SCO 5.0.5 installation on 80GB HDD


 
Thread Tools Search this Thread
Top Forums UNIX for Advanced & Expert Users SCO 5.0.5 installation on 80GB HDD
# 1  
Old 10-25-2007
Data SCO 5.0.5 installation on 80GB HDD

Hello,

I have a P4, 2.4GHz, 256MB ASROCK mainboard: I am trying to install sco 5.0.5 on an 80gb hdd IDE [seagate].

I have tried the following techniques:


1. using the updated wd btld image- no success [signal 6 termination error]
2. defbootstr biosgeom [even though the bios correclty identifies the drive]
3. use interactive divvy, make adjustments using dkinit/dparam during installation - installs fine but boots with stage 1 failure. I have also tried to repair the stage 1 failure but I hit another strange problem- my emergency disks wont just boot! I have recreated them many times and no luck.
4. I have even tried booting "tools" at prompt using installation disk and running the debug program but cant mount the drive let alone run fsck!

Now this is probably my thirtieth sco 5.0.5 installation and I have had problems before but all my previous installations are working great, I have even installed several RAID upto 260GB but this one.....

Please help I have run out of ideas.

I appreciate your help

clarence
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

BMW GT1 DIS - SCO 5.0 and Oracle 7 Root HDD Clone - IBM T30

Greeting All Diag tool HDD clone SCO 5 + Oracle 7 DB ( IBM T30 ) I am new to this forum and my knowledge on computers OS is average . I have just acquired a factory diag tool for BMW/RR/MINI from a retired mechanic. Its runs on a IBM T30 laptop with a Unix/Oracle DB system. Sco 5... (8 Replies)
Discussion started by: bmw635
8 Replies

2. SCO

Dd (raw) image of SCO 5.0.6 mount as second hdd

Hi all I have read about mounting crashed HDD from a sco system in this forum. However this I received an image on raw format of the crashed system that was using an IDE HDD. Which method should I mount my image? IDE scsi or USB? The image is stores in an external connected through USB . Also... (4 Replies)
Discussion started by: OrangeKenny
4 Replies

3. Solaris

Problems cloning Solaris 10 x86 Installation to bigger HDD

Dear All, I have been trying to move my existing Solaris Installation (x86, 10/08) to a bigger HDD. So I created a 22 cylinder boot partition and used the rest of the space for a Solaris2 partition. Then I created slices same size like on my current disk. I copied all files with cpio and... (3 Replies)
Discussion started by: BigT79
3 Replies

4. Solaris

Solaris x86 installation using jumpstart does not local boot ( boot from hdd)

I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Discussion started by: hemalsid
9 Replies

5. Solaris

New HDD Installation

All, I am a complete grasshopper when it comes to Unix, so here goes. I have a Solaris 9 server, running two 36GB HDD in a mirrored configuration. I am running low on disk space, and have purchased an additional 145GB HDD. Can anyone point me in the direction to some documentation on how to... (1 Reply)
Discussion started by: ptvenom427
1 Replies

6. SCO

Sco 5.06 How To Mount A 2nd Hdd Help Help!!!!

Hi guys, I have this problem , One of our client's hdd went down and we cannot boot up the machine , I've installed a new hdd with a fresh copy of SCO 5.0.6 same as the one in the old HDD, i think the data still good in the old HDD. My question!!! How can i access the data from the fresh... (4 Replies)
Discussion started by: josramon
4 Replies

7. UNIX for Dummies Questions & Answers

How to prepare HDD for Installation of Solaris

Hi All, I need some advice on dual booting a dell box so that I can have WinXP and Solaris 10 OS there. The question is, what is the best way of preparing the hdd for prior to installation? I have used created two partition, one for xp and the and the other unallocated partition for Solaris.... (3 Replies)
Discussion started by: S0laris_B0y
3 Replies

8. SCO

SCO 5.0.7 and Serial ATA HDD question

Hi guys, I have this quick question , is it posible to isntall SCO 5.0.7 on a serial ATA and if it is can you tell me how or maybe a website that has some info about this. I'm not using any raid, just one HDD. Thanks a lot (0 Replies)
Discussion started by: josramon
0 Replies

9. Shell Programming and Scripting

IInd Hard Disk Mounting Problem on 1st HDD On SCO UNIX Open Server

Hi Engg. ! :mad: I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching... (0 Replies)
Discussion started by: Niraj Gopal Sha
0 Replies

10. UNIX for Advanced & Expert Users

SCO UNIX HDD full backup

HI ALL, I need to backup HDD with SCO UNIX. I need to have a full functionaly backup of this hard disk. Does anybody have any tool or subsription how to do it. I tried some SW, but after when I tried to use this copy of my original disk "can not find a root directory". Thanks in advance. (1 Reply)
Discussion started by: jardas
1 Replies
Login or Register to Ask a Question
install-solaris(1M)													       install-solaris(1M)

NAME
install-solaris - install the Solaris operating system SYNOPSIS
install-solaris install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation, install-solaris invokes either a text-based installer or a graphical installer. The following minimum requirements for physical memory dictate which features are available during installation: For SPARC machines: 128 MB Minimum physical memory for all installation types 128 MB Minimum physical memory required for windowing system 384 MB Minimum physical memory required for graphical-based installation For x86 machines: 256 MB Minimum physical memory for all installation types 256 MB Minimum physical memory required for windowing system 512 MB Minimum physical memory required for graphical-based installation In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea- tures available. install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more details. install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the installation media. Refer to the for disk space requirements. Refer to the for more information on the various menus and selections. See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcdrom (Solaris instal- | | |lation media) | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ pkginfo(1), install(1M), pkgadd(1M), attributes(5) It is advisable to exit install-solaris by means of the exit options in the install-solaris menus. 23 Sep 2005 install-solaris(1M)