Samba share on software raid1


Login or Register to Reply

 
Thread Tools Search this Thread
# 8  
So when you say you "detach" a disk how are you doing that?
# 9  
i just reconfigure a permissions and add a group

Code:
drwxr-xr-x 4 root root 4096 Aug 30 23:12 raid

Code:
drwxr-xr-x   3 root root  4096 Aug 30 12:39 mnt

Code:
drwxrwx--- 2 root admins  4096 Aug 31 08:54 test

smb.conf
Code:
[test]
path = /mnt/raid/test
valid users = @admins
read only = no
browsable = yes
guest ok = no
public= no

when deattach one disk, i cant see test folder in /mnt/raid/

------ Post updated at 03:26 AM ------

Quote:
Originally Posted by hicksd8
So when you say you "detach" a disk how are you doing that?
i turned off from the board, just pull off sata cable.
# 10  
After you created the RAID did you format it/create a new filesystem on it?

Did you see the resilvering process occur?

You are right to assume that you should be able to remove one of the drives and the volume still be available.

Does it also disappear if you detach the other disk?
# 11  
This is what I did
Code:
sudo mkfs.ext4 -F /dev/md0

folder /mnt/raid/test disappear only. But this is only folder that I need.
/mnt/raid is steal present.
# 12  
When you detach a disk, is the RAID still shown as mounted?

You might have /mnt/raid existing on your root filesystem which is covered when you mount /dev/md0 over the top. Then, if the RAID dismounts (although it should'nt) you will be left with /mnt/raid but the test folder will seem to be gone.
# 13  
Quote:
Originally Posted by hicksd8
When you detach a disk, is the RAID still shown as mounted?

You might have /mnt/raid existing on your root filesystem which is covered when you mount /dev/md0 over the top. Then, if the RAID dismounts (although it should'nt) you will be left with /mnt/raid but the test folder will seem to be gone.
yeah raid is present, but inactive, no another disk.
How can i get my windows users allways have their files, and me also.
I cant get to lost my test folder.

I now deattach disk and no folder.
this is lsblk command
Code:
lsblk -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT
NAME                    SIZE FSTYPE            TYPE MOUNTPOINT
sda                   232.9G                   disk
└─sda1                232.9G LVM2_member       part
  ├─johna--vg-root     227G ext4              lvm  /
  └─johna--vg-swap_1   5.9G swap              lvm  [SWAP]
sdb                     1.8T linux_raid_member disk

------ Post updated at 04:25 AM ------

Code:
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : inactive sdb[0](S)
      1953383512 blocks super 1.2

unused devices: <none>

------ Post updated at 04:35 AM ------

Code:
sudo mdadm --examine --scan --config=mdadm.conf >> /etc/mdadm/mdadm.conf

Code:
ARRAY /dev/md/0  metadata=1.2 UUID=bd34d949:34a3999d:949d6038:a871e1c1 name=johna:0


Last edited by tomislav91; 08-31-2018 at 05:23 AM..
# 14  
You posted this in "Unix for Beginners Question and Answers" but this isn't a beginners question so I'll move this thread to the Ubuntu forum proper in the hope that more Ubuntu experts will see it.
This User Gave Thanks to hicksd8 For This Post:
Login or Register to Reply

|
Thread Tools Search this Thread
Search this Thread:
Advanced Search

More UNIX and Linux Forum Topics You Might Find Helpful
Samba share - currently not working
psychocandy
Long running samba share. Never have any problems, Suddenly started asking windows users for password - which doesnt work. Tried to manually reset smb password and manually map - still wrong password. Restart samba?... Red Hat
2
Red Hat
Samba share assess w/no authentication
dignarn
RH 6.4 Samba 3.5.10. Joined a Windows AD (net rpc) I'm trying to create a public read-only share but regardless of the options I've tried users get prompted for a user/password. Can someone tell me whats wrong with my setup? I'm trying to make a whole filesystem that will contain installation...... Red Hat
0
Red Hat
samba issue: one samba share without password prompting and the others with.
ideal2545
Hi All, I've been trying to configure samba on Solaris 10 to allow me to have one share that is open and writable to all users and have the rest of my shares password protected by a generic account. If I set my security to user, my secured shares work just fine and prompt accordingly, but when...... Solaris
0
Solaris
Samba share script
funyotros
Hi everyone! I'm trying to run a script when a folder is shared and when it stop being shared. Is there something like .start_share or .stop_share scripts in Samba where I could run some commands?:confused: edit: maybe with a wrapper in smbmount but I share folders via nautilus. Any ideas?... Linux
0
Linux
How can i set up Software disk mirroring(Raid1) in SCO 5.0.5 with two SCSI harddisk ?
coralsea
thank u very much,... UNIX for Dummies Questions & Answers
1
UNIX for Dummies Questions & Answers