Visit Our UNIX and Linux User Community


Setting up static ip-adresses, Solaris 10


 
Thread Tools Search this Thread
Operating Systems Solaris Setting up static ip-adresses, Solaris 10
# 1  
Old 03-05-2008
Setting up static ip-adresses, Solaris 10

Hello,

Iam having problems getting more then one ip to work here is my setup!

Hostname: nexus
NIC: e000g1

(example ips)
My ips 80.80.80.15 to 80.80.80.20
Defaultrouter 80.80.80.1

nameservers 80.80.80.100 and 80.80.80.200

How would i do this? Any help would be mutch appriciated! Since my english isnt native so please explain as friendly as possible Smilie

Best regards emtpy
# 2  
Old 03-05-2008
ok,
as friendly as possible:

go to:
System Administration Guide: IP Services
and read the manual... everything is very well explained. if you have specific problems, come back an we'll try to solve this.

good luck and have fun,
DN2
# 3  
Old 03-06-2008
Thanks for the link, but i cant actually find anything about adding the ip-adresses.

I got everything working with dhcp and such, but I cant find how to add more static ip-adresses to my nic e000g1

/empty
# 4  
Old 03-06-2008
Hope this helps:

Code:
<root@agni-sol10> ifconfig hme0 plumb 
<root@agni-sol10> ifconfig hme0 
hme0: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask 0 
        ether 8:0:20:8f:42:f8 
<root@agni-sol10> ifconfig hme0:1 plumb 
<root@agni-sol10> ifconfig hme0:2 plumb 
<root@agni-sol10> ifconfig hme0:3 plumb 

<root@agni-sol10> for iii in hme0:1 hme0:2 hme0:3 hme0 
> do
> ifconfig $iii
> done
hme0:1: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask 0 
hme0:2: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask 0 
hme0:3: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask 0 
hme0: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask 0 
        ether 8:0:20:ee:42:f8 

<root@agni-sol10> ifconfig hme0:1 11.22.33.44 netmask + broadcast + up 
<root@agni-sol10> ifconfig hme0:2 11.22.33.55 netmask + broadcast + up
<root@agni-sol10> ifconfig hme0:3 11.22.33.66 netmask + broadcast + up
<root@agni-sol10> ifconfig hme0 11.22.33.100 netmask + broadcast + up

<root@agni-sol10> for iii in hme0:1 hme0:2 hme0:3 hme0 ^Jdo^Jifconfig $iii^Jdone
hme0:1: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 11.22.33.44 netmask ff000000 broadcast 11.255.255.255
hme0:2: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 11.22.33.55 netmask ff000000 broadcast 11.255.255.255
hme0:3: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 11.22.33.66 netmask ff000000 broadcast 11.255.255.255
hme0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 11.22.33.100 netmask ff000000 broadcast 11.255.255.255
        ether 8:0:20:ee:42:f8

Of course you should make sure that you set this value in the eeprom.
local-mac-address?=true

-GGR
# 5  
Old 03-08-2008
Thanks,

How do i set the netmask the interfaces should use? All use the same.

Tried edit netmask file but dident work.

Thanks bigtime GGR
# 6  
Old 03-08-2008
Quote:
Originally Posted by empty
Thanks,

How do i set the netmask the interfaces should use? All use the same.

Tried edit netmask file but dident work.

Thanks bigtime GGR
post the file... it should work, so maybe you've done something wrog...

# cat /etc/netmasks

and let's have a look,

DN2
# 7  
Old 03-09-2008
Setting up static ip-adresses, Solaris 10

Did not work how? Please provide us with the steps you used to edit the /etc/inet/netmasks file and the steps you used to put into effect the netmasks.

Previous Thread | Next Thread
Test Your Knowledge in Computers #578
Difficulty: Medium
Lists are ordered collections that are essentially static arrays.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

Solaris static IP changed (non DHCP)

We have 2 solaris 10 t5240 servers with static IP addresses on nxge0 I/F which were rebooted a few days back with a known good config that has been in place for years (for /etc/hosts, /etc/hostname.nxge0, /etc/netmasks, etc) They are not using dhcp. About the same time today, both of their... (7 Replies)
Discussion started by: hdatontodo
7 Replies

2. Solaris

Solaris 11 problem with static ip

I have installed Solaris 11.2 in VMware Player, networked in bridged mode. When Solaris uses DHCP everything is OK, I can reach internet, as well as other systems on my LAN. When I switch to static, I have connections to my LAN, but can not get to internet, the DNS resolution is somehow not... (2 Replies)
Discussion started by: migurus
2 Replies

3. Red Hat

Setting Up live FTP Server with Static IP in Red-Hat Linux 6

Hi Guys, I want to some guidance from you in setting up the Live FTP server in Redhat Linux 6 with Static IP 120.50.150.50. Now should I set my Static Public IP directly to my Linux machine? If so what whould be my sunbet mask? Is any type of natting required here? if so where would... (2 Replies)
Discussion started by: manalisharmabe
2 Replies

4. Solaris

ILOM AND ALOM IP adresses

hi guys How to know ILOM and ALOM ip address. how to find the ilom alerts and alom alerts can one help out pls thanks, deepu. ---------- Post updated at 04:39 AM ---------- Previous update was at 04:38 AM ---------- (2 Replies)
Discussion started by: pradeepaasuri
2 Replies

5. IP Networking

Trouble setting up a static IP on NetGear DGN1000

I have been trying to setup a static ip, however everytime I do so my internet disconnects and won't connect untill I switch back to dynamic. My router is a NetGear DGN1000 and I'm using it wired. Could anyone help? (0 Replies)
Discussion started by: zomigosh
0 Replies

6. Solaris

How to assign static ip address to the server having solaris 10. i.e. nge0

hi, how to assign static ip address to the server having solaris 10. assign static ip to nge0 which will sustain across reboots which will include all settings including gateway setting etc.. (2 Replies)
Discussion started by: pankajd
2 Replies

7. Solaris

Solaris - Assign Static IP

Hi, I have cloned a SOLARIS 8 (BLADE 150) Hard Disk and have put into other system. So, now how do I configure the NIC and assign static IP for this new machine ? (8 Replies)
Discussion started by: angshuman_ag
8 Replies

8. UNIX for Dummies Questions & Answers

Static IP address for solaris 10 virtual machine

Hi All I am having a solaris 10 virtual machine on vista (using vmware 7) laptop. Now i want to access virtual machine from vista using putty. Problem is that i insalled the solaris machine as dhcp. and whenever i connect to internet or reboot my system the IP address of solaris... (1 Reply)
Discussion started by: ankurk
1 Replies

9. IP Networking

I need HELP to Set up Coyote Linux router with 1 static IP & 64 internal static IP

hello, i need help on setting my coyote linux, i've working on this for last 5 days, can't get it to work. I've been posting this message to coyote forum, and other linux forum, but haven't get any answer yet. Hope someone here can help me...... please see my attached picture first. ... (0 Replies)
Discussion started by: dlwoaud
0 Replies

10. Solaris

Basic Solaris static routing

Hi All, :(:confused: I have scoured the web and can't find this anywhere. What I am trying to do is set up a static route through an available gateway on a server, and then test connectivity through TELNET. I have done this on AIX (I already had this procedure). On AIX I would use SMIT. ... (7 Replies)
Discussion started by: jeffpas
7 Replies

Featured Tech Videos