installing scsi card

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Installing SCSI

I need to hook a tape library to my compy (tru64 versifon 4F) by way of SCSI. I can get as far as plugging it in on my own. Please help Thanks

2. Solaris

I have 2 solaris boxes and trying to connect to D1000 to do clustering. I put the U cable to see the disks from both side, but I can't see any of the disks when I use format command. How can I verify that differential card is installed and configured correctly? Thanks in advance.

3. UNIX for Dummies Questions & Answers

Problems with SCSI card and tape drive

Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system...

4. SCO

Installing SCSI Tape drive

Hello, I'm having some issues with installing SCSI tape drive on SCO 5.0.6 hardware config shows the following adapters %adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto %adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd %adapter - 3 - ...

5. SCO

configure Adaptec 29320ALP Ultra 320 SCSI Card in IBM X3400

I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120...

6. Solaris

Trouble Installing a SCSI Adapter

Okay. I admit I'm sort of a newbie in this regard. I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing. ...

7. UNIX for Advanced & Expert Users

SCSI Card in Solaris 8

HI, I am trying to install Symbios SCSI PCI adapter in Ultra10 but unable to configure it. Getting following errors genunix: NOTICE: glm0: fault detected in device; service still unavailable genunix: NOTICE: glm0: Symbios PCI device (1000,3) not supported. Anyone has an idea, how to resolve...

8. UNIX for Advanced & Expert Users

Ultra 3 scsi card

Ok guys I need all the help I can get right now. I have a Ultra 60 sun server and I can't get a ultra 3 scsi card to work in it . When I install the card the system will not boot correctly and I come up with errors that say: pcipsy0: This is block Can someone please help me. I trying to hook...

9. UNIX for Dummies Questions & Answers

Installing a SCSI controller... problems

Hi, I have installed a SCSI Controller onto an HPUX 10.20b and I don't have any driver files for it when I check in Sys Admin. Do I need to update the kernel? I am not sure how to get the computer to recognize this controller... any suggestions? Thanks

10. Filesystems, Disks and Memory

help installing Sun 8mm unipack scsi tape drive

Hi all, please help I am stuck. I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the...

LEARN ABOUT NETBSD

uk

UK(4)							   BSD Kernel Interfaces Manual 						     UK(4)

NAME

     uk -- SCSI user-level driver

SYNOPSIS

     uk* at scsibus? target ? lun ?

DESCRIPTION

     The uk driver provides support for a process to address devices on the SCSI bus for which there is no configured driver.

     A SCSI adapter must also be separately configured into the system before this driver makes sense.

KERNEL CONFIGURATION

     If a count is given, that number of uk devices will be configured into the NetBSD kernel.

IOCTLS

     The uk driver has no ioctls of its own but rather acts as a medium for the generic scsi(4) ioctls.  These are described in <sys/scsiio.h>.

FILES

     /dev/uk[0-255]  unknown SCSI devices.

DIAGNOSTICS

     All scsi(4) debug ioctls work on uk devices.

SEE ALSO

     ioctl(2), cd(4), ch(4), scsi(4), sd(4), ss(4), st(4)

HISTORY

     The uk driver appeared in 386BSD 0.1.

BSD
								 October 11, 1993							       BSD

UNIX for Dummies Questions & Answers