You don't need to do that as you already know which disk it is from the format command..
In my example it is /dev/dsk/c5t60060E80047F150000007F1500000325d0
If SVM was used then you would need to go one step further.
So in my example there are soft partitions sitting on this SAN disk
Thay are d201 d202 and d204 which are mounted as:
So ssd4 is split into 3 softpartitions mounted as above.
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
Hello all,
Here is the explanation of my problem:
I have a cronjob that connects to a NAS to do backups from my laptop to this NAS device.
The script that I wrote does check if there is a host (the NAS) responding on 192.168.1.10 and tries to connect to it with the following command:
mount -v... (3 Replies)
One of my team colleague mistakenly added non DID device to a metaset in a cluster node and inturn it is again added to concat .
In that metaset all devices are DID devices except only one . is it possible to convert this non DID device in metaset to DID device without recreating the whole... (0 Replies)
I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570? (4 Replies)