Hie Neo and LivinFree,
As i asked before for the Question of accessing Multiharddisk, ive been told to post the output of df and dmesg. Here im attaching you the df & dmesg outputs from my system. Hope my problem can come to a conclusion.
df output:
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda5 12405000 1042040 10732812 9% /
/dev/hda2 23333 2480 19649 12% /boot
/dev/fd0 1423 0 1423 0% /mnt/floppy
/dev/hdd 626268 626268 0 100% /mnt/cdrom
dmesg output:
Linux version 2.2.16-22 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release))
#1 Tue Aug 22 16:49:06 EDT 2000
Detected 350794 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 699.60 BogoMIPS
Memory: 63884k/66496k available (1048k kernel code, 412k reserved, 1088k data, 64k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Deschutes) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb480
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda
MA, hdb
MA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc
io, hdd
MA
hda: ST320413A, ATA DISK drive
hdb: Maxtor 52049H4, ATA DISK drive
hdd: ATAPI CDROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST320413A, 19470MB w/1024kB Cache, CHS=2482/255/63
hdb: Maxtor 52049H4, 19470MB w/2048kB Cache, CHS=4945/128/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 779.526 MB/sec
p5_mmx : 818.388 MB/sec
8regs : 601.980 MB/sec
32regs : 337.566 MB/sec
using fastest function: p5_mmx (818.388 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 >
hdb: [PTBL] [2482/255/63] hdb1
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 72252k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc4826000, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
es1371: version v0.22 time 16:53:18 Aug 22 2000
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xe000 irq 10
es1371: features: joystick 0x0
es1371: codec vendor STM (0x53544d) revision 4 (0x04)
es1371: codec features Headphone out 20bit DAC 18bit ADC
es1371: stereo enhancement: no 3D stereo enhancement
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 28M
agpgart: Detected SiS 620 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
parport0: PC-style at 0x378 [SPP,PS2]
parport_probe: failed
parpot0: no IEEE-1284 device present.
lp0: using parport0 (polling).
hdd: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.10
hdd: ATAPI 40X CD-ROM drive, 128kB Cache
-
Hope there is a conclusion on this problems.
Thanks