[solved] Routing trouble between multiple networks
Hi everyone,
Hopefully there is someone here that can help me with the problem I got.
At my office I have 1 ubuntu firewall/gateway and several networks.
On the firewall/gateway I have three network cards, one for internet, one for network 192.168.100.0 and one for network 172.20.1.0
We use fwbuilder to make the firewall rules and have there defined the three network cards and the two networks.
The configuration in /etc/network/interfaces looks like this:
If I connect an computer in the 192.168.100.0 network and try nslookup google.com it responds ang give me this information:
Then I connect a computer in the network 172.20.1.0 and does the same task. Here is the output:
If I reorder the /etc/network/interfaces on the firewall/gateway to this:
Then the nslookup works fine for 172.20.1.0 network but not for the 192.168.100.0 network.
IP4 forwarding is enabled on the firewall/gateway.
netstat -anr on firewall/gateway gives this output:
netstat -anr on a computer in 172.20.1.0 network gives this output:
netstat -anr on a computer in 192.168.100.0 network gives this output:
I think that I have included all information needed but if there is other things that's need to be checked let me know.
---------- Post updated at 11:42 PM ---------- Previous update was at 08:47 PM ----------
I'm so embarrassed, just figured out that the problem was NAT.
In fwbuilder I had forgotten to add all networks in the NAT rule, it was only the first network that was added.
Sorry for taking up everyones time about this when the problem was myself. The thread can be closed or deleted. Admin can deside.
Hey there,
I am a network administrator of a student dorm. Me and my team (we do this in our spare time) have the task to upgrade and rebuild our dorm intern network. But unfortunately we don't have that much experience with server setup and ip-routing and stuff. So here is the topic I want to... (8 Replies)
Hi all. Linux noob here.
I was hoping someone could help me with configuring some routing rules on my router, an Asus AC68.
The router is connected to two gateways, wan0_gateway and wan1_gateway.
I have rules set up in the router gui that will push all traffic from every IP other than my own... (0 Replies)
hi guys
This is suse 11 sp1
I have a Server that has 4 NICs, I've created 2 bonds
bond0(eth0-eth1) - 10.10.10.2
bond1(eth2-eth3) - 10.10.10.3
Each bound goes to a Storage Device which is directly connected
so bond0 goes to Storage_Controller_1 and 2 like this
Server_bond0 <-------->... (2 Replies)
If I have 2 interfaces in a server on the same subnet/network does Solaris automatically choose to route packets destined for this network out the first interface. I.e if ce0 and ce1 were on same network ce0 would be chosen as it's first interface? (5 Replies)
Hi
I have 4 NIC's connected to my RHEL 5.3 server. Two on one subnet creating bond0, and two on a second subnet which create bond1. Both bonds are set to use DHCP to obtain IP addresses. Here is the config file for ifcfg-bond0:
DHCP_HOSTNAME=rrnltshckvmx001
DEVICE=bond0
BOOTPROTO=dhcp... (2 Replies)
I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server)
I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more.
route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254
route add net 123.99.67.0 netmask... (2 Replies)