AMCHECKDB(8) System Manager's Manual AMCHECKDB(8)NAME
amcheckdb - check Amanda database for tape consistency
SYNOPSIS
amcheckdb config
DESCRIPTION
Amcheckdb verifies that every tape mentioned in the Amanda database is still valid in the tapelist file.
See the amanda(8) man page for more details about Amanda.
EXAMPLE
This shows a normal response:
# amcheckdb DailySet1
Ready.
This shows tape DMP014 is still listed in the database but is no longer listed in the tapelist file:
# amcheckdb DailySet1
Tape DMP014 missing in /etc/amanda/DailySet1/tapelist
Ready.
AUTHOR
Adrian T. Filipi-Martin <atf3r@cs.virginia.edu>
SEE ALSO amadmin(8), amrmtape(8), amanda(8)AMCHECKDB(8)
Check Out this Related Man Page
AMLABEL(8) System Manager's Manual AMLABEL(8)NAME
amlabel - label an Amanda tape
SYNOPSIS
amlabel [-f] config label [ slot slot ]
DESCRIPTION
All Amanda tapes must be pre-labeled before they are used. Amanda verifies the label in amdump and amflush before writing to make sure the
proper tape is loaded.
Amlabel writes an Amanda label on the tape in the device specified by the amanda.conf file in /etc/amanda/config. Label may be any string
that does not contain whitespace and that matches the amanda.conf labelstr regular expression option. It is up to the system administrator
to define a naming convention.
Amlabel appends the new tape to the tapelist file so it will be used by Amanda before it reuses any other tapes. When you amlabel multiple
tapes, they will be used in the order you amlabel them.
Amlabel will not write the label if the tape contains an active Amanda tape or if the label specified is on an active tape. The -f (force)
flag bypasses these verifications.
An optional slot may be specified after the tape label. If a tape changer is in use, amlabel will label the tape in the specified slot
instead of the currently loaded tape.
See the amanda(8) man page for more details about Amanda.
EXAMPLE
Write an Amanda label with the string "DMP000" on the tape loaded in the device named in the tapedev option in /etc/amanda/Daily-
Set1/amanda.conf:
% amlabel DailySet1 DMP000
Label the tape in slot 3 of the currently configured tape changer with the string "DMP003":
% amlabel DailySet1 DMP003 slot 3
MESSAGES
label label doesn't match labelstr "str"
Label label on the command line does not match the labelstr regular expression str from amanda.conf.
label label already on a tape
Label label is already listed as an active Amanda tape.
no tpchanger specified in "path", so slot command invalid
The command line has the slot parameter but the amanda.conf file in path does not have a tape changer configured.
reading label label, tape is in another amanda configuration
This tape appears to be a valid Amanda tape, but label does not match labelstr for this configuration so it is probably part of a
different Amanda configuration.
reading label label, tape is active
Tape label appears to already be part of this Amanda configuration and active, i.e. has valid data on it.
no label found, are you sure tape is non-rewinding?
While checking that the label was written correctly, amlabel got an error that might be caused by mis-configuring Amanda with a
rewinding tape device name instead of a non-rewinding device name for tape.
AUTHOR
James da Silva <jds@cs.umd.edu>
University of Maryland, College Park
SEE ALSO amanda(8)amdump(8)amflush(8)AMLABEL(8)
I need to use bash to convert sentences where all words start with a small letter into one where all words start with a capital letter.
So that a string like:
are utilities ready for hurricane sandy
becomes:
Are Utilities Ready For Hurricane Sandy (10 Replies)
Hi
I am new to this forum.
Any please help me to capture ctrl x and ctrl y via a bash script.
and please tell me how to clear the prompt via bash script
BR
Ramukumar M (4 Replies)
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
i know from the command line, the symbol $_ is used to get the last command that was run.
however, id like to replicate this within a script.
meaning, how do i do something like this:
#!/bin/sh
ps -ef | egrep talling
StoreThisLastCommandA=$_
awk '/error/ {print $3}' /tmp/test... (5 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
Hi Folks,
I feel that I should be posting this in the Unix for Dummies Forum and will probably wish I'd created an account and done just that - but here goes anyway.
I have two identical servers both Dell R430's both running RedHat Enterprise Server 7.4 and the same kernel, both have the same... (16 Replies)
Hi,
What is installation package and how to create it?
When we run:
in AIX:
installp package1
or
in Linux
rpm -ivh mypackage
What is package1 or mypackage in the abov examples and how to create them and deploy them?
I hope my question is clear enough.
Thank you (2 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)