send-uucp(8) [redhat man page]
SEND-UUCP(8) System Manager's Manual SEND-UUCP(8) NAME
send-uucp, send-nntp, send-ihave - send Usenet articles to remote site SYNOPSIS
{ send-nntp | send-uucp | send-ihave } [ -d ] sitename:hostname | sitename [ sitename:hostname | sitename .. ] DESCRIPTION
The send-* utilities are scripts that process the batch files written by innd(8) to send Usenet articles to a remote NNTP or UUCP site. The sites to be fed may be specified by giving sitename hostname pairs on the command line. The sitename is the label the site has in the newsfeeds file, the hostname is the real hostname of the remote site, a FQDN (Fully Qualified Domain Name) in the case of an NNTP host, or the UUCP name in the case of a UUCP host. Normally, the sitename and the hostname are the same, and as such don't have to be specified as sitename:hostname pairs but just as a sitename. send-uucp compresses batches of news and sends the to the remote site with uux. send-nntp Starts an innxmit to send the articles to the remote site. send-ihave encapsulates the articles in an ihave control message and uses inews to send the articles to a to.sitename pseudo-group. Using send-ihave is discouraged, nobody uses it anymore and even the author of this manpage is unsure as to how it actually works or used to work. send-* expect that the batchfile for a site is named <pathoutgoing in inn.conf>/sitename. To prevent batchfile corruption, shlock(1) is used to ``lock'' these files. OPTIONS
-d The ``-d'' flag causes nntpsend to send output to stdout rather than the log file <pathlog in inn.conf>/<program-name>.log. NOTES
You should probably not use send-nntp, but innfeed, or if that is not possible, nntpsend. The usual flags in the newsfeed file to write a batch file suitable for processing by send-uucp are Tf,Wfb . The usual flags for a batch file for send-nntp are Tf,Wfm SEE ALSO
newsfeeds(5), nntpsend(8) SEND-UUCP(8)
Check Out this Related Man Page
NNTPSEND(8) System Manager's Manual NNTPSEND(8) NAME
nntpsend - send Usenet articles to remote site SYNOPSIS
nntpsend [ -a ] [ -c ] [ -D ] [ -d ] [ -n ] [ -P portnum ] [ -p ] [ -r ] [ -S ] [ -s size ] [ -T timelimit ] [ -t timeout ] [ sitename fqdn ] ... DESCRIPTION
Nntpsend is a front-end that invokes innxmit(1) to send Usenet articles to a remote NNTP site. The sites to be fed may be specified by giving sitename fqdn pairs on the command line. If no such pairs are given, nntpsend defaults to the information given in the nntpsend.ctl(5) config file. The sitename should be the name of the site as specified in the newsfeeds(5) file. The fqdn should be the hostname or IP address of the remote site. An innxmit is launched for sites with queued news. All innxmit processes are spawned in the background and the script waits for them all to finish before returning. Output is sent to the file <pathlog in inn.conf>/nntpsend.log. In order to keep from overwhelming the local system, nntpsend waits five seconds before spawned each child. Nntpsend expects that the batchfile for a site is named <pathoutgoing in inn.conf>/sitename. To prevent batchfile corruption, shlock(1) is used to ``lock'' these files. When sitename fqdn pairs are given on the command line, any flags given on the command completely describe how innxmit and shrinkfile oper- ate. When no such pairs are given on the command line, then the information found in nntpsend.ctl becomes the default flags for that site. Any flags given on the command line override the default flags for the site. OPTIONS
-d -D The ``-d'' flag causes nntpsend to send output to stdout rather than the log file <pathlog in inn.conf>/nntpsend.log. The ``-D'' flag does the same and it passes ``-d'' to all innxmit invocations which in turn causes innxmit to go into debug mode. -n If the ``-n'' flag is used, then nntpsend does not use shlock(1) and does not lock batch files. -s If the ``-s'' flag is used, then shrinkfile(1) will be invoked to perform a head truncation on the batchfile and the flag will be passed to it. -a -c -P -p -r -S -T -t The ``-a'', ``-c'', ``-P'', ``-p'', ``-r'', ``-S'', ``-T'' and ``-t'' flags are passed on to the child innxmit program. See innxmit(8) for more details. Note that if the ``-p'' flag is used then no connection is made and no articles are fed to the remote site. It is useful to have cron(8) invoke nntpsend with this flag in case a site cannot be reached for an extended period of time. EXAMPLES
With the following control file: nsavax:erehwon.nsavax.gov::-S -t60 group70:group70.org:: walldrug:walldrug.com:4m-1m:-T1800 -t300 kremvax:kremvax.cis:2m: The command: nntpsend will result in the following: Sitename Truncation Innxmit flags nsavax (none) -a -S -t60 group70 (none) -a -t180 walldrug 1m if >4m -a -T1800 -t300 kremvax 2m -a -t180 The command: nntpsend -d -T1200 will result in the following: Sitename Truncation Innxmit flags nsavax (none) -a -d -S -T1200 -t60 group70 (none) -a -d -T1200 -t180 walldrug 1m if >4m -a -d -T1200 -t300 kremvax 2m -a -d -T1200 -t180 The command: nntpsend -s 5m -T1200 nsavax erehwon.nsavax.gov group70 group70.org will result in the following: Sitename Truncation Innxmit flags nsavax 5m -a -T1200 -t180 group70 5m -a -T1200 -t180 Remember that ``-a'' is always given, and ``-t'' defaults to 180. HISTORY
Written by Landon Curt Noll <chongo@toad.com> and Rich $alz <rsalz@uunet.uu.net> for InterNetNews. This is revision 1.8.6.1, dated 2000/08/17. SEE ALSO
inn.conf(5), innxmit(1), newsfeeds(5), nntpsend.ctl(5), shrinkfile(1). NNTPSEND(8)