Solaris Network doesn't work properly

10 More Discussions You Might Find Interesting

1. Solaris

Drop_caches doesn't work on Solaris but works on RHEL6

Hello Experts, I am performing performance tests on a few mysql select queries. I use the following command to clear the memory disk caches. sync && echo 3 | sudo tee /proc/sys/vm/drop_caches I however see that the above command works on RHEL6 but doesn't work on Solaris 10. I asked...

2. Red Hat

TAB button doesn't work properly

Hi, I have list of files under a directory as shown below. /home/root -rw-r--r-- 1 user 0 Aug 27 06:08 rough.txt -rw-r--r-- 1 user 0 Aug 27 06:08 test.sh Now when i use to read the rough.txt, i did cat r and then pressed TAB button. Below is the resulting string after pressing TAB...

3. Solaris

Mount command doesn't work on Solaris System

Hi All, I am using a solaris Sun-Fire-V440 server. The OS is solaris. My problem is whenever I run the command mount | grep "^/ " | sed -e 's,^.*dsk/$*$.*$,\1,' it should return a disk value as "d30" as it does on each of my other servers.But on this server I am not getting any o/p from...

4. Solaris

Solaris 10, Samba 358 doesn't work after patching

Hi Forum, I updated my Solaris 10 (10/09) with the current Oracle patch file and moved the smb.conf to /etc/samba/smb.conf. Anyway, since patching, no Windows client is able to connect the share. It says password is wrong, but its the right pw. My smb.conf: bash-3.00# cat...

5. UNIX and Linux Applications

Gvim doesn't work properly

Hello All, I am using gvim ( redhat linux machine). backspace doesnot work properly. can some boby suggest a solution ? i have checked with older version. backspace works in it. Thanks Shiv

6. Solaris

grep -e doesn't work on solaris

grep -e doesn't work in Soalris. Same script with grep -e worked on AIX/HP/LINUX.. I would like to search a list of patterns on "log.txt" like ... grep -e FATAL -e ERROR log.txt I get the error message as grep: illegal option -- e Usage: grep -hblcnsviw pattern file . . .

7. UNIX for Dummies Questions & Answers

Mail/Xmail doesn't work on Solaris 10

Hi again everyone. I have recently installed Solaris 10 on a server. Everything seems to work fine (users can be added and can log in, internet connectivity works, etc). However I'm struggling to get mail or mailx to work. Say there are two users on my server, Bob and Mary. Server hostname...

8. HP-UX

pstat_getdisk() call doesn�t work properly in HPUX 11.31 (11i V3)

As per the man page, pstat_getdisk() call returns the number of instances, which could be 0 upon successful completion, otherwise a value of -1 is returned. Please have a look at this sample program -> #include <stdio.h> #include <sys/pstat.h> int main() { int j = 0, ret; struct...

9. Shell Programming and Scripting

ls -d doesn't work on Solaris

Hello, the ls -d command to only list directories in a directory doesn't seem to work on Solaris and the man command says to use that combination: ls -d Anyone have the same problem and find a resolve? Thanks BobK

10. UNIX for Advanced & Expert Users

rcp on solaris doesn't work

Hi I have 2 Solaris boxes A and B, A running solaris 9, and B running solaris 6. when i try to use rcp on A like this:- A> rcp file.txt B:/path/file.txt I get into standard input and nothing happens!! Then On the target machine B, if i try, B> rcp otherfile.txt B:/path/otherfile.txt...

LEARN ABOUT ULTRIX

dhcp

dhcp(5) 						Standards, Environments, and Macros						   dhcp(5)

NAME

       dhcp - Dynamic Host Configuration Protocol

DESCRIPTION

       Dynamic	Host Configuration Protocol (DHCP) enables host systems in a TCP/IP network to be configured automatically for the network as they
       boot. DHCP uses a client/server mechanism: servers store configuration information  for	clients,  and  provide	that  information  upon  a
       client's request. The information can include the client's IP address and information about network services available to the client.

       This manual page provides a brief summary of the Solaris DHCP implementation.

   Solaris DHCP Client
       The  Solaris  DHCP  client  is implemented as background daemon, dhcpagent(1M). This daemon is started automatically during bootup if there
       exists at least one dhcp.interface file in /etc. Only interfaces with a corresponding /etc/dhcp.interface file are automatically configured
       during  boot.  Network  parameters  needed for system configuration during bootup are extracted from the information recieved by the daemon
       through the use of the dhcpinfo(1) command. The daemon's default behavior can be altered by changing the tunables in the  /etc/default/dhc-
       pagent  file.  The  daemon is controlled by the ifconfig(1M) utility. Check the status of the daemon using the netstat(1M) and ifconfig(1M)
       commands.

   Solaris DHCP Server
       The Solaris DHCP server is implemented as a background daemon, in.dhcpd(1M). This daemon can deliver network configuration  information	to
       either  BOOTP  or  DHCP	clients.  The Solaris DHCP service can be managed using the dhcpmgr(1M) GUI or the command line utilities dhcpcon-
       fig(1M), dhtadm(1M), and pntadm(1M).

   DHCP Configuration Tables
       The Solaris DHCP server stores client configuration information in the following two types of tables:

       dhcptab tables	       Contain macros and options (also known as symbols), used to construct a package	of  configuration  information	to
			       send to each DHCP client. There exists only one dhcptab for the DHCP service. The dhcptab(4) can be viewed and mod-
			       ified using the dhtadm(1M) command or dhcpmgr(1M) graphical utility. See dhcptab(4) for more information about  the
			       syntax of dhcptab records. See dhcp_inittab(4) for more information about the DHCP options and symbols.

       DHCP network tables     DHCP  network  tables,  which  contain  mappings of client IDs to IP addresses and parameters associated with those
			       addresses. Network tables are named with the IP address of the network, and can be created,  viewed,  and  modified
			       using  the  pntadm  command  or	dhcpmgr  graphical utility. See dhcp_network(4) for more information about network
			       tables.

SEE ALSO

       dhcpinfo(1), dhcpagent(1M), dhcpconfig(1M), dhcpmgr(1M),  dhtadm(1M),  ifconfig(1M),  in.dhcpd(1M),  netstat(1M),  pntadm(1M),  syslog(3C),
       dhcp_network(4), dhcptab(4), dhcpsvc.conf(4), dhcp_inittab(4), dhcp_modules(5)

       Solaris DHCP Service Developer's Guide

       Alexander, S., and R. Droms. RFC 2132, DHCP Options and BOOTP Vendor Extensions.  Silicon Graphics, Inc. Bucknell University. March 1997.

       Droms, R. RFC 1534, Interoperation Between DHCP and BOOTP. Bucknell University. October 1993.

       Droms, R. RFC 2131, Dynamic Host Configuration  Protocol. Bucknell University. March 1997.

       Wimer, W. RFC 1542, Clarifications and Extensions for the Bootstrap Protocol. Carnegie Mellon University. October 1993.

SunOS 5.10							    13 Mar 2001 							   dhcp(5)

Solaris