Samba share on software raid1


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
# 1  
Samba share on software raid1

Hello!
i am having a ubuntu server with two empty disks and connected software raid1 to it.
I am having /mnt/raid folder which i created to mount it.

SO should i now make a share folder inside that or what? I ama bit confused when a raid is present.
# 2  
Assuming that you have completed the following steps:
You created a raid1
You partitioned the space that the raid1 provides like any other hard drive
You created a file system in that one of the partitions (xfs or ext4)

Now you can mount that filesystem somewhere:
You create an empty directory. It looks like you have /mnt/raid. In my opinion that would not be a desirable place /mnt is more for temporary mounting of filesystems. To provide a service like samba probably /srv/samba or /var/samba would be better.
After that you can share that space configuring the samba service.
# 3  
Thank you. I will put itto there but it is tnan on my host machine, i want that folder to be in one of the raid discs,thats the point.
Ubuntu is installed on seperate hard disk.
# 4  
There is no need to be confused because a RAID is present.

When you create a RAID1 (mirror) the pair of disks are afterwards managed as a single drive. The second disk becomes invisible.

Having a RAID1 has no bearing or influence on what the storage is used for, Samba or anything else.

The RAID1 is managed using a single device (/dev/dsk/<whatever>) for mounting/dismounting and will mount/dismount like any other single drive.

So once the RAID1 is formed, ignore the fact it's a RAID and treat it like any other single disk.

You can mount the space anywhere you like and use the storage like any other storage.
# 5  
thanks, i am a bit confused, but thanks for answer.
I had setup a share folder in /mnt/raid/ called test, and it is working via windows but when i deattach one drive it is lost, i cant access and i cant see it in linux also
Code:
cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sdb[0] sdc[1]
      1953383488 blocks super 1.2 [2/2] [UU]
      bitmap: 0/15 pages [0KB], 65536KB chunk

Code:
 lsblk -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT
NAME                    SIZE FSTYPE            TYPE  MOUNTPOINT
sda                   232.9G                   disk
└─sda1                232.9G LVM2_member       part
  ├─johna--vg-root     227G ext4              lvm   /
  └─johna--vg-swap_1   5.9G swap              lvm   [SWAP]
sdb                     1.8T linux_raid_member disk
└─md0                   1.8T ext4              raid1 /mnt/raid
sdc                     1.8T linux_raid_member disk
└─md0                   1.8T ext4              raid1 /mnt/raid

these are permission to folder

Code:
drwxr-xr-x 4 root root 4096 Aug 30 23:12 raid

Code:
drwxr-xr-x   3 root root  4096 Aug 30 12:39 mnt

Code:
drwxr-x--x 2 nobody nogroup  4096 Aug 31 08:54 test

smb.conf
Code:
[test]
path = /mnt/raid/test
valid users = johna myuser
read only = no
browsable = yes
guest ok = no
public= no
create mask = 0644
directory mask = 0755
force user = myuser

# 6  
Hmmmmm.......so both members of the RAID are shown as present and active....good.

So this RAID is on device /dev/md0

(After the RAID is create you should never address these disks as their original devices (/dev/dsk/... or whatever the format is on Ubuntu), only as /dev/md0.

What command are you using to mount the RAID where you want it? Are you specifying /dev/md0? If so, the system should know that it's a RAID mirror and if one disk fails, access to data on the surviving copy should remain.
# 7  
Quote:
Originally Posted by hicksd8
Hmmmmm.......so both members of the RAID are shown as present and active....good.

So this RAID is on device /dev/md0

(After the RAID is create you should never address these disks as their original devices (/dev/dsk/... or whatever the format is on Ubuntu), only as /dev/md0.

What command are you using to mount the RAID where you want it? Are you specifying /dev/md0? If so, the system should know that it's a RAID mirror and if one disk fails, access to data on the surviving copy should remain.
Code:
sudo mount /dev/md0 /mnt/raid

Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Science: Computers
Difficulty: Medium
The last Windows operating system to be based on the Windows 9x kernel was Windows 98.
True or False?

10 More Discussions You Might Find Interesting

1. Red Hat

Samba share - currently not working

Long running samba share. Never have any problems, Suddenly started asking windows users for password - which doesnt work. Tried to manually reset smb password and manually map - still wrong password. Restart samba? (2 Replies)
Discussion started by: psychocandy
2 Replies

2. UNIX for Dummies Questions & Answers

Samba share Windows problem

I have a problem with a Samba share (Debian) on Windows. My config http://pastebin.com/18ncwngr With smbclient -U ftp //xxx.xxx.xxx.xxx/daten I can connect with another Linux Server. Only with Windows it does not work. Deactivate firewall also but I can not connect me. ... (0 Replies)
Discussion started by: PAfreakFlorian
0 Replies

3. Red Hat

Samba share problem in Linux 6.4

Hi , In samba i have shared my home directory, but its showing as a printer. Not able to share data. $ smbclient -L 192.168.122.1 Enter priyank's password: Domain= OS= Server= Sharename Type Comment --------- ---- ------- shared_priyank Printer ... (3 Replies)
Discussion started by: Priy
3 Replies

4. Red Hat

How to Map AD groups to Samba share?

I am setup a samba share server which is authenticating from Active Directory. I am able to access the share with AD user but not able to access when group defined in "valid users" parameters. below are the steps i performed. In smb.conf workgroup = QASLABS password server =... (3 Replies)
Discussion started by: sunnysthakur
3 Replies

5. Solaris

samba issue: one samba share without password prompting and the others with.

Hi All, I've been trying to configure samba on Solaris 10 to allow me to have one share that is open and writable to all users and have the rest of my shares password protected by a generic account. If I set my security to user, my secured shares work just fine and prompt accordingly, but when... (0 Replies)
Discussion started by: ideal2545
0 Replies

6. UNIX for Advanced & Expert Users

Problems between a HP UX 11.31 Samba share and Windows 7...

Hi I have an issue with a client. He was able to use his mounted Samba share for a long time. However, a couple of days ago, he wasn't able to access all of his files all of a sudden. He still see's the share and majority of the files, but not some that he needs. I checked with Secure CRT on... (1 Reply)
Discussion started by: zixzix01
1 Replies

7. Linux

Samba share script

Hi everyone! I'm trying to run a script when a folder is shared and when it stop being shared. Is there something like .start_share or .stop_share scripts in Samba where I could run some commands?:confused: edit: maybe with a wrapper in smbmount but I share folders via nautilus. Any ideas? (0 Replies)
Discussion started by: funyotros
0 Replies

8. Linux

Facing problem in Samba share

Hi, I am facing problem while accessing samba share on Linux 5.1 from windows, though I have done the same configuration on Linux 4 (Update 2), on Red Hat 4.0 it is working but while on Linux 5.1 these configuration are not working, I have disabled the firewall also. Kindly suggest me... (1 Reply)
Discussion started by: manoj.solaris
1 Replies

9. Solaris

Samba: share subfolder as read only.

Hi, Currently I have a Samba shared configured as follows: comment = Public fileshare path = /u02/pub guest ok = Yes writeable = Yes There is a subfolder under /u02/pub called /u02/pub/expenses/hardware that I need to make read only. How do I do this? I am new to using Samba. ... (2 Replies)
Discussion started by: sparcman
2 Replies

10. UNIX for Dummies Questions & Answers

How can i set up Software disk mirroring(Raid1) in SCO 5.0.5 with two SCSI harddisk ?

thank u very much, (1 Reply)
Discussion started by: coralsea
1 Replies

Featured Tech Videos