disksuite and raidctl used together

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

help in a script using raidctl

getStatusi86() { #storing logical volume name volumelist=`cfgadm -val | grep "Logical Volume" | awk '{print substr($1,9,14)}'` controller=`echo $volumelist | awk '{print substr($1,2,1)}'` #errordisk="" volume1=`echo $volumelist | awk '{print $1}'` for volume in $volumelist do...

2. Solaris

Raidctl - Sun T5240 Solaris 10 Problem

I tried using raidctl earlier today to use my 2 disks in a RAID1 setup and I totally destroyed my OS install. I'm sure I did something funky and it freaked out. No big deal...right? This is what I was seeing after a reboot. I decided to just reinstall the OS. It let me go through all of...

3. Solaris

How to Find Drive serial Number under raidctl?

I have boot disk mirrored using hardware raid i.e raidctl command. If I want to place an order for a spare drive and keep it at our location for spare, how do I find the disk specification since #format does not reveal this. The server is T2000 running Solaris 10. Any help please.

4. Solaris

raidctl performance issues

using the internal 2 drives mirror was created using raidctl on 100's of our servers . sometime when one drive fails we dont face any issue & we replace the drive with out any problem . but sometimes when one drive fails , system becomes unresponsive and doesnot allow us to login , the only way to...

5. UNIX for Dummies Questions & Answers

Information About raidctl

Hello people i have a question, when i put raidctl -l on sun fire show this Volume Size Stripe Status Cache RAID Sub Size Level Disk ...

6. UNIX for Advanced & Expert Users

Solaris 10 Raidctl

Hello World: Recently I ran into an issue where a collegue had installed a Sun T5140 with twin 136GB disks in them. However, he forgot to execute the raidctl command first to mirror c1t0d0 to c1t1d0 boo hoo:) So along I come and try to mirror the disks by booting to sigle user...

7. Solaris

raidctl on SUN T5240

Setting up a T5240 with two disks c1t0d0 and c1t1d0. I am trying to use raidctl but when I issue. raidctl -l I get Controller 1 Disk: 0.0.0 Disk: 0.1.0 So I try raidctl -c '0.0.0 0.1.0' -r 1 1 and I get "Array in use." I try

8. Solaris

raidctl

At my own eys I can see 4 disks inside of server. Previous admin told me that hardware mirror is done. What I see with "format" is 2 disks - I suspect that these are 2 MIRRORS. I just cant be sure because raidctl show this: # raidctl -l c0t0d0 Volume Size Stripe ...

9. UNIX for Dummies Questions & Answers

create raidctl mirror with mounted source parition

I am mirroring a single partition drive with raidctl. The source partition was mounted when I created the mirror with raidctl -c c1t1d0 c1t3d0. The source disk was defined with s2 and s6 only. I didn't think to umount it first. Is there a problem with that?

10. UNIX for Dummies Questions & Answers

raidctl and resync when reboot

I am using raidctl on a v440 disk and noticed it resyncs after every boot, which takes about 30 minutes because of the size of the partition. I am concerned with what happens during the resync if "writes" happen to the disk before it is complete? Any info would be helpful. Thanks

LEARN ABOUT ULTRIX

tms

tms(4)							     Kernel Interfaces Manual							    tms(4)

Name
       tms - TMSCP magnetic tape interface

Syntax
       For UNIBUS, Q-bus:
	  controller klesiu0 at uba0
	  controller uq0 at klesiu0 csr 0174500 vector uqintr
	  tape tms0 at uq0 drive 0

       For MSI Bus:
	  adapter msi0 at nexus?
	  controller dssc0 at msi0 msinode 0
	  tape tms0 at dssc0 drive 3

       For VAXBI:
	  controller klesib0 at vaxbi0 node 0
	  controller uq0 at klesib0 vector uqintr
	  tape tms0 at uq0 drive 0

	  controller aie0 at vaxbi? node?
	  controller bvpssp0 at aie0 vector bvpsspintr
	  tape tms0 at bvpssp0 drive 0

       For MSI Bus:
	  adapter msi0 at nexus?
	  controller dssc0 at msi0 msinode 0
	  tape tms0 at dssc0 drive 0

       For VAX CI/HSC:
	  adapter ci0 at nexus?
	  adapter ci0 at vaxbi? node?
	  controller hsc0 at ci0 cinode 6
	  tape tms0 at hsc0 drive 3

Description
       Prior to Version 2.0, this device was referenced by tmscp(4).

       The  TMSCP  driver  provides  a standard tape drive interface, as described in This is a driver for any controller that adheres to the Tape
       Mass Storage Control Protocol (TMSCP).  The TMSCP controllers communicate with the host through a packet-oriented protocol termed the  Tape
       Mass  Storage  Control Protocol.  This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape
       drives).  See for further details.

Tape Support
       TK50, TK70, TF70, TU81, TU81e, TA78, TA79, TA81, RV20, TA90, TA90E, TA91

Diagnostics
       All diagnostic messages are sent to the error logger subsystem.

Files
See Also
       mtio(4), nbuf(4), MAKEDEV(8), uerf(8), tapex(8)
       Guide to the Error Logger

																	    tms(4)

UNIX for Dummies Questions & Answers