DMC(4x)DMC(4x)NAME
dmc - DMC input driver
SYNOPSIS
Section "InputDevice"
Identifier "idevname"
Driver "dmc"
Option "Device" "devpath"
...
EndSection
DESCRIPTION
dmc is an XFree86 input driver for DMC FIT10-controller...
The dmc driver functions as a pointer input device, and may be used as the X server's core pointer. THIS MAN PAGE NEEDS TO BE FILLED IN.
SUPPORTED HARDWARE
What is supported...
CONFIGURATION DETAILS
Please refer to XF86Config(5x) for general configuration details and for options that can be used with all input drivers. This section
only covers configuration details specific to this driver.
Config details...
SEE ALSO XFree86(1), XF86Config(5x), xf86config(1), Xserver(1), X(7x).
AUTHORS
Authors include...
XFree86 Version Version 4.3.0 DMC(4x)
Check Out this Related Man Page
DMC(4) Kernel Interfaces Manual DMC(4)NAME
dmc - DMC input driver
SYNOPSIS
Section "InputDevice"
Identifier "idevname"
Driver "dmc"
Option "Device" "devpath"
...
EndSection
DESCRIPTION
dmc is an XFree86 input driver for DMC FIT10-controller...
The dmc driver functions as a pointer input device, and may be used as the X server's core pointer. THIS MAN PAGE NEEDS TO BE FILLED IN.
SUPPORTED HARDWARE
What is supported...
CONFIGURATION DETAILS
Please refer to XF86Config(5) for general configuration details and for options that can be used with all input drivers. This section only
covers configuration details specific to this driver.
Config details...
SEE ALSO XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7).
AUTHORS
Authors include...
XFree86 Version 4.7.0 DMC(4)
I have installed Solaris on my Dell machine, but I can't get the display driver to work. I have an NVIDIA RIVA TNT2, but when I select that adapter in kdmconfig, I get the message:
Could'nt probe screen #0
InitOutput: AddScreen failed for SUNWnvidia
I can use the generic 16 color display... (3 Replies)
On my linux box, i run netstat -l and i see xdmcp in the list but it doesn't have LISTEN as its state, see what it shows below, I'm wondering if this might explain why i can't see it in my exceed broadcast listing of servers broadcasting on our net? My unix boxes don't show this at all.
Proto ... (1 Reply)
Ok, when our lan switched to DHCP, and my linux boxes dropped off the network, it is because the DNS wasn't set correctly. Got the DNS set now, and they are showing up in my Exceed XDMCP broadcast box however, i now have another problem. They access the internet. I don't want them to. HOw can I... (3 Replies)
I recently downloaded and installed Solaris 10 on an Intel PC. I want to connect to it via XDMCP from another client.
I found you can enable xdmcp as follows:
Launch -> Applications -> Utilities -> Administration -> Login Screen Setup
Then selected the XDMCP tab and click the box that... (1 Reply)
Hi, Boss
i have a problem about open the Graphic remote. when i used the Xmanager2.0 connect to the Sun Fire880 with Sun solaris 2.8 software. prompt to following information:
XDMCP connection failed: retry?
so can some body told me how the check the XDMCP protocol was enable...and the port 177... (9 Replies)
Hello everyone,
I installed AIX the other day (several times!) but I can't get XDMCP to work.
I remember from when I installed it the last time it worked out of the box.
So why doesn't it work now?
This is the error message I get:
XDMCP fatal error: Session failed Session 2 failed for... (3 Replies)
Hi ppl, anyone has encounter this error before? I can't remote login to another machine residing in the same subnet via CDE and the error I get in var/dt/Xerrors is
XDMCP fatal error: Session declined No valid address
Warning:
Name: submenu_options_button
Class: XmRowColumn
... (2 Replies)
Hi Friends,
I am not able to login through X browser from Windows Machine to Sun Fire V890 server. Solaris 10 is installed on this machine.
Please suggest me what changes need to be done in Solaris Server.
Thanks in Advance (2 Replies)
Hi all,
I was building x11vnc on Solaris 10 SPARC and needed libjpeg, so I built and installed that in the right path /usr/sfw/lib. Now I can't get the dtgreet screen on my local network using XDMCP. I strongly suspect the library installation broke something (conflict with libjpeg in /lib or... (2 Replies)
An X86-based laptop has just had Solaris 10 os. The graphics config has not been automatically detected and it is running without graphics. Which two programs can i run to creat an Xorg configuration file. (3 Replies)
Hi,
i got the following error when i tried to access the cygwin x server from a windows XP PC.
"xdmcp fatal error session failed session 23 failed for display"
Alternatively, when i tried to access the same Cygwin X Server from another windows XP PC which is on a different LAN... (3 Replies)
I'm trying to create a persistent KDE session and access that login remotely.
While logged into the remote machine I have enabled XDMCP and started a VNC server that requests a login screen.
vnc4server -query localhost -geometry 800x480 -depth 8
When I try to view that vnc screen the... (5 Replies)