10 More Discussions You Might Find Interesting
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
I have a Sun-Fire V440 running with Solaris 9 and am trying to get a WD USB Hard Drive mounted. None of the articles I've read so far have helped.
Output from rmformat:
Looking for devices...
1. Volmgt Node: /vol/dev/aliases/rmdisk0
Logical Node: /dev/rdsk/c5t0d0s2
... (17 Replies)
Discussion started by: oldtimertj
3. UNIX for Advanced & Expert Users
I hope I'm writing to the correct category for my question.
I have a very basic shell script for doing file archiving to the external usb hard drive (WD studio edition II 2TB formatted as FAT32 for compatibility). The shell script only needs to run once per day. It basically... (8 Replies)
Discussion started by: johankor
Does anyone know if it's possible to upgrade a Sun Fire v65x to support USB external hard drive(s)? My take on this is the USB ports were designed to support keyboard and mouse funtionality. BIOS Version/Date is: Intel Corporation SWV25.86B.1191.P08.0310291543, 10/29/2003.
Does anyone... (3 Replies)
Discussion started by: mattdon
Hey i have a new USB 320GB harddrive i want to use in my Solaris 10 enviroment.
i first had the drive format in windows with FAT32,
Solaris was able to auto mount this drive and everything was fine, until i realised that it would not except files greater then 4gb, due to the limitations of... (6 Replies)
Discussion started by: dshakey
I am having trouble to login to rsc or serial console of V890.
The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting... (8 Replies)
Discussion started by: defflepord
I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform.
I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Discussion started by: agfa_109
8. Filesystems, Disks and Memory
I have an external USB Hard Disk Drive on which I have 3 partitions and it works fine under Windows XP but when I am using Red Hat Linux 5 I don't see any icon for this USB HDD. Also I am not able to browse my USB Pen Drive. However, I can use it under Mandrake Linux without any... (4 Replies)
Discussion started by: indiansoil
I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone... (1 Reply)
Discussion started by: garycrow
What is the comand to mount and usb hard disk ?
I have Solaris 10 installed!
10nx! (1 Reply)
Discussion started by: daniel.balasa