Problem with accessing SAN disks


 
Thread Tools Search this Thread
Operating Systems Solaris Problem with accessing SAN disks
# 1  
Old 05-21-2008
specified shared raw partition may not have correct permission

Hi, I'm having a problem when attempting to define the OCR location for my 10g RAC setup on Solaris 10. I get the following error:

The specified shared raw partition /dev/did/rdsk/d1s0 may not have the correct permission. Verify that the partition is owned by Oracle user.

As per the Oracle10g installation guide, I did the following:

# chown root:dba /devices/pseudo/did@1:1,1s0,raw
# chmod 640 /devices/pseudo/did@1:1,1s0,raw
# ls -l /devices/pseudo/did@1:1,1s0,raw
crw-r----- 1 root dba 239, 32 May 20 12:37 /devices/pseudo/did@1:1,1s0,raw

After I have the above, the installer still complains of the same error.

Cheers.
# 2  
Old 05-21-2008
I found the following entries in the system console log:

May 21 15:34:57 wrkarea1 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/SUNW,qlc@1
/fp@0,0/ssd@w256000c0ffd98fe5,7 (ssd4):
May 21 15:34:57 wrkarea1 Corrupt label; wrong magic number
May 21 15:34:57 wrkarea1 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/SUNW,qlc@1
/fp@0,0/ssd@w256000c0ffd98fe5,0 (ssd7):
May 21 15:34:57 wrkarea1 Corrupt label; wrong magic number
May 21 15:34:57 wrkarea1 scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/SUNW,qlc@1
/fp@0,0/ssd@w256000c0ffd98fe5,0 (ssd7):
May 21 15:34:57 wrkarea1 Corrupt label; wrong magic number
May 21 15:34:58 wrkarea1 scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/SUNW,qlc@2
/fp@0,0/ssd@w266000c0ffe98fe5,7 (ssd22):
May 21 15:34:58 wrkarea1 Corrupt label; wrong magic number
May 21 15:34:58 wrkarea1 scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/SUNW,qlc@2
/fp@0,0/ssd@w266000c0ffe98fe5,7 (ssd22):
May 21 15:34:58 wrkarea1 Corrupt label; wrong magic number
May 21 15:34:58 wrkarea1 scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/SUNW,qlc@2
/fp@0,0/ssd@w266000c0ffe98fe5,0 (ssd29):
May 21 15:34:58 wrkarea1 Corrupt label; wrong magic number

I have tried to run format to label the disks above but I can't find any of the above disks:

# format
Searching for disks...done

c0t256000C0FFD98FE5d0: configured with capacity of 10.25GB
c0t256000C0FFD98FE5d7: configured with capacity of 5.61GB


AVAILABLE DISK SELECTIONS:
0. c0t216000C0FF898FE5d0 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,0
1. c0t216000C0FF898FE5d1 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,1
2. c0t216000C0FF898FE5d2 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,2
3. c0t216000C0FF898FE5d3 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,3
4. c0t216000C0FF898FE5d4 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,4
5. c0t216000C0FF898FE5d5 <SUN-StorEdge3510-413C cyl 1498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,5
6. c0t216000C0FF898FE5d6 <SUN-StorEdge3510-413C cyl 9998 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,6
7. c0t216000C0FF898FE5d7 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,7
8. c0t216000C0FF898FE5d8 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,8
9. c0t216000C0FF898FE5d9 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,9
10. c0t216000C0FF898FE5d10 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,a
11. c0t216000C0FF898FE5d11 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,b
12. c0t216000C0FF898FE5d12 <SUN-StorEdge3510-413C cyl 1498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,c
13. c0t216000C0FF898FE5d13 <SUN-StorEdge3510-413C cyl 9998 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff898fe5,d
14. c0t256000C0FFD98FE5d0 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,0
15. c0t256000C0FFD98FE5d1 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,1
16. c0t256000C0FFD98FE5d2 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,2
17. c0t256000C0FFD98FE5d3 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,3
18. c0t256000C0FFD98FE5d4 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,4
19. c0t256000C0FFD98FE5d5 <SUN-StorEdge3510-413C cyl 1498 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,5
20. c0t256000C0FFD98FE5d6 <SUN-StorEdge3510-413C cyl 9998 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,6
21. c0t256000C0FFD98FE5d7 <SUN-StorEdge3510-413C cyl 5749 alt 2 hd 64 sec 32>
/pci@1c,600000/SUNW,qlc@1/fp@0,0/ssd@w256000c0ffd98fe5,7
22. c1t226000C0FFB98FE5d0 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,0
23. c1t226000C0FFB98FE5d1 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,1
24. c1t226000C0FFB98FE5d2 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,2
25. c1t226000C0FFB98FE5d3 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,3
26. c1t226000C0FFB98FE5d4 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,4
27. c1t226000C0FFB98FE5d5 <SUN-StorEdge3510-413C cyl 1498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,5
28. c1t226000C0FFB98FE5d6 <SUN-StorEdge3510-413C cyl 9998 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,6
29. c1t226000C0FFB98FE5d7 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,7
30. c1t226000C0FFB98FE5d8 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,8
31. c1t226000C0FFB98FE5d9 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,9
32. c1t226000C0FFB98FE5d10 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,a
33. c1t226000C0FFB98FE5d11 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,b
34. c1t226000C0FFB98FE5d12 <SUN-StorEdge3510-413C cyl 1498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,c
35. c1t226000C0FFB98FE5d13 <SUN-StorEdge3510-413C cyl 9998 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w226000c0ffb98fe5,d
36. c1t266000C0FFE98FE5d0 <drive type unknown>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,0
37. c1t266000C0FFE98FE5d1 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,1
38. c1t266000C0FFE98FE5d2 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,2
39. c1t266000C0FFE98FE5d3 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,3
40. c1t266000C0FFE98FE5d4 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,4
41. c1t266000C0FFE98FE5d5 <SUN-StorEdge3510-413C cyl 1498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,5
42. c1t266000C0FFE98FE5d6 <SUN-StorEdge3510-413C cyl 9998 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,6
43. c1t266000C0FFE98FE5d7 <drive type unknown>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,7
44. c3t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@0,0
45. c3t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@2,0
46. c3t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@3,0
Specify disk (enter its number):
# 3  
Old 05-21-2008
I ran luxadm -e port and noticed that the disks that are having the error shows not connected:

# luxadm -e port
/devices/pci@1c,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1c,600000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@1d,700000/SUNW,qlc@2,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@1d,700000/SUNW,qlc@2/fp@0,0:devctl CONNECTED

How do I connect these disks?
# 4  
Old 05-21-2008
The drives do show up in your format output:
Code:
36. c1t266000C0FFE98FE5d0 <drive type unknown>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,0
37. c1t266000C0FFE98FE5d1 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,1
38. c1t266000C0FFE98FE5d2 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,2
39. c1t266000C0FFE98FE5d3 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,3
40. c1t266000C0FFE98FE5d4 <SUN-StorEdge3510-413C cyl 10498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,4
41. c1t266000C0FFE98FE5d5 <SUN-StorEdge3510-413C cyl 1498 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,5
42. c1t266000C0FFE98FE5d6 <SUN-StorEdge3510-413C cyl 9998 alt 2 hd 64 sec 32>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,6
43. c1t266000C0FFE98FE5d7 <drive type unknown>
/pci@1d,700000/SUNW,qlc@2/fp@0,0/ssd@w266000c0ffe98fe5,7

Tornado
# 5  
Old 05-22-2008
Quote:
Originally Posted by michael.chow
I ran luxadm -e port and noticed that the disks that are having the error shows not connected:

# luxadm -e port
/devices/pci@1c,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1c,600000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@1d,700000/SUNW,qlc@2,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@1d,700000/SUNW,qlc@2/fp@0,0:devctl CONNECTED

How do I connect these disks?
Check your fibre connection with:
Code:
/usr/sbin/cfgadm -al

If a controller is not seen, or seen as unconfigured run:
Code:
/usr/sbin/cfgadm -c configure c?

Tornado
# 6  
Old 05-22-2008
Problem with accessing SAN disks

I have a StorEdge 3510 and am running Solaris 10. When I tried to dd a disk to use as my Oracle OCR and Voting disk I get an error saying corrupt label - wrong magic number. So I did some extra checks and found the following:

Code:
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@2/fp@0,0:devctl                    CONNECTED
/devices/pci@1c,600000/SUNW,qlc@1/fp@0,0:devctl                    CONNECTED
/devices/pci@1c,600000/SUNW,qlc@1,1/fp@0,0:devctl                  NOT CONNECTED
/devices/pci@1d,700000/SUNW,qlc@2,1/fp@0,0:devctl                  NOT CONNECTED
# cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             fc-fabric    connected    configured   unknown
c0::210000e08b8683cc           unknown      connected    unconfigured unknown
c0::216000c0ff898fe5           disk         connected    configured   unknown
c0::256000c0ffd98fe5           disk         connected    configured   unknown
c1                             fc-fabric    connected    configured   unknown
c1::210000e08b8656ca           unknown      connected    unconfigured unknown
c1::226000c0ffb98fe5           disk         connected    configured   unknown
c1::266000c0ffe98fe5           disk         connected    configured   unknown
c2                             scsi-bus     connected    configured   unknown
c2::dsk/c2t0d0                 CD-ROM       connected    configured   unknown
c3                             scsi-bus     connected    configured   unknown
c3::dsk/c3t0d0                 disk         connected    configured   unknown
c3::dsk/c3t2d0                 disk         connected    configured   unknown
c3::dsk/c3t3d0                 disk         connected    configured   unknown
c4                             fc           connected    unconfigured unknown
c5                             fc           connected    unconfigured unknown
c6                             scsi-bus     connected    unconfigured unknown
usb0/1                         usb-kbd      connected    configured   ok
usb0/2                         usb-mouse    connected    configured   ok
usb1/1                         unknown      empty        unconfigured ok
usb1/2                         unknown      empty        unconfigured ok

I then did these steps:

Code:
# cfgadm -c configure c4
# cfgadm -c configure c5
# cfgadm -c configure c6
# reboot -- -r

But after the server rebooted, running luxadm -e port and cfgadm -al still gave me the same results. How to I make the disks show as configured in cfgadm and connected in luxadm -e port? I have already checked and verified that the physical connections are in place.

Last edited by DukeNuke2; 05-22-2008 at 05:29 AM.. Reason: please set code in tags for better reading!
# 7  
Old 05-22-2008
Starting multiple threads about the same problem isn't going to speed up your resolution.

Have a look at Info Doc 89031 on sunsolve to help you trouble shoot your problem.
Tornado
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Sense key unit attention & iostat hardware and transport errors on SAN disks

Hello, I'm trying to get to the bottom of SAN disk errors we've been seeing. Server is Sun Fire X4270 M2 running Solaris 10 8/11 u10 X86 since April 2012. SAN HBAs are SG-PCIE2FC-QF8-Z-Sun-branded Qlogic. SAN storage system is Hitachi VSP. We have 32 LUNs in use and another 8 LUNs not brought... (4 Replies)
Discussion started by: TKD
4 Replies

2. AIX

Issue with increasing size of SAN disks on AIX

HI, I have had an issue last night while trying to extend a filesystsem . chvg -g <vg> command cameback with an error 0516-1790 chvg: Failed bootinfo -s hdisk9. Ensure the physical volume is available and try again. 0516-732 chvg: Unable to change volume group u01vg. the VG has 1... (1 Reply)
Discussion started by: xmen01
1 Replies

3. Red Hat

Identify SAN disks not in use

Hello, How can I identify SAN disks not in use by the OS? Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies

4. UNIX for Dummies Questions & Answers

Identify SAN disks

Hello everybody, I'm using the binary inqraid (Linux RHEL) in order to retrieve information about SAN disks. The questions are: Given an LDEV, how do I know if the SAN disk related to this LDEV is being used by the OS? I mean, how can I demonstrate to "Storage department" that all disks of... (4 Replies)
Discussion started by: asanchez
4 Replies

5. Filesystems, Disks and Memory

Help with finding WWN of SAN disks

Hi, I'm new to SAN storage so I was wondering if someone can assist me with a problem. I have a solaris 10 OS with 3 SAN devices attached. We are trying to troubleshoot performance so I was asked to get the WWN of each SAN disk and show what it's attached to via the SVM mount in the metastat... (1 Reply)
Discussion started by: rkruck
1 Replies

6. Solaris

SAN DISKS - Number of slices ?

Good morning to one and all :-) Thank god its Friday, as its bee na rubbish week for me ! So, a quick question. Disks ! Ive got a few local disks, and a few SAN disks used on my solaris server. Whats confusing me, and Im not sure if there's an issue at the SAN end, or my end, regarding the... (3 Replies)
Discussion started by: sbk1972
3 Replies

7. AIX

Configurin EMC SAN disks on AIX

This may sound like an absolute rookie question, and it is. I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards. Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch. Can someone... (1 Reply)
Discussion started by: ronellevan
1 Replies

8. AIX

mksysb restore ( vgs on SAN disks)

I have my application vendor looking at this but I want to do my own investigation. I restored from mksysb and I see my vgs that contain my internal disks. But I do not see my vgs that contain disks from the SAN. This scares me .. {{ Ha, ha!! My AIX expert boss just told me I have nothing... (0 Replies)
Discussion started by: Skyybugg
0 Replies

9. Linux

problem with disks on SAN

Hi I have a linux box attched to a SAN storage from EMC with RAID 5 .I understand that it has 3g cache howver a 20gb file creation takes too much time here are my results any ideas why time dd if=/dev/zero of=disk.img bs=1048576 count=20000 20000+0 records in 20000+0 records out 997.59s... (2 Replies)
Discussion started by: xiamin
2 Replies
Login or Register to Ask a Question

Featured Tech Videos