9 More Discussions You Might Find Interesting
1. IP Networking
Hi.
Can you please help me with a routing problem?
There are 2 networks:
192.168.10.0/24 (eth0)
192.168.11.0/24 (eth0:1)
The default gateway is 192.168.10.1
iPv4 routing is already enabled and working.
With vpnc I've built up an VPN connection and can access my home network... (0 Replies)
Discussion started by: tschmi
0 Replies
2. Cybersecurity
Hey everyone. I have a problem, but it may be my lack of understanding that is the cause. Ok so I attend a technical school, and needless to say there's a lot of wannabe hackers, pranksters and what not.
So from my laptop I'd like to connect to the wireless AP's around campus, but security is a... (1 Reply)
Discussion started by: Lost in Cyberia
1 Replies
3. IP Networking
I have a Cisco 1841 router configured as Easy VPN Server. Here is the configuration of the router:
Cisco# Cisco#show running-config Building configuration... Current configura - Pastebin.com
I have a Centos 5.7 server with installed Cisco VPN client for Linux. The client successfully... (0 Replies)
Discussion started by: rcbandit
0 Replies
4. IP Networking
I was given my pcf file to login to work from home and wanted to use OpenVPN instead of the Cisco VPN client software. Can I use this pcf file with OpenVPN? I attempted to use vpnc:
http://wiki.centos.org/HowTos/vpnc
but it just times out
?? (2 Replies)
Discussion started by: metallica1973
2 Replies
5. SCO
I would like to know if anyone has a way to PRINT TO a printer attached to a Windows 7 PC, from SCO, while logged in via a VPN connection.
I am able to attach to a Samba share on the SCO server for files while attached to the VPN, so I know my Samba is workling - but my print jobs return:
... (2 Replies)
Discussion started by: tbb999
2 Replies
6. Solaris
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Discussion started by: labdakos
4 Replies
7. IP Networking
Hello,
I have question about VPN connection thats,
I have two networks
1-Office Network
2-Home Network
both are connected to internet
i have in Office network PPTP VPN Server with real or static ip and on the home network all clients working with local ip
Now ,
I need to connect to... (3 Replies)
Discussion started by: LinuxCommandos
3 Replies
8. Linux
Trying to connect to my companies VPN with vpnc but I keep getting an error that the target failed to respond. I run wireshark and see that my host sends out a few ISAKMP packets but gets no response and gives up.
Any ideas what can cause this to happen? Is there someway that UDP traffic could... (0 Replies)
Discussion started by: osulinux
0 Replies
9. Shell Programming and Scripting
Hi All:
I need a script that can be timed to run every half hour to an hour to run a traceroute through a VPN to test that a connection is still up from a Win XP system. Which would be the best, C++ or Perl and what are some good resources to look at.
(If anyone has a script to do this... (1 Reply)
Discussion started by: maxhewitt
1 Replies
openvpn_selinux(8) SELinux Policy openvpn openvpn_selinux(8)
NAME
openvpn_selinux - Security Enhanced Linux Policy for the openvpn processes
DESCRIPTION
Security-Enhanced Linux secures the openvpn processes via flexible mandatory access control.
The openvpn processes execute with the openvpn_t SELinux type. You can check if you have these processes running by executing the ps com-
mand with the -Z qualifier.
For example:
ps -eZ | grep openvpn_t
ENTRYPOINTS
The openvpn_t SELinux type can be entered via the openvpn_exec_t file type.
The default entrypoint paths for the openvpn_t domain are the following:
/usr/sbin/openvpn
PROCESS TYPES
SELinux defines process types (domains) for each process running on the system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux openvpn policy is very flexible allowing users to setup their openvpn
processes in as secure a method as possible.
The following process types are defined for openvpn:
openvpn_unconfined_script_t, openvpn_t
Note: semanage permissive -a openvpn_t can be used to make the process type openvpn_t permissive. SELinux does not deny access to permis-
sive process types, but the AVC (SELinux denials) messages are still generated.
BOOLEANS
SELinux policy is customizable based on least access required. openvpn policy is extremely flexible and has several booleans that allow
you to manipulate the policy and run openvpn with the tightest access possible.
If you want to determine whether openvpn can connect to the TCP network, you must turn on the openvpn_can_network_connect boolean. Disabled
by default.
setsebool -P openvpn_can_network_connect 1
If you want to determine whether openvpn can read generic user home content files, you must turn on the openvpn_enable_homedirs boolean.
Enabled by default.
setsebool -P openvpn_enable_homedirs 1
If you want to allow openvpn to run unconfined scripts, you must turn on the openvpn_run_unconfined boolean. Enabled by default.
setsebool -P openvpn_run_unconfined 1
If you want to allow users to resolve user passwd entries directly from ldap rather then using a sssd server, you must turn on the authlo-
gin_nsswitch_use_ldap boolean. Disabled by default.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow all daemons to write corefiles to /, you must turn on the daemons_dump_core boolean. Disabled by default.
setsebool -P daemons_dump_core 1
If you want to enable cluster mode for daemons, you must turn on the daemons_enable_cluster_mode boolean. Enabled by default.
setsebool -P daemons_enable_cluster_mode 1
If you want to allow all daemons to use tcp wrappers, you must turn on the daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals, you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny any process from ptracing or debugging any other processes, you must turn on the deny_ptrace boolean. Enabled by
default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by
default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to allow confined applications to run with kerberos, you must turn on the kerberos_enabled boolean. Enabled by default.
setsebool -P kerberos_enabled 1
If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.
setsebool -P nis_enabled 1
If you want to allow confined applications to use nscd shared memory, you must turn on the nscd_use_shm boolean. Disabled by default.
setsebool -P nscd_use_shm 1
If you want to support ecryptfs home directories, you must turn on the use_ecryptfs_home_dirs boolean. Disabled by default.
setsebool -P use_ecryptfs_home_dirs 1
If you want to support NFS home directories, you must turn on the use_nfs_home_dirs boolean. Disabled by default.
setsebool -P use_nfs_home_dirs 1
If you want to support SAMBA home directories, you must turn on the use_samba_home_dirs boolean. Disabled by default.
setsebool -P use_samba_home_dirs 1
NSSWITCH DOMAIN
If you want to allow users to resolve user passwd entries directly from ldap rather then using a sssd server for the openvpn_t, you must
turn on the authlogin_nsswitch_use_ldap boolean.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow confined applications to run with kerberos for the openvpn_t, you must turn on the kerberos_enabled boolean.
setsebool -P kerberos_enabled 1
PORT TYPES
SELinux defines port types to represent TCP and UDP ports.
You can see the types associated with a port by using the following command:
semanage port -l
Policy governs the access confined processes have to these ports. SELinux openvpn policy is very flexible allowing users to setup their
openvpn processes in as secure a method as possible.
The following port types are defined for openvpn:
openvpn_port_t
Default Defined Ports:
tcp 1194
udp 1194
MANAGED FILES
The SELinux process type openvpn_t can manage files labeled with the following file types. The paths listed are the default paths for
these file types. Note the processes UID still need to have DAC permissions.
cluster_conf_t
/etc/cluster(/.*)?
cluster_var_lib_t
/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?
cluster_var_run_t
/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/cpglockd.pid
/var/run/corosync.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk
faillog_t
/var/log/btmp.*
/var/log/faillog.*
/var/log/tallylog.*
/var/run/faillock(/.*)?
krb5_host_rcache_t
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0
lastlog_t
/var/log/lastlog.*
net_conf_t
/etc/hosts[^/]*
/etc/yp.conf.*
/etc/denyhosts.*
/etc/hosts.deny.*
/etc/resolv.conf.*
/etc/sysconfig/networking(/.*)?
/etc/sysconfig/network-scripts(/.*)?
/etc/sysconfig/network-scripts/.*resolv.conf
/etc/ethers
/etc/ntp.conf
openvpn_etc_rw_t
/etc/openvpn/ipp.txt
openvpn_status_t
/var/log/openvpn-status.log.*
openvpn_tmp_t
openvpn_var_lib_t
/var/lib/openvpn(/.*)?
openvpn_var_log_t
/var/log/openvpn.*
openvpn_var_run_t
/var/run/openvpn(/.*)?
/var/run/openvpn.client.*
root_t
/
/initrd
security_t
/selinux
FILE CONTEXTS
SELinux requires files to have an extended attribute to define the file type.
You can see the context of a file using the -Z option to ls
Policy governs the access confined processes have to these files. SELinux openvpn policy is very flexible allowing users to setup their
openvpn processes in as secure a method as possible.
EQUIVALENCE DIRECTORIES
openvpn policy stores data with multiple different file context types under the /var/run/openvpn directory. If you would like to store the
data in a different directory you can use the semanage command to create an equivalence mapping. If you wanted to store this data under
the /srv dirctory you would execute the following command:
semanage fcontext -a -e /var/run/openvpn /srv/openvpn
restorecon -R -v /srv/openvpn
STANDARD FILE CONTEXT
SELinux defines the file context types for the openvpn, if you wanted to store files with these types in a diffent paths, you need to exe-
cute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.
semanage fcontext -a -t openvpn_etc_rw_t '/srv/openvpn/content(/.*)?'
restorecon -R -v /srv/myopenvpn_content
Note: SELinux often uses regular expressions to specify labels that match multiple files.
The following file types are defined for openvpn:
openvpn_etc_rw_t
- Set files with the openvpn_etc_rw_t type, if you want to treat the files as openvpn etc read/write content.
openvpn_etc_t
- Set files with the openvpn_etc_t type, if you want to store openvpn files in the /etc directories.
openvpn_exec_t
- Set files with the openvpn_exec_t type, if you want to transition an executable to the openvpn_t domain.
openvpn_initrc_exec_t
- Set files with the openvpn_initrc_exec_t type, if you want to transition an executable to the openvpn_initrc_t domain.
openvpn_status_t
- Set files with the openvpn_status_t type, if you want to treat the files as openvpn status data.
openvpn_tmp_t
- Set files with the openvpn_tmp_t type, if you want to store openvpn temporary files in the /tmp directories.
openvpn_unconfined_script_exec_t
- Set files with the openvpn_unconfined_script_exec_t type, if you want to transition an executable to the openvpn_unconfined_script_t
domain.
openvpn_var_lib_t
- Set files with the openvpn_var_lib_t type, if you want to store the openvpn files under the /var/lib directory.
openvpn_var_log_t
- Set files with the openvpn_var_log_t type, if you want to treat the data as openvpn var log data, usually stored under the /var/log
directory.
openvpn_var_run_t
- Set files with the openvpn_var_run_t type, if you want to store the openvpn files under the /run or /var/run directory.
Paths:
/var/run/openvpn(/.*)?, /var/run/openvpn.client.*
Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use
the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.
COMMANDS
semanage fcontext can also be used to manipulate default file context mappings.
semanage permissive can also be used to manipulate whether or not a process type is permissive.
semanage module can also be used to enable/disable/install/remove policy modules.
semanage port can also be used to manipulate the port definitions
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux policy settings.
AUTHOR
This manual page was auto-generated using sepolicy manpage .
SEE ALSO
selinux(8), openvpn(8), semanage(8), restorecon(8), chcon(1), sepolicy(8) , setsebool(8), openvpn_unconfined_script_selinux(8), open-
vpn_unconfined_script_selinux(8)
openvpn 14-06-10 openvpn_selinux(8)
03-03-2020
