9 More Discussions You Might Find Interesting
1. Web Development
I am having problems accessing a new site I am trying to setup on my CentOS 7 VM. I have added a vhosts file for it, but when I access easydev.com in the browser it continues to redirect me to the old (now disabled) dev site of crmpicco.dev. Is there something wrong with my config?
# apachectl... (3 Replies)
Discussion started by: crmpicco
3 Replies
2. IP Networking
Hi @all,
I try to connect 2 LANs with IPSec/Openswan
LAN 1: 192.168.0.0/24
LAN 2: 192.168.1.0/24
This is my Config:
conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ... (1 Reply)
Discussion started by: bahnhasser83
1 Replies
3. IP Networking
Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? "
A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that... (0 Replies)
Discussion started by: Ayaerlee
0 Replies
4. IP Networking
Hi,
I am trying to establish vpn between my linux server and cisco asa at client side.
I installed openswan on my cent os.
Linux Server
eth0 - 182.2.29.10
Gateway - 182.2.29.1
eth1 - 192.9.200.75
I have simple IPtables Like
WAN="eth0"
LAN="eth1" (0 Replies)
Discussion started by: ashokvpp
0 Replies
5. UNIX for Advanced & Expert Users
I am looking to forward the following with masking via my .htaccess file:
www.mywebsite.com/origpage www.mywebsite.com/newpage
I do not want to forward the entire site, just this one page with masking. Neither page has an extension. I am able to forward with .htaccess - but it does not mask the... (1 Reply)
Discussion started by: globalnerds
1 Replies
6. Emergency UNIX and Linux Support
BAT:0310:2009-08-0:Y4 :H:D:00003721:03103721.IFH:00138770:05767:00000000001279'
EXR:CLP:912.570000'
STA:A:9071559:2009-08-10::Wer::Mrs'
DEF::531.97:531.97:310221661617::+ABC:BAL:1:N::::5:40.00:0.00:2009-08-10:CN:1111111111109962::3:N:missc :N:PH:00010833:... (5 Replies)
Discussion started by: mad_man12
5 Replies
7. Shell Programming and Scripting
I have a pipe delimited file that I need to 'mask' to before loading to keep some data confidential. I need to maintain the first 4 bytes of certain columns and replace the remaining bytes with an 'x'. I would like to maintain spaces but it's not a requirement.
Example, need to mask columns 2... (2 Replies)
Discussion started by: 1superdork
2 Replies
8. IP Networking
Setup a site to site VPN between two cisco routers.
One of the site locations is unable to access ports such as https://example.com:9001
How do I let them go into port 9001?
They can ssh, ftp, telnet and everything else.
Is this a VPN issue or ACL access issue?
I put
permit ip host... (0 Replies)
Discussion started by: photon
0 Replies
9. IP Networking
Is it possible for a internal LAN to mask a IP e.g. i have a server ip running the intranet ip being 192.168.0.8 and i want to make that like www.intranet.com is this possible on a internal network ? (1 Reply)
Discussion started by: perleo
1 Replies
UPSSET.CONF(5) NUT Manual UPSSET.CONF(5)
NAME
upsset.conf - Configuration for Network UPS Tools upsset.cgi
DESCRIPTION
This file only does one job--it lets you convince upsset.cgi(8) that your system's CGI directory is secure. The program will not run until
this file has been properly defined.
SECURITY REQUIREMENTS
upsset.cgi(8) allows you to try login name and password combinations. There is no rate limiting, as the program shuts down between every
request. Such is the nature of CGI programs.
Normally, attackers would not be able to access your upsd(8) server directly as it would be protected by the LISTEN directives in your
upsd.conf(5) file, tcp-wrappers (if available when NUT was built), and hopefully local firewall settings in your OS.
upsset runs on your web server, so upsd will see it as a connection from a host on an internal network. It doesn't know that the connection
is actually coming from someone on the outside. This is why you must secure it.
On Apache, you can use the .htaccess file or put the directives in your httpd.conf. It looks something like this, assuming the .htaccess
method:
<Files upsset.cgi>
deny from all
allow from your.network.addresses
</Files>
You will probably have to set "AllowOverride Limit" for this directory in your server-level configuration file as well.
If this doesn't make sense, then stop reading and leave this program alone. It's not something you absolutely need to have anyway.
Assuming you have all this done, and it actually works (test it!), then you may add the following directive to this file:
I_HAVE_SECURED_MY_CGI_DIRECTORY
If you lie to the program and someone beats on your upsd through your web server, don't blame me.
SEE ALSO
upsset.cgi(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/22/2012 UPSSET.CONF(5)