05-12-2009
thanks for your quick answer.
Okay, that would help me have the LPAR alive.. thru the AIX O/S
how about the SAN disks ?
From my DS8000 i have created logical disks and assigned to VIO_SERVER_1
Create Virtual SCSI Adapter on VIO_SERVER_1 and LPAR_1 + LPAR_2 + LPAR_3 + LPAR_4
Allocation
VIO_SERVER_1 disk10 (From SAN) given to LPAR_1
VIO_SERVER_1 disk11 (From SAN) given to LPAR_2
VIO_SERVER_1 disk12 (From SAN) given to LPAR_3
VIO_SERVER_1 disk13 (From SAN) given to LPAR_4
Now if the Vio_server_1 goes down all those disks will disappear from LPAR_1 + LPAR_2 + LPAR_3 + LPAR_4
1) How can I make failover or redundancy for it with VIO_Server_2 (other than Mirroring)
2) Can I use Mobility under HMC to move the LPAR Partition under the same Managed system to another VIO Server (in my case VIO_SERVER_2 ? )
thanks
9 More Discussions You Might Find Interesting
1. AIX
Can anyone point me to any best practices for partitioning, resource prerequisites, and implementation of Oracle 10G release 2 with RAC on 2 power6 550's running AIX5.3 as a cluster? (1 Reply)
Discussion started by: JodyTek
1 Replies
2. AIX
Hello,
Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter.
It is similar to virtual scsi adapter.
In my client partition I created the virtual Fibre Adapter mapped it with the VIO... (1 Reply)
Discussion started by: filosophizer
1 Replies
3. AIX
Hi,
I want to know wheather partition size for installation of vio client can be specified on vio server
example
If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
Discussion started by: manoj.solaris
1 Replies
4. AIX
Hello,
We just purchased two new 4-way (one active one failover) 5Ghz Power6 Servers (failover) with 64GB RAM (32GB per node) runing AIX 6.1 with two LPARs per node connected to our SAN with two 4GB HBAs. The PROD LPAR has 2 dedicated CPUs (4 virtual) and the TEST LPAR has 2 dedicated CPUs.
... (3 Replies)
Discussion started by: troym72
3 Replies
5. AIX
Would anyone please kindly help to solve this problem...
An LPAR with the below network configuration. ent0 and ent1 are logical lan (virtual ethernet) from VIO SEA.
en0
1.2.3.4 <- boot ip
192.168.1.1 <- persistent ip
192.168.1.10 <- service ip
en1
11.22.33.44 <- boot ip
When I... (6 Replies)
Discussion started by: skeyeung
6 Replies
6. AIX
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Discussion started by: newtoaixos
1 Replies
7. AIX
I know I will get blasted for posting here, not know where to post this, however, I have performance question between the 2 platforms.
Not knowing the exact processors in each box, but the Power6 Platform clock speed is 4400 (?? at least what was told to me), and the Power7 clock speed is 3500.... (5 Replies)
Discussion started by: mrmurdock
5 Replies
8. AIX
how to get power6 power FRU?
the power5 can get by this command:
lscfg -vp | grep -p 'AC PS' | grep FRU
however, the power6 machine cannot get any info for that command.
thanks (1 Reply)
Discussion started by: rainbow_bean
1 Replies
9. AIX
Hi, I have recently inherited an old p520 from work running AIX 6.1, based on the POWER6 CPU. I'm planning to play around with it and use it to learn the system, so this is a purely personal project. The machine is not under a support contract any more.
I am looking to replace one of the disks... (11 Replies)
Discussion started by: topcat
11 Replies
SCSI(4) Kernel Interfaces Manual SCSI(4)
Name
SCSI - Small Computer System Interconnect
Description
The ULTRIX system interfaces to disk and tape devices through the Small Computer System Interconnect (SCSI). Initial ULTRIX SCSI support
is limited to the Digital-supplied mass storage devices. The following devices are fully supported on the ULTRIX system:
o Winchester disks: RZ22, RZ23, RZ23L, RZ24, RZ55, RZ56, RZ57, RX23, RX26, RX33
o Magnetic tapes: TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
o Optical disks: RRD40, RRD42
Under the ULTRIX operating system, a SCSI device is referred to by its logical name. Logical names take the following form:
nn#
The nn argument is the two-character name; the number sign (#) represents the unit number. The two character names for SCSI devices are:
rz - RZ22, RZ23, RZ23L, RZ24, RZ55, RZ56, RZ57, RX23, RX26, RX33, RRD40, RRD42 disks
tz - TZ30, TZK50, TLZ04, TSZ05, TKZ08, and TZK10 tapes
The unit number is a combination of the SCSI bus number, either 0, 1, ... and the device's target ID number. The unit number is eight
times the bus number plus the target ID. For example, an RZ23 disk at target ID 3 on bus 0 would be referred to as rz3; a TZK50 tape at
target ID 5 on the second SCSI bus would be referred to as 13.
The SCSI bus has eight possible target device IDs. By default, one is allocated to the system. This allows for a maximum of seven target
devices connected to a SCSI bus.
Restrictions
The ULTRIX SCSI device driver does not operate with optical disks, other than the Digital-supplied devices.
The SCSI driver attempts to support on a best effort basis, non-Digital-supplied winchester disks and magnetic tapes.
The following notes apply to the driver's handling of non-Digital-supplied disks:
o These disks are assigned a device type of RZxx, instead of RZ22, RZ23, RZ23L, RZ55, RZ56, RZ57, RX23, RX26, or RX33. The RZxx disks
follow the same logical device naming scheme as the Digital-supplied disks.
o During the autoconfigure phase of the system startup, the driver prints the contents of the SCSI vendor ID, product ID, and the
revision level fields of the inquiry data return by the SCSI device.
o RZxx disks are assigned a default partition table. The default table can be modified by editing the sz_rzxx_sizes[8] entry in the
file The utility can also be used to modify the partition table on a RZxx disk.
o The only logical unit number (LUN) supported for each target ID is 0.
See Also
rz(4), tz(4), chpt(8)
SCSI(4)