NEED MAINTENANCE ON DISK


 
Thread Tools Search this Thread
Top Forums UNIX for Dummies Questions & Answers NEED MAINTENANCE ON DISK
# 1  
Old 04-14-2010
NEED MAINTENANCE ON DISK

hELLO PEOPLE I AM DETECTING IN THE MIRROR ON MY SPARC THAT IS A DISK ASKING FOR MAINTENANCE.

d0: Mirror
Submirror 0: d10
State: Needs maintenance
Submirror 1: d20
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 6143040 blocks (2.9 GB)

d10: Submirror of d0
State: Needs maintenance
Invoke: after replacing "Maintenance" components:
metareplace d0 c0t0d0s0 <new device>
Size: 6143040 blocks (2.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s0 0 No Last Erred Yes

d20: Submirror of d0
State: Needs maintenance
Invoke: metasync d0
Size: 6143040 blocks (2.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s0 0 No Okay Yes

i don't understand i have to change the disk? but how do i boot later?

i do a metareplace -e (for tryng to sync the same disk) d0 c0t0d0s0
metareplace: u2: d0: c0t0d0s0: component in invalid state to replace - Replace "Maintenance" components first

Is the disk0 is failing and with that disk i boot how con i change this and fix it? Thank you

pd: i do metasync d0 but finish and always ask the same.
 
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. Solaris

Maintenance mode

i booted into maintenance mode boot -- -s from the console I got the Root password for system maintenance (control-d to bypass) I did control -d and then logged in it told me that I was booting into boot -s but after I did a control -d and logged in who -r shows ... (9 Replies)
Discussion started by: goya
9 Replies

2. SuSE

Library Maintenance

How are libraries created and maintained? I tried the following to add prog.o to an existing library ar -r library.so prog.o but the output is "File format not recognized", on the other hand nm --print-armap library.so does print a table of contents. (2 Replies)
Discussion started by: jgt
2 Replies

3. Solaris

Operation and Maintenance

I gurus of Solaris, I need to do a Procedure concerning in the Maintenance of Solaris Server. What are the parameters that I must be see Periodically in a Server. For example the space I (df -h) must be each week.- In this server exist a Database aplication (Oracle), and log's that increase or... (4 Replies)
Discussion started by: andresguillen
4 Replies

4. AIX

maintenance level

Hello I have a question. I have several box with $ oslevel -s 5300-06-01-0000 My questions are: 1.-How long I can keept my actual technology level (in time) before I updated to the next technology level? My other question is If I have to update to the next technology level. ... (2 Replies)
Discussion started by: lo-lp-kl
2 Replies

5. Solaris

Disk needs maintenance

Hi there, It's my first time here. I have an hard drive need a maintenance. here the result of metastat : Sun Microsystems Inc. SunOS 5.9 Generic May 2002 host2{11}: metastat d1: RAID State: Needs Maintenance Invoke: metareplace d1 c2t2d0s1 <new device> Interlace:... (3 Replies)
Discussion started by: Juterassee
3 Replies

6. UNIX for Dummies Questions & Answers

Disc Needs Maintenance

Hello All Here I am using Sun V880 server which have discsuit pack of 8 discs with 2 sub mirrors each. Everything was fine for the last 1 year. Now I am getting problem of taking backup of the server. After analysis what I got that each 2nd submirrors are in NEEDS MAINTENANCE status. What... (5 Replies)
Discussion started by: ailnilanjan
5 Replies

7. UNIX for Advanced & Expert Users

System Maintenance

How do I go about doing this??? Is there something to it other than cleaning up useless files?? if you have knowledge concerning this, please give your suggestions also, is it possible or safe to compress an entire filesystem. how do you go about doing this??? any information is appreciated (7 Replies)
Discussion started by: IMPORTANT
7 Replies

8. Post Here to Contact Site Administrators and Moderators

Board Maintenance

Just a remark now the board has grown to considerable proportion. I see too little of an active hand(s) maintaning the boards, clipping away dead posts, moving posts that were created in the wrong forums etc. It's a bit tiring to see alot of threads ending in: this has been covered before, do a... (7 Replies)
Discussion started by: patvdv
7 Replies
Login or Register to Ask a Question
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)