Visit Our UNIX and Linux User Community


bnx1 link : unknown


 
Thread Tools Search this Thread
Top Forums UNIX for Advanced & Expert Users bnx1 link : unknown
# 1  
Old 09-24-2009
bnx1 link : unknown

Hi,

Please could someone advise, how to enable device bnx1 to become up (online). See below for details :

dladm show-dev
e1000g0 link: up speed: 1000 Mbps duplex: full
e1000g1 link: up speed: 1000 Mbps duplex: full
e1000g2 link: up speed: 1000 Mbps duplex: full
e1000g3 link: up speed: 1000 Mbps duplex: full
e1000g4 link: up speed: 1000 Mbps duplex: full
e1000g5 link: unknown speed: 0 Mbps duplex: half
bnx0 link: unknown speed: 100 Mbps duplex: unknown
bnx1 link: unknown speed: 1000 Mbps duplex: unknown

This is system is a HP x86 solaris box, I have checked the bnx.conf file and it is set to :

0 : AutoNegotiate

see below :

speed=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0;


regards,

Tek

Previous Thread | Next Thread
Test Your Knowledge in Computers #849
Difficulty: Medium
Mandatory protocols for all Bluetooth stacks are LMP, L2CAP and SOAP.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

/var/adm/messages (insterface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages Apr 22 16:43:05 Prod-App1 in.routed: interface net0 to 172.16.101.1 turned off Apr 22 16:43:33 Prod-App1 mac: NOTICE: nxge0 link up, 1000 Mbps, full duplex Apr 22 16:43:34 Prod-App1 mac: NOTICE: nxge0 link... (2 Replies)
Discussion started by: javeedkaleem
2 Replies

2. Solaris

/var/adm/messages (interface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# cat /var/adm//messages Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved Apr 20 08:24:18 Prod-App1... (0 Replies)
Discussion started by: javeedkaleem
0 Replies

3. UNIX for Dummies Questions & Answers

[Solved] Symbolic link not allowed or link target not accessible

Hi everybody, I read about treads realted to this issue but they did not resovle issue given below. Please help me resolve issue given below I have html file under /srv/www/htdocs/actual_folder ls actual_folder/ test.html and following link works... (0 Replies)
Discussion started by: newbielgn
0 Replies

4. Programming

g++ fails to link to static library when compilation and link in single command

Hello All, I've encountered a strange behaviour from g++ that doesn't make sense to me. Maybe you can shed some light on it: I have a bunch of source files and want to compile them and link them with a static library liba.a located in /usr/local/lib64 into an executable Approach 1 works... (0 Replies)
Discussion started by: magelord
0 Replies

5. IP Networking

bnx1 link : unknown ?

Hi, Please could someone advise, how to enable device bnx1 to become up (online). See below for details : dladm show-dev e1000g0 link: up speed: 1000 Mbps duplex: full e1000g1 link: up speed: 1000 Mbps duplex: full e1000g2 link: up speed: 1000 Mbps duplex: full e1000g3 link: up speed:... (0 Replies)
Discussion started by: venhart
0 Replies

6. UNIX for Dummies Questions & Answers

Difference between hard link and soft link

Hi Experts, Please help me out to find out difference between a hard link and a soft link. I am new in unix plz help me with some example commands ( for creating such links). Regards S.Kamakshi :) (2 Replies)
Discussion started by: kamakshi s
2 Replies

7. Solaris

PING - Unknown host 127.0.0.1, Unknown host localhost - Solaris 10

Hello, I have a problem - I created a chrooted jail for one user. When I'm logged in as root, everything work fine, but when I'm logged in as a chrooted user - I have many problems: 1. When I execute the command ping, I get weird results: bash-3.00$ usr/sbin/ping localhost ... (4 Replies)
Discussion started by: Przemek
4 Replies

8. UNIX for Dummies Questions & Answers

need some info about symbolic link and hard link

hello folks how y'all doin well i have some questions about symbolic link and hard link hope some one answer me i open terminal and join as root and i wrote ln -s blah blah then i wrote ls i see red file called blah blah but didn't understand what is this can some one explain and... (2 Replies)
Discussion started by: detective linux
2 Replies

9. UNIX for Dummies Questions & Answers

Difference between hard link and soft link in unix

Hi All, Can any one please explain me what is the difference between hard link and soft link in UNIX. Thanks in advance Raja Chokalingam. (2 Replies)
Discussion started by: RAJACHOKALINGAM
2 Replies

10. UNIX for Advanced & Expert Users

Differences between hard link and soft link

Hi all! I'd like to know the differences between hard links and soft links. I've already read the ln manpage, but i'm not quite sure of what i understood. Does a hard link sort of copy the file to a new name, give it the same inode number and same rights? What exactly should I do to do this:... (3 Replies)
Discussion started by: penguin-friend
3 Replies
dladm(1M)																 dladm(1M)

NAME
dladm - configure data-link interfaces SYNOPSIS
dladm show-link [-s [-i interval]] [-p] [name] dladm show-dev [-s [-i interval]] [-p] [dev] dladm create-aggr [-t] [-R root-dir] [-P policy] [-l mode] [-T time] [-u address] -d dev [-d dev] ... key dladm delete-aggr [-t] [-R root-dir] key dladm add-aggr [-t] [-R root-dir] -d dev [-d dev] ... key dladm remove-aggr [-t] [-R root-dir] -d dev [-d dev] ... key dladm modify-aggr [-t] [-R root-dir] [-P policy] [-l mode] [-T time] [-u address] key dladm show-aggr [-L] [-s [-i interval]] [-p] [key] dladm -? The dladm command is used to configure data-links. A configured data-link is represented in the system as a STREAMS DLPI (v2) interface which may be plumbed under protocol stacks such as TCP/IP. Each data-link relies on either a single network device or an aggregation of devices to send packets to or receive packets from a network. The dladm command operates on the following kinds of object: link Data-links, identified by a name aggr Aggregations of network devices, identified by a key dev Network devices, identified by concatenation of a driver name and an instance number Some devices do not support configurable data-links or aggregations. The fixed data-links provided by such devices can be viewed using dladm, but can not be configured. SUBCOMMANDS The following subcommands are supported: show-link Show configuration information for all data-links or the specified data-link. By default, the system is configured to have one data-link for each known network device. show-dev Shows information for all devices or the specified device. create-aggr Creates an aggregation using the given key value from as many dev objects as are specified. A data-link is created by default, and is given a name which is the concatenation of "aggr" and the key value of the aggregation. delete-aggr Deletes the specified aggregation. add-aggr Adds as many dev objects as are specified to the given aggregation. remove-aggr Removes as many dev objects as are specified from the given aggregation. modify-aggr Modifies the parameters of the given aggregation. show-aggr Shows configuration information for all aggregations or the specified aggregation. The following options are supported: -k key --key=key The key of an aggregation. This must be an integer value between 1 and 999. -d dev --dev=dev A device specifier. This must be a concatenation of the name and instance of the driver bound to the device. -P policy --policy=policy Specifies the port selection policy to use for load spreading of outbound traffic. The policy specifies which dev object is used to send packets. A policy consists of a list of one or more layers specifiers separated by commas. A layer specifier is one of the follow- ing: L2 Select outbound device according to source and destination MAC addresses of the packet. L3 Select outbound device according to source and destination IP addresses of the packet. L4 Select outbound device according to the upper layer protocol information contained in the packet. For TCP and UDP, this includes source and destination ports. For IPsec, this includes the SPI (Security Parameters Index.) For example, to use upper layer protocol information, the following policy can be used: -P L4 To use the source and destination MAC addresses as well as the source and destination IP addresses, the following policy can be used: -P L2,L3 -l mode --lacp-mode=mode Specifies whether LACP should be used and, if used, the mode in which it should operate. Legal values are off, active or passive. -T time --lacp-timer=time Specifies the LACP timer value. The legal values are short or long. -u address --unicast=address Specifies a fixed unicast address to be used for the aggregation. If this option is not specified then an address is automatically cho- sen from the set of addresses of the component devices. -L --lacp Specifies whether detailed LACP information should be displayed. -s --statistics Used with the show-link, show-aggr, or show-dev subcommands to show the statistics of data-links, aggregations or devices, respec- tively. -i interval --interval=interval Used with the -s option to specify an interval, in seconds, at which statistics should be displayed. If this option is not specified, statistics will only be displayed once. -t --temporary Specifies that the change is temporary. Temporary changes last until the next reboot. -R root-dir --root-dir=root-dir Specifies an alternate root directory where dladm applies changes. This can be useful in JumpStart scripts, where the root directory of the system being modified is mounted elsewhere. -p --parseable Specifies that configuration information should be displayed in parseable format. -? --help Displays help information. (Stops interpretation of subsequent arguments). EXAMPLES
Example 1: Configuring an aggregation To configure a data-link over an aggregation of devices bge0 and bge1 with key 1, enter the following command: # dladm create-aggr -d bge0 bge1 1 See attributes(5) for descriptions of the following attributes: /usr/sbin +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ /sbin +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsr | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ ifconfig(1M), attributes(5), dlpi(7P) NOTES
The configuration of all objects will persist across reboot. 28 Sep 2005 dladm(1M)

Featured Tech Videos