You'd normally run the flarcreate over the mounted filesystems, rather than the underlying devices
eg something like:
I've not had to do a flar restore but you can instruct JET (sun jumpstart framework) to use a flar by setting the base_config_products to "flash sds" (and provide the same SDS settings you used for the first jumpstart) and flash_archive_locations to an NFS url for your flar.
If you still want to take a backup of the data via the devices, you can either provide one of the two mirrors or the mirror metadevice itself, either will work just fine. When you do the restore, you can just restore it onto the main mirror metadevice, or if that's not created yet, the real disk device then mirror it up again. SDS is quite flexible like that
Sing out if you need a hand with the process of breaking off a submirror or remirroring after the restore without interrupting service etc.
Hello,
I am trying to setup a storage server with salvaged equipments:
QSSC-S4R server, with QLogic 2562 FC HBA's
Clariion KTN-STL4 4GB FC Enclosures
Disks Salvaged from EMC Vmax
Disks are 520B sector size so i converted to 512B in linux environment and create multipath successfully. But... (4 Replies)
Hey guys,
Not sure if this is the best place for this question, but, after using Fedora now for about a year, I'm still getting used to it but I'm using it practically all the time now and instead of having a dual boot with Windows 7, I want to create an image of my Windows 7 installation,... (3 Replies)
I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0)
windows server 2003 was installed on that disk.
I will add a disk.(scsi 300GB)
I will install Linux on that additional disk.
I want to create multiple-boot system.
Is it possible?
I wanna know how to create... (0 Replies)
We use SW mirroring (RAID1) using SVM for our SUN servers (which we OEM to end clients with our application on). When I need to make a tape backup for the server (disk), I disable mirroring and perform backup of the entire disk to tape using ufsdump. This process requires an outage and sensitive as... (8 Replies)
What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example:
machine# mkfs -F ufs /dev/md/dsk/d40
size not specified
ufs usage: mkfs special size(sectors) \
-m : dump fs cmd line used to make this partition
-V : print this... (4 Replies)
I have AIX 5.1
I ran these commands and was not able to see what disk were mirrored to what. I thought this is what I should do?
lslv -m rd |more
lslv -m db |more
I get a error stating that it can't find or in the device configuation databse.
Is there another way to look? I have a physcal... (1 Reply)