Need help configuring Cable Modem on Solaris x86

10 More Discussions You Might Find Interesting

1. OS X (Apple)

Cannot access UNIX.com with new cable modem

Hi. I have a very strange problem, so strange I don't even know which sub-forum to post it to. Last week, my cable modem broke, so I took it back and got a new one. The new one doesn't work with my old router so, for now, I have to connect the modem directly to my Mac with an ethernet...

2. Solaris

modem setup solaris 10 x86

I,am trying to configure an external multitech 5656zdx modem for dial in mode on a serial port using a dell 1800 server with solaris 10 for intel as the OS. It answers only once, further attemps fail, I have to reboot system before it will work again. I also used an older model 3334zdx which...

3. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks

4. BSD

cable modem problem

hi I want to setup my cable modem under OpenBSD. I did not configure my network while installing the system. When I type, I get # ifconfig -a lo0 : .... ... ... rl0 : .... ... ... vr0 : ... ... ... I have two network cards (the machine will be a router). I created...

5. UNIX for Dummies Questions & Answers

cable modem to sparc

hi , i have sparc machine , i want to connect my le0 (ethernet interface) directly to cable modem , i have created a file resolv.conf,hosts, dhcp.le0,defaultrouter,nisswitch,hostname.le0. i dont know my cable companies <domain name> and <name server assigned to me> , also they even dont know how...

6. IP Networking

DHCP Linux and cable modem

I can do all this in windows, but Im trying to run the SuSe 8.0 professional as a gateway. I have the local (private) LAN setup with no problems, but Im having troubles getting it to use DHCP to go out on the external card to the service provider, which only uses Dynamic IP's. WHere, what and how...

7. UNIX for Dummies Questions & Answers

Is anyone using unix with cable modem

Is anyone using a cable modem with unix and if so does your cable co. support unix or did you get that going on your own and how. Thank you for all your help.

8. UNIX for Dummies Questions & Answers

can't get my cable modem up

Caldera eDesktop 2.4 - Cable Modem my NIC card has been detected, but funny scenario: #dmesg eth0: RealTek rtl8139 Fast Ethernet at 0x2400, IRQ 0, 00:50:ba:43:a0:ef /*I noticed that it detected the correct module (rtl8139) but I'm using D-Link and not RealTek, which uses the same module....

9. UNIX for Dummies Questions & Answers

Linux and my cable modem

I recently installed Caldera 2.4 (successfully:p ), but I cannot seem to get my cable modem up and running! My ISP is AT&T and I'm using @home. I've tried using DHCP and that didn't work either. I briefly read the cable modem HOWTO, but the lsmod didn't list my network card (3COM). What do I do now?

10. IP Networking

unix and the cable modem

If the cable modem that the cable company is using doesn't support unix is there a way around that . Are there drivers I can get online or is there a way to configure redhat lenix (that's what I will be using) to work with the cable modem. Or is there a way to buy a third party cable modem that...

LEARN ABOUT OSX

ibtl

ibtl(7D)							      Devices								  ibtl(7D)

NAME

       ibtl - Solaris InfiniBand Transport Layer

DESCRIPTION

       InfiniBand (IB) is an I/O technology based on switched fabrics. The Solaris InfiniBand Transport Layer (IBTL) is a Solaris kernel misc mod-
       ule and adheres to the IB Architecture Version 1.1 specification and provides a transport layer abstraction to IB client drivers.

       IBTL implements the programming interfaces for the Solaris InfiniBand Transport Framework (IBTF), consisting of the  IB	Channel  Interface
       (CI) and the IB Transport Interface (TI).

       The  CI	consists  of  Host  Channel Adapters (HCAs) and HCA drivers. A host is attached to the IB fabric through the CI layer. The Solaris
       InfiniBand CI is Sun's API rendering of the InfiniBand Architecture (IBTA) "verbs" specification.

       The Solaris InfiniBand TI is the kernel service driver interface into the Solaris InfiniBand Transport Framework. It provides transport and
       communications setup programming interfaces for Unreliable Datagram (UD) and Reliable Connected (RC) transport types only.

FILES

       /kernel/misc/ibtl

	   32-bit x86 ELF kernel misc module

       /kernel/misc/amd64/ibtl

	   64-bit x86 ELF kernel misc module

       /kernel/misc/sparcv9/ibtl

	   64-bit SPARC ELF kernel module

ATTRIBUTES

       See attributes(5) for a description of the following attribute:

       +-----------------------------+-----------------------------+
       |ATTRIBUTE TYPE		     |ATTRIBUTE VALUE		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Consolidation Private	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWhea, SUNWib		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       attributes(5), ib(7D), ibcm(7D), ibdm(7D)

       InfiniBand Architecture Specification, Volume 1: Release 1.1

SunOS 5.10							    9 Oct 2004								  ibtl(7D)

Solaris