Hello all,
granted that I am an absolute beginner with Solaris, I'd like to use my adsl modem, t's a Zyxel prestige 630.
I managed to install and configure it under Ubuntu using the drivers from Conexant AccessRunner ADSL USB modems with Linux ; is there a chance to do the same under Solaris 10 ?
hi,
I am new to solaris, i download the solaris 11.2 support library and as well search the google but didn't find any information about how to setup usb 3g modem in solaris 11.2, any one can please help me with giving any information or web link? (6 Replies)
In ubuntu etopic i create this udev rules for prolink 3g usb modem:
SUBSYSTEM=="block",
SUBSYSTEM=="scsi",
ATTRS{idVendor}=="1e0e",
ATTRS{idProduct}=="f000",
ACTION=="add",
RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000"
After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Hi,
I need to override ioctl operation for a few USB drivers (sierra, option, cdc-acm) on Linux Ubuntu 2.6.34sb2 to support TIOCOUTQ command.
Unfortunately, none of the drivers I mentioned above support TIOCOUTQ because it seems unclear to know amount of data inside a modem.
Does Linux... (12 Replies)
Hello,
First of all, congratulations on this forum! Very mice material!
This is my fist thread and it has to do with connecting to an adsl modem and executing some commands.
Heres what I do:
$username = 'admin';
$passwd = 'admin';
$telnet = new Net::Telnet ( Timeout=>10,... (2 Replies)
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
Hello There,
I just wanted to know if there is any possible configuration for setting up my external USR USB Modem in Solaris 9 (x86). Any help is definitely appreciated.
Thanks
Khurram Bashir (1 Reply)
Hi,
I have USB Siemens Santis 100 ADSL modem.I need driver for this modem on Solaris 10.Please help me with some info.Platform is x86.Thanks. (2 Replies)
hi guys i know a litter bit of sco openserver 5.0.6 I got my self a 5.0.7 version.
The problem is how do you install a usb modem?
The way i'm used to doit is by serial port , you know tty1A .
Please guys bear with me
Thanks a lot
Jose. (1 Reply)
PPPOE-SNIFF(8) System Manager's Manual PPPOE-SNIFF(8)NAME
pppoe-sniff - examine network for non-standard PPPoE frames
SYNOPSIS
pppoe-sniff [options]
DESCRIPTION
pppoe-sniff listens for likely-looking PPPoE PADR and session frames and deduces extra options required for pppoe(8) to work.
Some DSL providers seem to use non-standard frame types for PPPoE frames, and/or require a certain value in the Service-Name field. It is
often easier to sniff those values from a machine which can successfully connect rather than try to pry them out of the DSL provider.
To use pppoe-sniff, you need two computers, a DSL modem and an Ethernet hub (not an Ethernet switch.)
If the DSL modem normally connects directly to your computer's Ethernet card, connect it to the "uplink" port on the Ethernet hub. Plug
two computers into normal ports on the hub. On one computer, run whatever software the DSL provider gave you on whatever operating system
the DSL provider supports. On the other computer, run Linux and log in as root.
On the Linux machine, put the Ethernet interface into promiscuous mode and start pppoe-sniff. If the ethernet interface is eth0, for exam-
ple, type these commands:
ifconfig eth0 promisc
pppoe-sniff -I eth0
On the other machine, start your DSL connection as usual. After a short time, pppoe-sniff should print recommendations for the value of
PPPOE_EXTRA. Set this value in /etc/ppp/pppoe.conf. If pppoe-sniff indicates that something special is required in PPPOE_EXTRA, please e-
mail this to pppoe@roaringpenguin.com along with the name of your ISP and the manufacturer and model number of your DSL modem. This infor-
mation will be collated and provided on the PPPoE web page for users who do not have two computers.
After pppoe-sniff finishes (or you stop it if it seems hung), remember to turn off promiscuous mode:
ifconfig eth0 -promisc
OPTIONS -I interface
The -I option specifies the Ethernet interface to use. Under Linux, it is typically eth0 or eth1. The interface should be "up" and
in promiscuous mode before you start pppoe-sniff.
-V The -V option causes pppoe-sniff to print its version number and exit.
BUGS
pppoe-sniff only works on Linux.
AUTHORS
pppoe-sniff was written by David F. Skoll <dfs@roaringpenguin.com>.
The pppoe home page is http://www.roaringpenguin.com/pppoe/.
SEE ALSO adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5), pppoe(8), adsl-setup(8), adsl-status(8), pppoe-server(8), pppoe-
relay(8)4th Berkeley Distribution 3 July 2000 PPPOE-SNIFF(8)