Login or Register to Ask a Question and Join Our Community


UNIX for Advanced & Expert Users

Slow printing to network printers using CUPS

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Top Forums UNIX for Advanced & Expert Users Slow printing to network printers using CUPS
# 1  
Old 06-28-2012
Slow printing to network printers using CUPS
Hi Guys,

I've inherited a mess of an infrastructure in my new job, there hasn't been a sys admin in post for about a year, so things are falling apart. The first thing to break after I started was the printer server. I have it working again, and people can print, however it's very slow, slower than before.

I set up cups/samba from scratch so that windows users can simply access the server share, double click on the printer and then use that printer.

I did this using the cups-windows drivers and it works, however it's so slow with pdfs that it is unreal, ~3mins per page for some things.

My assumption is that it is the printer drivers, but that's just a guess since nothing on the printers have been changed. (They're Konika bizhub printers). In the last week I've been searching for a way to install the vendor drivers to the print server, but I haven't found a way yet.

Any help to diagnose what is happening or to install the drivers would be much appreciated.

Kind Regards,

Rudiga.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

[CUPS] printers not shown after a while

I'm currently running a CUPS server and it shows the printers on other computers just fine, but after a while they disappear. I found out, that restarting /etc/init.d/cups-browsed fixes the problem (for about 15min). When the printers disappear, the cups-browsed service is still running, so I... (0 Replies)
Discussion started by: Gajeela
0 Replies

2. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and... (4 Replies)
Discussion started by: moshesa
4 Replies

3. UNIX for Advanced & Expert Users

Troubleshooting printing through Cups

Hello Experts, I have been facing an issue with printing through cups configured on Linux server. All was going on well but all of a sudden the printers started giving an error message, "Unsupported format application/postscript!" and we cant get any prints of any printer. Need your help as... (2 Replies)
Discussion started by: Rockyc3400
2 Replies

4. Red Hat

cups printing error

Hi All, Having searched for a solution to this issue i found no suggestions which help my particular problem. I am getting the following error message on 1 of the 3 printers i have configured: recoverable: Network host 'xxx.xxx.xxx.xxx' is busy; will retry in 30 seconds All 3 printers are... (0 Replies)
Discussion started by: Tommyk
0 Replies

5. Hardware

Cups-compatible PPD for IBM 6400 printers

We've inherited some IBM Infoprint 6400 printers for use with our internal warehouse management software. Now I'm looking for a driver, or a compatibility list for said printers. I found that IBM does provide drivers for it (link), but due to our policies I can't download it. (who provides drivers... (0 Replies)
Discussion started by: pludi
0 Replies

6. Shell Programming and Scripting

Scan network for printers

My stupid D-Link DIR-320 router does not give the user the IP address of the printer attached to it's USB port. Instead, it provides a Windows EXE file for printer configuration, which is not an option for use Debian users. Is there a script that can scan the network looking for network printers in... (4 Replies)
Discussion started by: dotancohen
4 Replies

7. Slackware

CUPS setup / dev/lp0 perms. ... Slow printing.

Hello, Ive got an HP LaserJet 2100 / parallel interface. I had some troubles getting going due to non-working cups drivers. Updated cups and also used a .ppd.gz file from something HP provided. found the files here... www.linuxprinting.org/show_printer.cgi?recnum=HP-LaserJet_2100 Anyways.... (1 Reply)
Discussion started by: agentrnge
1 Replies

8. UNIX for Dummies Questions & Answers

Slow printing / CUPS - process "parallel" high cpu

Hello. I have a slackware system running cups with an HP laserJet 2100 connected via parallel port in ECP mode. Print jobs are working. Very slowly. 15K test print out of cups takes about 2 minutes to complete. When the printout is on the way to the printer, the process "parallel" uses... (0 Replies)
Discussion started by: agentrnge
0 Replies

9. Shell Programming and Scripting

Script for reporting network printers

Does anyone have a script that would detect (and create a flat-file) of all printing devices (printers/plotters) attached on a network? I need a single script or tool that would allow me to collect a data file for our asset management tool. Example format: manufacturer, model name, serial... (0 Replies)
Discussion started by: glefko
0 Replies

10. UNIX for Dummies Questions & Answers

printing to mulitple printers

I want to send a single report from my application to mulitple printers with one command. I tried using a synomym and assigning it to different printers, but it stops when it finds the first hit. Has anyone done this at the unix level through printcap? (2 Replies)
Discussion started by: MizzGail
2 Replies
Login or Register to Ask a Question

LEARN ABOUT CENTOS

cupsenable

cupsenable(8)							    Apple Inc.							     cupsenable(8)

NAME

       cupsdisable, cupsenable - stop/start printers and classes

SYNOPSIS

       cupsdisable [ -E ] [-U username ] [ -c ] [ -h server[:port] ] [ -r reason ] [ --hold ] destination(s)
       cupsenable [ -E ] [-U username ] [ -c ] [ -h server[:port] ] [ --release ] destination(s)

DESCRIPTION

       cupsenable starts the named printers or classes.

       cupsdisable stops the named printers or classes.  The following options may be used:

       -E
	    Forces encryption of the connection to the server.

       -U username
	    Uses the specified username when connecting to the server.

       -c
	    Cancels all jobs on the named destination.

       -h server[:port]
	    Uses the specified server and port.

       --hold
	    Holds remaining jobs on the named printer.	Useful for allowing the current job to complete before performing maintenance.

       -r "reason"
	    Sets the message associated with the stopped state. If no reason is specified then the message is set to "Reason Unknown".

       --release
	    Releases pending jobs for printing. Use after running cupsdisable with the --hold option to resume printing.

COMPATIBILITY

       Unlike  the  System  V printing system, CUPS allows printer names to contain any printable character except SPACE, TAB, "/", or "#".  Also,
       printer and class names are not case-sensitive.

       The System V versions of these commands are disable and enable. They have been renamed to avoid conflicts with the  bash(1)  build-in  com-
       mands of the same name.

       The  CUPS versions of disable and enable may ask the user for an access password depending on the printing system configuration.  This dif-
       fers from the System V versions which require the root user to execute these commands.

SEE ALSO

       cupsaccept(8), cupsreject(8), cancel(1), lp(1), lpadmin(8), lpstat(1),
       http://localhost:631/help

COPYRIGHT

       Copyright 2007-2013 by Apple Inc.

9 October 2008							       CUPS							     cupsenable(8)