I want to configure one service to come up as a normal strat-up process after reboot, instead of starting it manually.
I tried to configure it in inetd.conf but it didn't work.
Could you please suggest, how I can achieve this ??
As suggested by DukeNuke2, create a script and put it in /etc/rc3.d if you need it running in multi-user-network state. Just remember to name it as S99<script-name>. This will ensure that failure of your script doesn't cause other system service start-ups to fail.
My system suddenly crash and when it rebooted there was an error:
/dev/rdsk/c1t0d0s3 is logging
svc.startd: svc:/network/nis/client:default: Method "/method/yp" failed with status 96.
The system completes booting however when I log in a user account / directory is not longer... (1 Reply)
Hello,
Sometime i see that the boot process hangs.
I am using rhel 6.2.
At that time in the console i see
Probing EDD (edd=off to disable)...
SSH service seems to be started but i can't login...
ssh logs (last lines) in verbose mode level 3:
debug2: we did not send a packet,... (3 Replies)
Hi everybody, I'm running soalris 10, and I would like to know if it posible to boot on single user mode(init s), and then set up (may be manually or not) all the networks services, did someone try this before??
Tks (4 Replies)
Hi experts,
I want to configure a boot server, tried googling for some document for steps and all leads to JumpStart server.
Any help with be much appreciated
Thanks (9 Replies)
Hi,
I have an IA machine on which I want to install the HP 11.31 from LAN.
I have the lan card and ignite server available.
How do I need to configure the LAN card to be able to boot from it and install the OS?
Thanks in advance
Pritam (2 Replies)
Hi all,
I am trying to configure my HPUX host 11.31 IA64 to boot from a LUN for EMC clariion CX3-80 (Flaire PNR 26).
I am following the below mentioned steps..
vi /tmp/idf
3
EFI 500MB
HPUX 100%
HPSP 400MB
idisk -f /tmp/idf -w /dev/rdisk/diskxxx
insf -e
pvcreate -B... (0 Replies)