powernet(8) Network UPS Tools (NUT) powernet(8)
NAME
powernet - Driver for APC SNMP UPS equiment
NOTE
This man page only documents the hardware-specific features of the powernet driver. For information about the core driver, see nutups-
drv(8).
SUPPORTED HARDWARE
APC AP9606 APC Web/SNMP management card, perhaps others
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
community=value
SNMP community to use (default = public)
sdtype=value
Shutdown type to use - possible values:
0 = Soft shutdown or powerdown, depending on line status (default)
1 = Soft shutdown followed by powerdown
2 = Instant shutdown
3 = Shutdown with grace period
REQUIREMENTS
You will need to install the Net-SNMP package from http://www.net-snmp.org/ before building this driver.
INSTALLATION
This driver is not built by default. You can build it by using "configure --with-drivers=powernet" before calling make.
IMPLEMENTATION
The hostname of the UPS is specified with the "port" value in ups.conf, i.e.:
[ap9606]
driver = powernet
port = apc-snmp-ups.example.com
community = writable
AUTHORS
Dmitry Frolov (powernet)
Hans Ekkehard Plesser (snmp-ups)
Arnaud Quette (snmp-ups)
SEE ALSO
APC's PowerNet MIB v3.3.0
Available online at http://apcc.com/tools/download/
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/
NUT mailing list archives and information: http://lists.exploits.org/
Tue Oct 22 2002 powernet(8)