dell

fence_drac(8)						      System Manager's Manual						     fence_drac(8)

NAME

       fence_drac - fencing agent for Dell Remote Access Card

SYNOPSIS

       fence_drac [OPTION]...

DESCRIPTION

       fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC).  This card provides remote access to control-
       ling power to a server.	It logs into the DRAC through the telnet interface of the card.  By default, the telnet interface is not  enabled.
       To  enable  the	interface,  you  will need to use the racadm command in the racser-devel rpm available from Dell.  To enable telnet on the
       DRAC:

       [root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1

       [root]# racadm racreset

       fence_drac accepts options on the command line as well as from stdin.  Fenced sends parameters through  stdin  when  it	execs  the  agent.
       fence_drac can be run by itself with command line options.  This is useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.dell.com

OPTIONS

       -a IPaddress
	      IP address or hostname of the switch.

       -c cmd_prompt
	      Force fence_drac to use cmd_prompt as the command prompt

       -d dracversion
	      Force fence_drac to treat the device as though it was for the specified drac version

       -D dumpfile
	      Debug file of the telnet interaction

       -h     Print out a help message describing available options, then exit.

       -l login
	      Login name.

       -m modulename
	      The module name of the blade when using DRAC/MC firmware.

       -o action
	      The action required.  reboot (default), off, on or status.

       -p password
	      Password for login.

       -S path
	      Full path to an executable to generate the password for login.

       -f seconds
	      Wait X seconds before fencing is started

       -V     Print out a version message, then exit.

STDIN PARAMETERS

       action = < param >
	      The action required.  reboot (default), off, on or status.

       agent = < param >
	      This option is used by fence_node(8) and is ignored by fence_apc.

       cmd_prompt = < param >
	      Force fence_drac to use cmd_prompt as the command prompt

       drac_version = < param >
	      Force fence_drac to treat the device as though it was for the specified drac version.

       debug = < dumpfile >
	      Debug file of the telnet interaction

       ipaddr = < hostname | ip >
	      IP address or hostname of the switch.

       login = < param >
	      Login name.

       modulename = < param >
	      The module name of the blade when using DRAC/MC firmware.

       passwd = < param >
	      Password for login.

       passwd_script = < param >
	      Full path to an executable to generate the password for login.

       delay = < param >
	      Wait X seconds before fencing is started

       SEE ALSO
	      fence(8), fence_node(8)

																     fence_drac(8)