environment allows one to use AIX APIs while programming, and it
provides a runtime that allows AIX binaries to execute directly on the PowerPC iSeries.
Compiling Perl for OS/400 PASE
The recommended way to build Perl for the OS/400 PASE is to build the Perl 5 source code (release 5.8.1 or later) under AIX.
The trick is to give a special parameter to the Configure shell script when running it on AIX:
sh Configure -DPASE ...
The default installation directory of Perl under PASE is /QOpenSys/perl. This can be modified if needed with Configure parameter
-Dprefix=/some/dir.
Starting from OS/400 V5R2 the IBM Visual Age compiler is supported on OS/400 PASE, so it is possible to build Perl natively on OS/400. The
easier way, however, is to compile in AIX, as just described.
If you don't want to install the compiled Perl in AIX into /QOpenSys (for packaging it before copying it to PASE), you can use a Configure
parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the "make install" to install everything into that directory, while the
installed files still think they are (will be) in /QOpenSys/perl.
If building natively on PASE, please do the build under the /QOpenSys directory, since Perl is happier when built on a case sensitive
filesystem.
Installing Perl in OS/400 PASE
If you are compiling on AIX, simply do a "make install" on the AIX box. Once the install finishes, tar up the /QOpenSys/perl directory.
Transfer the tarball to the OS/400 using FTP with the following commands:
> binary
> site namefmt 1
> put perl.tar /QOpenSys
Once you have it on, simply bring up a PASE shell and extract the tarball.
If you are compiling in PASE, then "make install" is the only thing you will need to do.
The default path for perl binary is /QOpenSys/perl/bin/perl. You'll want to symlink /QOpenSys/usr/bin/perl to this file so you don't have
to modify your path.
Using Perl in OS/400 PASE
Perl in PASE may be used in the same manner as you would use Perl on AIX.
Scripts starting with #!/usr/bin/perl should work if you have /QOpenSys/usr/bin/perl symlinked to your perl binary. This will not work if
you've done a setuid/setgid or have environment variable PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the latest PTFs to
have this feature. Scripts starting with #!/QOpenSys/perl/bin/perl should always work.
Known Problems
When compiling in PASE, there is no "oslevel" command. Therefore, you may want to create a script called "oslevel" that echoes the level
of AIX that your version of PASE runtime supports. If you're unsure, consult your documentation or use "4.3.3.0".
If you have test cases that fail, check for the existence of spool files. The test case may be trying to use a syscall that is not
implemented in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL environment variable or have a handler for the SIGILL. If
you can compile programs for PASE, run the config script and edit config.sh when it gives you the option. If you want to remove fchdir(),
which isn't implement in V5R1, simply change the line that says:
d_fchdir='define'
to
d_fchdir='undef'
and then compile Perl. The places where fchdir() is used have alternatives for systems that do not have fchdir() available.
Perl on ILE
There exists a port of Perl to the ILE environment. This port, however, is based quite an old release of Perl, Perl 5.00502 (August 1998).
(As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1 has been out since April 2001.) If you need to run Perl on ILE,
though, you may need this older port: <http://www.cpan.org/ports/#os400> Note that any Perl release later than 5.00502 has not been ported
to ILE.
If you need to use Perl in the ILE environment, you may want to consider using Qp2RunPase() to call the PASE version of Perl.
AUTHORS
Jarkko Hietaniemi <jhi@iki.fi> Bryan Logan <bryanlog@us.ibm.com> David Larson <larson1@us.ibm.com>
perl v5.18.2 2013-11-04 PERLOS400(1)