bestferrups801-807(8) [redhat man page]

BESTFERRUPS801-807(8)					      Network UPS Tools (NUT)					     BESTFERRUPS801-807(8)

NAME

       bestferrups801-807

NOTE

       This  man  page only documents the hardware-specific features of the bestferrups801-807 driver.	For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE

       bestferrups801-807 supports Best FerrUPS models with 8.01 - 8.07 firmware.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

WRITABLE VARIABLES

       The time and date can be set through this driver.  Time must be hh:mm:ss format and the date must be mm/dd/yy.

BUGS

       The password to access the UPS is currently hard-coded and should be available as a command-line/ups.conf option.

AUTHOR

       Jonathan Corbin <jonboy@rocketmonkey.org>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/

       NUT mailing list archives and information: http://lists.exploits.org/

								  Tue Oct 15 2002					     BESTFERRUPS801-807(8)

powernet(8)						      Network UPS Tools (NUT)						       powernet(8)

NAME

       powernet - Driver for APC SNMP UPS equiment

NOTE

       This  man  page	only  documents the hardware-specific features of the powernet driver.	For information about the core driver, see nutups-
       drv(8).

SUPPORTED HARDWARE

       APC AP9606 APC Web/SNMP management card, perhaps others

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5):

       community=value
	      SNMP community to use (default = public)

       sdtype=value
	      Shutdown type to use - possible values:

	      0 = Soft shutdown or powerdown, depending on line status (default)

	      1 = Soft shutdown followed by powerdown

	      2 = Instant shutdown

	      3 = Shutdown with grace period

REQUIREMENTS

       You will need to install the Net-SNMP package from http://www.net-snmp.org/ before building this driver.

INSTALLATION

       This driver is not built by default.  You can build it by using "configure --with-drivers=powernet" before calling make.

IMPLEMENTATION

       The hostname of the UPS is specified with the "port" value in ups.conf, i.e.:

	    [ap9606]
		 driver = powernet
		 port = apc-snmp-ups.example.com
		 community = writable

AUTHORS

       Dmitry Frolov (powernet)

       Hans Ekkehard Plesser (snmp-ups)

       Arnaud Quette (snmp-ups)

SEE ALSO

   APC's PowerNet MIB v3.3.0
       Available online at http://apcc.com/tools/download/

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/

       NUT mailing list archives and information: http://lists.exploits.org/

								  Tue Oct 22 2002						       powernet(8)