Hi everyone
We've bought a Sun T5120 server recently.
I'm currently investigating how much would cost to license the server. According to Oracle's matrix T2 processors are calculated at 0.75 per core, but T2+ processors are calculated at 0.50 per core.
When I run prtdiag -v I get the... (4 Replies)
Hi all,
is it okay for US-III+ running at 1200 MHZ to excced 75° C on sun fire 880
here's the output when i ran prtdiag -v on sunfire 880 running solaris10
bash-3.00# prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Fire 880
System clock frequency: 150 MHz
Memory size: 8192... (2 Replies)
Hi all,
I recently purchased a 440 MHz processor module for my Sun Ultrasparc 5 computer. I installed the module, updated the boot prom to the most recent version and when the machine starts up the initial white screen shows I have a 333 MHz processor installed !
I checked the details of the... (2 Replies)
I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this?
Frank
P.S. If you know of a document somewhere please let me know. (11 Replies)
Sun Blade 2000 UltraSparc III Solaris 8
Notes:
prtdiag:
System Configuration: Sun Microsystems sun4u SUNW,Sun-Blade-1000 (UltraSPARC-III+)
System clock frequency: 150 MHZ
Memory size: 3GB
==================================== CPUs ====================================
... (0 Replies)
I just got an HP 1200se printer. I have it networked using a single print server, so I'd really like to get it working with my Ultra10 system.
I know that there are no Solaris drivers, honestly, I don't know if HP puts out Solaris drivers for any of their stuff.
This printer, and I dunno... (2 Replies)
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)