SEC(8) Network UPS Tools (NUT) SEC(8)NAME
sec - Driver for SEC protocol UPS equipment
NOTE
This man page only documents the hardware-specific features of the sec driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
Various - this driver should recognize any UPS that speaks the SEC protocol at 1200-19200 bps.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
AUTHOR
John Marley <John.Marley@alcatel.com.au>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/
NUT mailing list archives and information: http://lists.exploits.org/
Wed Oct 16 2002 SEC(8)
Check Out this Related Man Page
LIEBERT(8) NUT Manual LIEBERT(8)NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)
Hi everyone,
I am a new comer in this forum.
When I try to send email in my Linux machine with command "mail" or "sendmail", I always find it include the IP address of my machine in the email header. Does anybody know how to eliminate this IP address or replace it with a fake one in the email... (20 Replies)
Hi All,
i have an input below.
As long as "x= 1" , i would want to capture 2 lines using sed or awk
for eg :
0001 x= 1 $---------------------------------..-.--..
0001 tt= 137 171 423 1682 2826 0
Pls help. Thanks in advance.
Note that the number of lines in each block do... (37 Replies)
Im trying to get the frist two line of a file as a variables.
input file
/tmp/tmp.txt
1226037463l
1226037422ll
while read -r LINE
do
if ;
then
FRIST=`echo $LINE | awk -F"|" 'NR==1''{print $1}'`
echo $FRIST
SECOND=`echo $LINE | awk -F"|"... (37 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
I'm having an issue with SSH on a server that hasn't had any configuration changes made on it in a long time. I SSH to the server and it hangs at "debug1: SSH2_MSG_KEXINIT sent" for exactly 40 seconds then connects fine after that pause. Everything I have found points to DNS, but I use host files... (19 Replies)
Hi!
I have a debian linux VPS and i am wondering how would someone be able to hack into it , in what ways ?
I've asked a more knowledgeable friend and he said the only way someone would be able to get into my VPS is via FTP or SSH, are there some other ways someone can enter my machine ?
I... (18 Replies)
I have lines like:
table10 table_name_10 table10 table_name_10
table20 table_name_20 table20 table_name_20
table30 table_name_30 table30 table_name_30
I want to change the second "table_names" in all lines to test_table_name. Required output would be:
table10 table_name_10 table10... (19 Replies)
Hi,
I'd like to intersect two files by the 4th col of the first file and 6th col of the second file. This is the code I use:
awk 'NR==FNR{A;next}$6 File1 File2
However, this is only outputting the second file lines. I'd like to have both lines in a single line separated by a tab.
Thanks in... (25 Replies)
I have Ubuntu 16.04 (dual boot with Windows 10) and a HP Spectre x360 laptop.
I have recently bought a Dell Ultrasharp U2515H monitor, which I connect via a Dell docking station.
When I plug the docking station to my laptop on Windows, both monitors are detected and everything works fine.
... (23 Replies)
I am new to grep and Linux and am looking to see if grep can parse out a list of lines that have a difference of more than 10 seconds between the times on each line.
Example
2016-09-17 19:30:57 INFO: id: 4562079216, time: 2016-09-17 19:30:41,
2016-09-17 12:02:26 INFO: id:... (26 Replies)
]I would like to make the second file label 'b' print down the first file label 'a', like shifting down the file creating new lines I want it to print all the way down until the first line of the second file hit the last line of the first file. Would I have to put this into a file itself or could I... (24 Replies)
You are seeing this new video here first!
Top Five Cybersecurity Threats | Earth Year 2019 | You Have Been Warned!
https://youtu.be/dRE4u9QVsSg
PS: That video has two small typos, but nothing serious. Heck it took nearly 1.5 hours to render even on a 12-core Mac Pro with 64GB of... (20 Replies)