10 More Discussions You Might Find Interesting
Hello, I have an AIX6.1 machine which is a nim client to my nim master which is also AIX6.1 machine. I had some problem to perform an installation on my client using smit nim . i removed /etc/niminfo file in order to do the initialization again but when i run the command niminit -a name=client... (0 Replies)
Discussion started by: omonoiatis9
2. IP Networking
I started to work in a small company which doesn't have infrastructure and I need to built it.
My problem is: I am a student with theoretical knowledge but without practical one so I don't have any ideas how to solve my problem.
I installed on CentOS 6.4 DNS and DHCP. This... (1 Reply)
Discussion started by: solaris_user
I want to have a message send & receive through 2 half-duplex pipes
Flow of data
top half pipe
stdin--->parent(client) fd1--->pipe1-->child(server) fd1
bottom half pipe
child(server) fd2---->pipe2--->parent(client) fd2--->stdout
I need to have boundary structed message... (1 Reply)
Discussion started by: ouou
I need some recommendations as to how I can create a single jumpstart server over multiple subnets and what would be the best physical server for this purpose.
Thanks . (1 Reply)
Discussion started by: gunnervarma
5. UNIX for Advanced & Expert Users
Having an issue with a multihomed global zone hosting zones on different subnets.
The issue is with the dev zone that is hosted on the non-default network.
Any help, other than going to exclusive IP, as I have one card for admin ntwk for both zones, would be appreciated.
... (1 Reply)
Discussion started by: 22blaze
I have two networks which is not connected to each other. Each network has its own internet connection. I also have one Solaris machine with two NICs connected to both of the networks.
How do I use the Solaris to connect both network so that hosts from either side of the network can... (9 Replies)
Discussion started by: Ahmad Pakhri
7. IP Networking
I have a routing problem that I need to solve for both Windows and Linux.
In our test lab, I've set up a small network that is separated from the rest of the work by a firewall. One interface is on the 15.8.152 network, the other is on the 192.168.100 network.
I can already get to the... (2 Replies)
Discussion started by: thomn8r
I am gettin problem while sending and recieving data through seial port...
when I am sending Data then the reciever end is not able to recieve that data .....
Reciever end is running in infinite loop just polling after some time to check that there is data on the port and then again... (9 Replies)
Discussion started by: arunchaudhary19
I have a pSeries 550 and several Xerox printers I need to print to from there. I can define the printers via the Xerox "xpadmin" utility for all the machines locally (in my building, .244.xxx subnet), but if I go to a different subnet (say .131.xxx) I can not apply any changes.
I can... (1 Reply)
Discussion started by: kjbaumann
I would like to ask you for a little help with program I'm working on. I have problems with signals and synchronizing processes (I'm quite new to this part of programming).
Process "parent" creates new child process "child1" and this process creates new child process "child2". The... (2 Replies)
Discussion started by: Nightwright