Need help explaining how to use a VPN on a UNIX server with a Mac OS

Thread Tools Search this Thread
Top Forums UNIX for Dummies Questions & Answers Need help explaining how to use a VPN on a UNIX server with a Mac OS
# 1  
Need help explaining how to use a VPN on a UNIX server with a Mac OS

I have gotten a gig to teach someone how to use a VPN client for a UNIX server on a MAC os. The problem is I have never used UNIX, dont mess with VPN's (my dad has a VPN that I have used a couple of times). I'm currently taking a crash course on UNIX but I was wondering if anyone could help me with the finer points. Maybe any help on using a vpn on unix?

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #833
Difficulty: Medium
YAML version 1.2 is a superset of JSON.
True or False?

10 More Discussions You Might Find Interesting

1. IP Networking

VPN Server & Client

First of all, hello. I have a problem installing a vpn server and client. My server is a computer running windows 7, and windows, running a virtual machine running debian. In the debian system, I've the vpn server installed (SoftEther VPN Server) The problems come when I try to connect to... (1 Reply)
Discussion started by: Blues23
1 Replies

2. IP Networking

Can Solaris VPN to a Server without breaking it's other networking rules !?

Hi All, Actually a very basic question this one. I've got a Solaris 10 x86 server box on a network. There are a group of other servers I need to connect to from it, but via a VPN connection. If I install a vpn client on my solaris box, can I configure the VPN connection so it only routes certain... (1 Reply)
Discussion started by: mikecouk
1 Replies

3. UNIX for Dummies Questions & Answers

VPN on an online server

Hi there, Believe it or not, the word VPN doesn't give any search result in the forum. I'm trying to get started with VPN. I'm currently in the process of setting up a server. I found a lot of howtos on the web. There's still one thing that I'm not sure of. My plan is to setup the VPN... (4 Replies)
Discussion started by: chebarbudo
4 Replies

4. IP Networking

Cisco VPN server and client - connection drop

I have a Cisco 1841 router configured as Easy VPN Server. Here is the configuration of the router: Cisco# Cisco#show running-config Building configuration... Current configura - I have a Centos 5.7 server with installed Cisco VPN client for Linux. The client successfully... (0 Replies)
Discussion started by: rcbandit
0 Replies

5. AIX

Help Me - AIX server connect to a VPN network

Hi, I have a task requested by my boss to create a script to enable a server to connect to a vpn network and then to connect to another server to upload some data... How can I connect to a vpn network from AIX server? via telnet? ssh? I have tried to google but mostly the answers are... (1 Reply)
Discussion started by: mushr00m
1 Replies

6. Solaris

Cisco IOS VPN server IKE

How do I tell if Cisco IOS VPN server IKE is running on my solaris 10 system (1 Reply)
Discussion started by: pgsanders
1 Replies

7. IP Networking

Is Possible to Registrar a MAC Address in a VPN

Hi Gurus, I have a question: I have a connection VPN to my Branch Office, but some day the Network administrator send an e-mail and he tell me that I must be disconnected the VPN. But In that moment I don't use the VPN, Someone was coneccted to the VPN I think. The Question is: I want to know... (0 Replies)
Discussion started by: andresguillen
0 Replies

8. OS X (Apple)

MAC OSX and UNIX server based software

I am a MAC user evaluating electronic medical record software. I found a package which is UNIX server based. Can anyone tell me if MAC OS X can be used in this situation. The software is nexgen ( How UNIX "compatible" is MAC OS X? I apologize for my very limited UNIX... (7 Replies)
Discussion started by: kaye32608
7 Replies

9. Solaris

Solaris 10 - vpn server

I would like to setup my solaris 10 x86 system as a vpn server. I can't seem to find any good links on setting it up. Do you guys have some links that could walk me thru on setting up the vpn server so that windows clients can connect to it? (4 Replies)
Discussion started by: kungpow
4 Replies

10. UNIX for Advanced & Expert Users

VPN client (windows Box),and Server (Unix Box)

If I want to access unix box via VPN tunnel,from windows box. What sould I configure on the windows client PC, and what should I enable on the Unix Server box ? I am using Solaris V10 intel platform, and I am using windows XP, and 2003 for client (0 Replies)
Discussion started by: zillah
0 Replies
GVPE(5) 						   GNU Virtual Private Ethernet 						   GVPE(5)

GNU-VPE - Overview of the GNU Virtual Private Ethernet suite. DESCRIPTION
GVPE is a suite designed to provide a virtual private network for multiple nodes over an untrusted network. This document first gives an introduction to VPNs in general and then describes the specific implementation of GVPE. WHAT IS A VPN? VPN is an acronym, it stands for: Virtual Virtual means that no physical network is created (of course), but a network is emulated by creating multiple tunnels between the member nodes by encapsulating and sending data over another transport network. Usually the emulated network is a normal IP or Ethernet, and the transport network is the Internet. However, using a VPN system like GVPE to connect nodes over other untrusted networks such as Wireless LAN is not uncommon. Private Private means that non-participating nodes cannot decode ("sniff)" nor inject ("spoof") packets. This means that nodes can be connected over untrusted networks such as the public Internet without fear of being eavesdropped while at the same time being able to trust data sent by other nodes. In the case of GVPE, even participating nodes cannot sniff packets send to other nodes or spoof packets as if sent from other nodes, so communications between any two nodes is private to those two nodes. Network Network means that more than two parties can participate in the network, so for instance it's possible to connect multiple branches of a company into a single network. Many so-called "VPN" solutions only create point-to-point tunnels, which in turn can be used to build larger networks. GVPE provides a true multi-point network in which any number of nodes (at least a few dozen in practise, the theoretical limit is 4095 nodes) can participate. GVPE DESIGN GOALS SIMPLE DESIGN Cipher, HMAC algorithms and other key parameters must be selected at compile time - this makes it possible to only link in algorithms you actually need. It also makes the crypto part of the source very transparent and easy to inspect, and last not least this makes it possible to hardcode the layout of all packets into the binary. GVPE goes a step further and internally reserves blocks of the same length for all packets, which virtually removes all possibilities of buffer overflows, as there is only a single type of buffer and it's always of fixed length. EASY TO SETUP A few lines of config (the config file is shared unmodified between all hosts) and a single run of gvpectrl to generate the keys suffices to make it work. MAC-BASED SECURITY Since every host has it's own private key, other hosts cannot spoof traffic from this host. That makes it possible to filter packet by MAC address, e.g. to ensure that packets from a specific IP address come, in fact, from a specific host that is associated with that IP and not from another host. PROGRAMS
Gvpe comes with two programs: one daemon (gvpe) and one control program (gvpectrl). gvpectrl This program is used to generate the keys, check and give an overview of of the configuration and to control the daemon (restarting etc.). gvpe This is the daemon used to establish and maintain connections to the other network nodes. It should be run on the gateway of each VPN subnet. COMPILETIME CONFIGURATION
Please have a look at the gvpe.osdep(5) manpage for platform-specific information. Gvpe hardcodes most encryption parameters. While this reduces flexibility, it makes the program much simpler and helps making buffer overflows impossible under most circumstances. Here are a few recipes for compiling your gvpe, showing the extremes (fast, small, insecure OR slow, large, more secure), between which you should choose: AS LOW PACKET OVERHEAD AS POSSIBLE ./configure --enable-hmac-length=4 --enable-rand-length=0 Minimize the header overhead of VPN packets (the above will result in only 4 bytes of overhead over the raw ethernet frame). This is a insecure configuration because a HMAC length of 4 makes collision attacks based on the birthday paradox pretty easy. MINIMIZE CPU TIME REQUIRED ./configure --enable-cipher=bf --enable-digest=md4 Use the fastest cipher and digest algorithms currently available in gvpe. MD4 has been broken and is quite insecure, though, so using another digest algorithm is recommended. MAXIMIZE SECURITY ./configure --enable-hmac-length=16 --enable-rand-length=8 --enable-digest=sha1 This uses a 16 byte HMAC checksum to authenticate packets (I guess 8-12 would also be pretty secure ;) and will additionally prefix each packet with 8 bytes of random data. In the long run, people should move to SHA-256 and beyond). In general, remember that AES-128 seems to be as secure but faster than AES-192 or AES-256, more randomness helps against sniffing and a longer HMAC helps against spoofing. MD4 is a fast digest, SHA1, RIPEMD160, SHA256 are consecutively better, and Blowfish is a fast cipher (and also quite secure). HOW TO SET UP A SIMPLE VPN
In this section I will describe how to get a simple VPN consisting of three hosts up and running. STEP 1: configuration First you have to create a daemon configuration file and put it into the configuration directory. This is usually /etc/gvpe, depending on how you configured gvpe, and can be overwritten using the -c command line switch. Put the following lines into /etc/gvpe/gvpe.conf: udp-port = 50000 # the external port to listen on (configure your firewall) mtu = 1400 # minimum MTU of all outgoing interfaces on all hosts ifname = vpn0 # the local network device name node = first # just a nickname hostname = # the DNS name or IP address of the host node = second hostname = node = third hostname = The only other file necessary is the if-up script that initializes the virtual ethernet interface on the local host. Put the following lines into /etc/gvpe/if-up and make it executable (chmod 755 /etc/gvpe/if-up): #!/bin/sh ip link set $IFNAME address $MAC mtu $MTU up [ $NODENAME = first ] && ip addr add dev $IFNAME [ $NODENAME = second ] && ip addr add dev $IFNAME [ $NODENAME = third ] && ip addr add dev $IFNAME ip route add dev $IFNAME This script will give each node a different IP address in the 10.0/16 network. The internal network (if gvpe runs on a router) should then be set to a subset of that network, e.g. on node first, on node second, and so on. By enabling routing on the gateway host that runs gvpe all nodes will be able to reach the other nodes. You can, of course, also use proxy ARP or other means of pseudo-bridging, or (best) full routing - the choice is yours. STEP 2: create the RSA key pairs for all hosts Run the following command to generate all key pairs for all nodes (that might take a while): gvpectrl -c /etc/gvpe -g This command will put the public keys into /etc/gvpe/pubkeys/nodename and the private keys into /etc/gvpe/hostkeys/nodename. STEP 3: distribute the config files to all nodes Now distribute the config files and private keys to the other nodes. This should be done in two steps, since only the private keys meant for a node should be distributed (so each node has only it's own private key). The example uses rsync-over-ssh First all the config files without the hostkeys should be distributed: rsync -avzessh /etc/gvpe --exclude hostkeys rsync -avzessh /etc/gvpe --exclude hostkeys rsync -avzessh /etc/gvpe --exclude hostkeys Then the hostkeys should be copied: rsync -avzessh /etc/gvpe/hostkeys/first rsync -avzessh /etc/gvpe/hostkeys/second rsync -avzessh /etc/gvpe/hostkeys/third You should now check the configuration by issuing the command gvpectrl -c /etc/gvpe -s on each node and verify it's output. STEP 4: starting gvpe You should then start gvpe on each node by issuing a command like: gvpe -D -l info first # first is the nodename This will make the gvpe daemon stay in foreground. You should then see "connection established" messages. If you don't see them check your firewall and routing (use tcpdump ;). If this works you should check your networking setup by pinging various endpoints. To make gvpe run more permanently you can either run it as a daemon (by starting it without the -D switch), or, much better, from your inittab or equivalent. I use a line like this on all my systems: t1:2345:respawn:/opt/gvpe/sbin/gvpe -D -L first >/dev/null 2>&1 STEP 5: enjoy ... and play around. Sending a -HUP (gvpectrl -kHUP) to the daemon will make it try to connect to all other nodes again. If you run it from inittab, as is recommended, gvpectrl -k (or simply killall gvpe) will kill the daemon, start it again, making it read it's configuration files again. SEE ALSO
gvpe.osdep(5) for OS-dependent information, gvpe.conf(5), gvpectrl(8), and for a description of the transports, protocol, and routing algorithm, gvpe.protocol(7). The GVPE mailing list, at <>, or AUTHOR
GVPE itself is distributed under the GENERAL PUBLIC LICENSE (see the file COPYING that should be part of your distribution). In some configurations it uses modified versions of the tinc vpn suite, which is also available under the GENERAL PUBLIC LICENSE. 2.2 2008-09-01 GVPE(5)

Featured Tech Videos