Resize LUNs and zfs-pool on sun cluster

10 More Discussions You Might Find Interesting

1. Solaris

Need to remove a disk from zfs pool

I accidently added a disk in different zpool instead of pool, where I want. root@prtdrd21:/# zpool status cvfdb2_app_pool pool: cvfdb2_app_pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM cvfdb2_app_pool ONLINE 0 0 0...

2. Solaris

reassign zfs pool lun

I have a branded zone txdjintra that utilizes a pool named Pool_djintra that is no longer required. There is a 150 Gig Lun assigned to the pool that I need to reassign to another branded zone txpsrsrv07 with a pool named Pool_txpsrsrv07 on the same sun blade. What is the process to do this? ...

3. Solaris

ZFS - Dataset / pool name are the same...cannot destroy

I messed up my pool by doing zfs send...recive So I got the following : zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 928G 17.3G 911G 1% 1.00x ONLINE - tank1 928G 35.8G 892G 3% 1.00x ONLINE - So I have "tank1" pool. zfs get all...

4. Solaris

ZFS - overfilled pool

installed Solaris 11 Express on my server machine a while ago. I created a Z2 RAID over five HDDs and created a few ZFS filesystems on it. Once I (unintentionally) managed to fill the pool completely with data and (to my surprise) the filesystems stopped working - I could not read/delete any...

5. Solaris

Best way to rename a ZFS Pool?

Other than export/import, is there a cleaner way to rename a pool without unmounting de FS? Something like, say "zpool rename a b"? Thanks.

6. Solaris

Installing Sun Cluster on ZFS root pools

Hi All! I have been tasked with creating a clustered file system for two systems running Sol 10 u8. These systems have 3 zones each and the global zone has ZFS on the boot disk. We currently have one system sharing an NFS mount to both of these systems. The root zfs pool status (on the...

7. Solaris

zfs pool migration

I need to migrate an existing raidz pool to a new raidz pool with larger disks. I need the mount points and attributes to migrate as well. What is the best procedure to accomplish this. The current pool is 6x36GB disks 202GB capacity and I am migrating to 5x 72GB disks 340GB capacity.

8. Solaris

ZFS pool question

I created a pool the other day. I created a 10 gig files just for a test, then deleted it. I proceeded to create a few files systems. But for some reason the pool shows 10% full, but the files systems are both at 1%? Both files systems share the same pool. When I ls -al the pool I just...

9. Infrastructure Monitoring

zfs - migrate from pool to pool

Here are the details. cnjr-opennms>root$ zfs list NAME USED AVAIL REFER MOUNTPOINT openpool 20.6G 46.3G 35.5K /openpool openpool/ROOT 15.4G 46.3G 18K legacy openpool/ROOT/rds 15.4G 46.3G 15.3G / openpool/ROOT/rds/var 102M ...

10. Solaris

ZFS Pool Mix-up

Hi all I plan to install Solaris 10U6 on some SPARC server using ZFS as root pool, whereas I would like to keep the current setup done by VxVM: - 2 internal disks: c0t0d0 and c0t1d0 - bootable root-volume (mirrored, both disks) - 1 non-mirrored swap slice - 1 non-mirrored slices for Live...

LEARN ABOUT OPENSOLARIS

zdb

zdb(1M) 						  System Administration Commands						   zdb(1M)

NAME

       zdb - ZFS debugger

SYNOPSIS

       zdb pool

DESCRIPTION

       The  zdb command is used by support engineers to diagnose failures and gather statistics. Since the ZFS file system is always consistent on
       disk and is self-repairing, zdb should only be run under the direction by a support engineer.

       If no arguments are specified, zdb, performs basic consistency checks on  the  pool  and  associated  datasets,	and  report  any  problems
       detected.

       Any options supported by this command are internal to Sun and subject to change at any time.

EXIT STATUS

       The following exit values are returned:

       0    The pool is consistent.

       1    An error was detected.

       2    Invalid command line options were specified.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWzfsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Unstable			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       zfs(1M), zpool(1M), attributes(5)

SunOS 5.11							    31 Oct 2005 							   zdb(1M)

Solaris