ethernet problem
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0103c3391,0:a File and args:
SunOS Release 5.8 Version Generic_108528-29 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
ifconfig: plumb: qfe2: Bad file number
configuring IPv4 interfaces: eri0.
moving addresses from failed IPv4 interfaces: qfe2 (couldn't move, no alternative interface).
Hostname: cinta1
metainit: cinta1: there are no existing databases
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t1d0s5: is clean.
/dev/rdsk/c1t1d0s4: is clean.
Starting process accounting
starting rpc services: rpcbind done.
Setting default IPv4 interface for multicast: add net 224.0/4: gateway cinta1
syslog service starting.
Print services started.
/usr/lib/power/powerd: shmget: Invalid argument
volume management starting.
Starting accounting daemon.
Checking that daemon is not already running ........... [ OK ]
Launching modules ..................................... [ OK ]
Status :
Daemon ............................................. [ running ]
Accounting Daemon is started.
339 /opt/CINTA/sbin/integrit -c -d
XASNAV (navSecCINTA7) launching ..................... Failed to initialize LOG API.
[ KO ]
XDR2XAS (xdrSecCINTA1) launching ...................... Failed to initialize LOG API.
[ OK ]
The system is ready
root@cinta1/[286]> prtconf -D | grep network
network, instance #0 (driver name: eri)
root@cinta1/etc[291]> grep network /etc/path_to_inst
"/pci@8,700000/network@5,1" 0 "eri"
root@cinta1/etc[294]> grep network path_*
path_to_inst:"/pci@8,700000/network@5,1" 0 "eri"
path_to_inst.bak:"/pci@8,700000/network@5,1" 0 "eri"
path_to_inst.bak:"/pci@8,700000/pci@2/pci@0/network@0" 4 "ce"
path_to_inst..bak:"/pci@8,700000/pci@2/pci@0/network@1" 5 "ce"
path_to_inst.bak:"/pci@8,700000/pci@2/pci@4/network@2" 6 "ce"
path_to_inst.bak:"/pci@8,700000/pci@2/pci@4/network@3" 7 "ce"
path_to_inst.bak:"/pci@8,600000/pci@1/pci@0/network@0" 0 "ce"
path_to_inst.bak:"/pci@8,600000/pci@1/pci@0/network@1" 1 "ce"
path_to_inst.bak:"/pci@8,600000/pci@1/pci@4/network@2" 2 "ce"
path_to_inst.bak:"/pci@8,600000/pci@1/pci@4/network@3" 3 "ce"
path_to_inst.old:"/pci@8,700000/network@5,1" 0 "eri"
path_to_inst.old_YP:"/pci@8,700000/network@5,1" 0 "eri"
path_to_inst.ori:"/pci@8,700000/network@5,1" 0 "eri"
path_to_inst.ori:"/pci@8,700000/pci@2/pci@0/network@0" 4 "ce"
path_to_inst.ori:"/pci@8,700000/pci@2/pci@0/network@1" 5 "ce"
path_to_inst.ori:"/pci@8,700000/pci@2/pci@4/network@2" 6 "ce"
path_to_inst.ori:"/pci@8,700000/pci@2/pci@4/network@3" 7 "ce"
path_to_inst.ori:"/pci@8,600000/pci@1/pci@0/network@0" 0 "ce"
path_to_inst.ori:"/pci@8,600000/pci@1/pci@0/network@1" 1 "ce"
path_to_inst.ori:"/pci@8,600000/pci@1/pci@4/network@2" 2 "ce"
path_to_inst.ori:"/pci@8,600000/pci@1/pci@4/network@3" 3 "ce"
path_to_inst_YP:"/pci@8,700000/network@5,1" 0 "eri"
root@cinta1/dev[299]> ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.10.101 netmask ffffff00 broadcast 192.168.10.255
ether 0:3:ba:33:ae:8a
root@cinta1/etc[302]> cat hostname.ce1_YP
cinta1
root@cinta1/etc[303]> cat hostname.qfe2
cinta1
there is no network interface unless "eri" on path_to_inst
but there is network interface ce on path_to_inst ori and path_to_inst.bak
my question :
1. can i copy it to recent path_to_inst ???
2. can i set hostname.[interface network] to hostname.ce[xxx] ?
