Login or Register to Ask a Question and Join Our Community


Solaris

mounting 1TB hard disk with Solaris10 X86

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris mounting 1TB hard disk with Solaris10 X86
# 1  
Old 10-15-2007
mounting 1TB hard disk with Solaris10 X86
I have a 1TB hard disk that I had partitioned on a Sun clone and had 7 partitions of 137GB a piece. (Using a USB to SATA adaptor)
I then had loaded a new hard disk on my laptop (T60...Lenova) with Solaris 10 X86. I tried to mount the hard disk but it kept telling me the mount point was busy and I checked that when I plugged the 1TB disk in via a usb to SATA adaptor the /dev/dsk directory actually created the device which was c2t0d0s0 thru 15.
I have since found that because of the difference between big endian and little endian I am not going to be able to mount the hard disk on my laptop.
So, I formatted the hard disk with my XP laptop disk. I still can't mount the hard disk, even though the solaris10X86 system sees the hard disk. I tried using zpool, zfs, newfs and fdisk.............The system will not let me do anything with any of the partitions of the 1 Terra Byte disk.
The command format does not see the disk.
Anybody got any ideas?
By the way, I found the big endian, little endian thing via a forum after I asked why I couldn't mount it on my laptop after mounting all partitions on my E250 server.
Thanks, M
# 2  
Old 10-16-2007
Did I put this inquiry in the wrong forum?
# 3  
Old 11-09-2007
Network never mind
never mind
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Solaris10(x86) display goes blank

Hi all, Installed Solaris10(1/13) on a normal Lenovo Thinkcenter desktop. The installation could proceed only in text mode (4). Install is success, but not able to get the login window after the grub screen. The screen goes blank. (as was the case when selecting desktop mode during... (7 Replies)
Discussion started by: Solaris_Begin
7 Replies

2. Solaris

X86 solaris10 suddenly stopped mounting flashdrive

I can't mount flash drives and dvd drives on my x86 solaris 10. The error message appears after login; sd_media_watch_cb: dev gone. When I issue #mount /usb, it first shows disk is mounted or busy, and '/dev/dsk/c3t0d0p1 - there is no such device or address' when I repeat it. But the... (5 Replies)
Discussion started by: vectrum
5 Replies

3. Linux

C++ Code to Access Linux Hard Disk Sectors (with a LoopBack Virtual Hard Disk)

Hi all, I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies

4. BSD

Mounting a hard disk in FreeBSD

I have just installed a second hard disk on a FreeBSD machine v8.0. It is seen as new hardware: # dmesg | grep ad4 ad4: 953869MB <SAMSUNG HD103UJ 1AA01113> at ata2-master SATA300 ad4: 953869MB <SAMSUNG HD103UJ 1AA01113> at ata2-master SATA300 However it is not listed in fstab where "ad4"... (2 Replies)
Discussion started by: figaro
2 Replies

5. Solaris

solaris10 x86 stop at GRUB

Dear All I am using Core2Duo processor on G31 chipset motherboard with 1 Gb RAM and 20 GB IDE HDD. I tried to install Solaris 10 from DVD and it installs Successfully without any error. after the first reboot it stop at GRUB prompt. I tried to many times with different partitions layout,... (9 Replies)
Discussion started by: jineetech
9 Replies

6. Solaris

Solaris10 x86 - How to find out the CPU model and speed?

Please let me know if there is any way I can find out (either via command line or SMF) the following: 1.CPU model (eg. Pentium 4,Celeron) 2.CPU speed (eg. 1GHz) for this I could get the output through psrinfo -v, but still is there any other way? 3.Hard disk model (eg. Seagate). When I... (9 Replies)
Discussion started by: saagar
9 Replies

7. Solaris

How to utilize the 2nd hard disk space in x86 solaris 5.10

I have 2 hard disks ,one hard disk(40gb) completely for windows Os,and the other(120gb) for solaris Os. In the second hard disk.I have utilised around 10gb for the solaris installation and also partitioned with the available 10gb space for the solaris x86 OS. Now i need to utilise the... (8 Replies)
Discussion started by: jayaprakash
8 Replies

8. Solaris

Repartitioning hard drive on Solaris10

Hello, Is it possible to repartition hard drive on Solaris10 without deleting all the content of the drive? I have a workstation with 40G drive that has two partitions 4G and 36G. The big partition is allocated for /export/home and small for everything else (don't ask me why, I did not set it up... (1 Reply)
Discussion started by: pn8830
1 Replies

9. Shell Programming and Scripting

IInd Hard Disk Mounting Problem on 1st HDD On SCO UNIX Open Server

Hi Engg. ! :mad: I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching... (0 Replies)
Discussion started by: Niraj Gopal Sha
0 Replies

10. Solaris

Solaris10 x86 on external drives

Hi guys. Am about to install Solaris10 x86 and I was wondering if there are any news as to whether it is possible or not to install the os on an external drive, especially firewire, I suppose I will have to open my tower and put in the drive to install it..the machine I want to put it on,... (0 Replies)
Discussion started by: BSDDomi
0 Replies
Login or Register to Ask a Question