learp(8)						      System Manager's Manual							  learp(8)

learp - Displays the contents of a LAN-Emulation Address Resolution Protocol (LE-ARP) table SYNOPSIS
/usr/sbin/learp [-u unit_number] -a OPTIONS
Specifies a LE-ARP cache. The unit number is the same as is displayed by the netstat -i command. For example: elan0 is unit 0, elan1 is unit 1, and so on. If the -u option is not specified, the default unit number is 0. Displays all entries in the LAN-Emulation Address Resolution Pro- tocol (LE-ARP) table. DESCRIPTION
Each LAN-Emulation Client interface (displayed as elann in netstat output) has an Address Resolution Protocol (LE-ARP) table that contains mappings of 6-byte medium access control (MAC) addresses to 20-byte Asynchronous Transfer Mode (ATM) addresses. The learp command displays the contents of the LE-ARP table. Each LE-ARP table entry contains the following information: Each MAC address that has been or is being contacted through the ATM-emulated LAN. One of the following state values: AP -- LE-ARP is pending. The ATM address associated with the MAC address is not known. DE -- Delete of the LE-ARP cache entry is pending. When there are no more VCs for a LE-ARP entry, it is marked for deletion. After there is no activity for 5 minutes (age periond), the entry is removed for the cache. FD -- Forward Direct. Packets flowing to the destination are using the data-direct VC. FL -- Flush is pending. A new VC has been established with the remote node and the broadcast channel is being flushed so packets flowing on the new VC will not arrive out of order. VP -- Virtual Channel (VC) setup is pending. The ATM address is known, but no VC is established with the remote node. If known, the 20-byte ATM address associated with the MAC address. One of the fol- lowing flags: R -- Remote entry. The MAC address is on a legacy (that is, Ethernet) network on the back side of an ATM edge device. P -- Permanent entry. The LE-ARP entry is permanent. If known, this is the Virtual Path Identifier (VPI) and the Virtual Channel Identifier (VCI) of the data-direct VC used by packets destined to the MAC address. Many MAC addresses may use the same VC. EXAMPLES
The following example shows the output of a learp -a command in which the LE-ARP cache contains five entries: # learp -a le-arp cache con- tains 5 entries. MAC Address State ATM Address Flags VPI/VCI 08-00-2b-01-01-01 (AP) pending 08-00-2b-01-01-02 (VP) 39000000000000000000000000.08002b010102.00 pending 08-00-2b-01-02-02 (FL) 39000000000000000000000000.08002b010203.00 R 0/65 08-00-2b-01-02-03 (FD) 39000000000000000000000000.08002b010203.00 0/65 SEE ALSO
Commands: atmconfig(8), atmelan(8), atmsig(8) learp(8)

Featured Tech Videos