Visit The New, Modern Unix Linux Community

SWSENSOR(4)						   BSD Kernel Interfaces Manual 					       SWSENSOR(4)

swsensor -- software environmental sensor SYNOPSIS
pseudo-device swsensor DESCRIPTION
The swsensor driver provides a software environmental sensor that works with sysctl(8) and envstat(8). The driver is intended to be loaded as a kernel module. One can, however, include the swsensor driver directly in a kernel using the configuration from the synopsis. By default, the sensor is of type ENVSYS_UNITS_INTEGER. The following values can be specified in the modload(8) command when loading the swsensor module to alter the driver's behavior. Variable Usage mode Controls whether or not swsensor provides internally-maintained limits and limit checking Value Meaning 0 sensor has no internally-maintained limits 1 sensor provides its own internal limit value 2 sensor maintains an internal adjustable limit and performs its own comparison between the sensor's limit and its current value limit The initial alarm limit value, if limit emulation is selected (i.e., if mode is set to 1 or 2) value_max value_min The maximum and minimum values. The corresponding ENVSYS_FVALID_MAX and ENVSYS_FVALID_MIN flags are implicitly set. percentage This boolean value controls the setting of the ENVSYS_FPERCENT flag. type Define the sensor's unit/type. By default, a Temperature sensor is created. Any of the string values from the following table can be specified: Temperature Fan Voltage AC Voltage DC Ohms Watts Ampere Watt hour Ampere hour Indicator Integer Drive Battery capacity Battery charge (Values are case-sensitive, and spaces must be included.) value Provide an initial value for the sensor. If this is omitted, the sensor's initial value is set to zero. For example, modload -s type=Voltage DC swsensor will create a sensor of type ENVSYS_UNITS_SVOLTS_DC, while modload -i mode=1 -i limit=50 swsensor will create a sensor which has an initial, device-provided limit of 50. The sensor's raw value and state can be manually updated by modifying the sysctl(8) variables ``hw.swsensor.cur_value'' and ``hw.swsensor.state'' variables respectively. SEE ALSO
modctl(2), envstat(8), sysctl(8) HISTORY
The swsensor driver was written by Paul Goyette and first appeared in NetBSD 6.0. BUGS
The swsensor driver emulates a device with only a single sensor. The swsensor driver can only emulate one hardware-managed limit; this is assumed to be the critical-min limit. BSD
August 27, 2012 BSD

Featured Tech Videos