Can't see Netapp LUN on Solaris using LPFC after reboot.

9 More Discussions You Might Find Interesting

1. Linux

Identify newly attached LUN from NetApp

Hi I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o GNU/Linux I have first run the df -h and got the following: df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_outsystemdb-lv_root 50G 2.7G 45G ...

2. Solaris

How to mount a NetApp snapshoot to a Solaris server?

Hi I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that...

3. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the...

4. AIX

Netapp iscsi lun

Hi, I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name. Please share me the steps to complete this requirements. Thanks in advance.

5. UNIX for Advanced & Expert Users

Removing EMC LUN from Solaris 10 host without a reboot

I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help. Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns....

6. Solaris

Solaris 10 / NetApp volumes - Forbidden: You don't have permission to access...

Hi all We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5 There is a symlink in /app/xxx/jboss-3.2.5 which points to...

7. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need...

8. Solaris

Netapp filer LUN Resize. Commands to run on Solaris afterwards.

Hi, I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to...

9. Solaris

Use DFM Netapp 3.01 R1 on Solaris 8

I have this problem when i integrate a new san switch in DFM 3.01 R1 : dfm fcswitch add switchname1 Error: Host switchname2 (11197) already exists. switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database. Bests Regards Olivier

LEARN ABOUT MINIX

reboot

REBOOT(8)						      System Manager's Manual							 REBOOT(8)

NAME

       reboot - reboot the system immediately

SYNOPSIS

       reboot [-f]

DESCRIPTION

       Reboot  can  be	used  to  reboot  the  system  after  installing a new kernel.	It does not inform the users, but does log it's actions in
       /usr/adm/wtmp and /usr/adm/authlog.  The system is then rebooted with the reboot(2) systemcall.

       If the -f flag is not given then all processes are sent terminate signals to give them a chance to die peacefully before the reboot() call.

       If the wtmp file exists, reboot logs itself as if it were a shutdown.  This is done to prevent last(1) from talking  about  system-crashes.
       Reboot is registered as is in the authlog file.

       Reboot can only be executed by the super-user.  Any other caller will be refused, either by reboot(8) or by reboot(2).

SEE ALSO

       reboot(2), shutdown(8), halt(8), boot(8).

BUGS

       The  error message's given by reboot are not always useful.  There are several routines that can fail, but which are not fatal for the pro-
       gram.

AUTHOR

       Edvard Tuinder (v892231@si.hhs.NL)

																	 REBOOT(8)

Solaris