At work I am trying to get this one Linux machine (let's call it ctesgm07) to behave like another Linux machine that we have (let's call it test007).
test007 returns the following version info:
cat /etc/debian_version: lenny/sid
uname -a: Linux test007 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux
ctesgm07 returns the following version info:
cat /etc/debian_version: 4.0
uname -a: Linux ctesgm07 2.6.21-1-686 #1 SMP Sat May 19 01:13:28 UTC 2007 i686 GNU/Linux
The test007 machine currently acts as a server for a device that has an ethernet cable attached to it, and that ethernet cable goes into an ethernet-to-USB adapter, which is plugged into one of the USB ports of test007. The device has successfully requested an IP address (192.168.1.100) from test007.
Now I want to set up the ctesgm07 machine to act as a server for the same type of device. But the DHCP server on ctesgm07 is failing to start:
Here is what got written to /var/log/syslog:
I have attached the /etc/dhcp3/dhcpd.conf from ctesgm07. I could have sworn the DHCP server was working when we used this machine several months ago for something else, but I could be mistaken. I also tried the dhcpd.conf from the test007 machine, but then it failed on ctesgm07 and output the same error to /var/log/syslog. That one is attached too.
Another thing I am wondering about is that the test007 machine shows the following when I run ifconfig:
eth0 would be for its connection to the corporate network, and eth1 would be its USB-to-ethernet connection to the child device attached to it. But when I run ifconfig on ctesgm07, I get:
It has eth0, but there is no eth1, even though I do have a child device attached to it via an ethernet-to-USB adapter. How do I get eth1 to show up?
Hi, I use ubuntu 16.04 desktop with ufw (default setup + 22, 80, 443 ports open).
I connect directly to ISP using pppoe over eth0. I also have eth1 which when disabled the websites are accessible in browser. When starting eth1 with auto dhcp the websites are no longer accessible in browser (give... (3 Replies)
hellow everbody.
iam using 32 bit centos 6.2 on my desktop and iam new to linux. i have eth0 and eth1 on my desktop. so i have some problems i have menson here:
i have edited:
etc/sysctl.conf
net.ipv4.ip_forward = 1
and i have edited iptables too
# iptables -t nat -A... (2 Replies)
Hi frnds
I am testing DHCP server on vmware.I have two REDHAT 9 vmware machine.DHCP is installed on one machine and second machine is using as a client .I have configured DHCP with Ip Address ,Mask and Gateway.But client machine is not getting ip address.When i type ifconfig command on client it... (6 Replies)
Hi,
I'm installing a DHCPD Server with the packages from a distro SLES11 SP1 (dhcp-server-3.1.1-7.12).
And a DNS Server with PowerDNS:
pdns-recursor-3.3-1
pdns-static-3.0-1
The DHCP update de DNS Server, but PowerDNS is not RFC 2135 compliant, and I have to update the MySQL register... (5 Replies)
Hi,
This is rather a question from a "user" than from a sys admin, but I think this forum is apropriate for the question.
I have an adress with automatic email forwarding and for some senders (two hietherto), emails are bouncing. This has really created a lot of problems those two time so I... (0 Replies)
I just finished setting up a Kickstart Server for our RHEL 5 installs. It's configured to use the PXE boot and NFS for the installation. Everything works fine when I just build one machine at a time. The installation works from begining to end.
But when I try the install three machines at... (5 Replies)
1) when user login to the server the session got colosed. How will resolve?
2) While firing the command ls -l we are not able to see the any files in the director. but over all view the file system using the command df -g it is showing 91% used. what will be the problem?
Thanks in advance. (1 Reply)
Hi all,
I am experiencing a problem with dhcp broadcast packages. these broadcast packages are seen on bge1 and bge1:1 interfaces but somehow they are not seen at bge771001 interface which is second virtual interface on the bge1 interface.
I have a server on which I configured it as working... (2 Replies)
I just installed Mandrake (Caldera) Verion 7.0 on my PC. The problem is I can not grab the and IP from my Router (running DHCP Server). I went to the root# and type linuxconf and it pops up for me the GUI, I have select "Enable" and "DHCP" but when I in Root#, type "ifconfig" it shows me the IP... (5 Replies)