lsmod(8) [redhat man page]

LSMOD(8)						       Linux Module Support							  LSMOD(8)

NAME

       lsmod - list loaded modules.

SYNOPSIS

       lsmod [-hV]

DESCRIPTION

       lsmod shows information about all loaded modules.

       The  format  is name, size, use count, list of referring modules.  The information displayed is identical to that available from /proc/mod-
       ules.

       If the module controls its own unloading via a can_unload routine then the user count displayed by lsmod is always -1, irrespective of  the
       real use count.

OPTIONS

       -h, --help
	      Display a summary of options and immediately exit.

       -V, --version
	      Display the version of lsmod and immediately exit.

SEE ALSO

       insmod(8), modprobe(8), depmod(8), rmmod(8), ksyms(8)

HISTORY

       Module support was first conceived by Anonymous
       Initial Linux version by Bas Laarhoven <bas@vimec.nl>
       Version 0.99.14 by Jon Tombs <jon@gtex02.us.es>
       Extended by Bjorn Ekwall <bj0rn@blox.se>
       Updated for 2.1.17 by Richard Henderson <rth@tamu.edu>
       Updated by Bjorn Ekwall <bj0rn@blox.se> in March 1999

Linux								 February 4, 2002							  LSMOD(8)

rmmod(8)						      System Manager's Manual							  rmmod(8)

NAME

       rmmod -- simple program to remove a module from the Linux Kernel

SYNOPSIS

       rmmod [-f]  [-w]  [-s]  [-v]  [modulename]

DESCRIPTION

       rmmod  is  a  trivial  program to remove a module (when module unloading support is provided) from the kernel.  Most users will want to use
       modprobe(8) with the -r option instead.

OPTIONS

       -v --verbose
		 Print messages about what the program is doing.  Usually rmmod prints messages only if something goes wrong.

       -f --force
		 This option can be extremely dangerous: it has no effect unless CONFIG_MODULE_FORCE_UNLOAD was set when the kernel was  compiled.
		 With  this  option,  you can remove modules which are being used, or which are not designed to be removed, or have been marked as
		 unsafe (see lsmod(8)).

       -w --wait Normally, rmmod will refuse to unload modules which are in use.  With this option, rmmod will isolate the module, and wait  until
		 the  module  is  no  longer  used.  Nothing new will be able to use the module, but it's up to you to make sure the current users
		 eventually finish with it.  See lsmod(8)) for information on usage counts.

       -s --syslog
		 Send errors to syslog instead of standard error.

       -V --version
		 Show version of program and exit.

COPYRIGHT

       This manual page originally Copyright 2002, Rusty Russell, IBM Corporation. Maintained by Jon Masters and others.

SEE ALSO

       modprobe(8), insmod(8), lsmod(8)       modinfo(8)

																	  rmmod(8)