Thoughts/experiences of SAN attaching V880 to EMC SAN


 
Thread Tools Search this Thread
Operating Systems Solaris Thoughts/experiences of SAN attaching V880 to EMC SAN
# 1  
Old 02-25-2007
Thoughts/experiences of SAN attaching V880 to EMC SAN

Hi everyone,

I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN?

At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the internal disks are mirrored in a RAID 0+1 configuration.

I have 2 choices to make as we intend to increase the number of db's running on the machine(s) - these options are:

1 - To directely attach the servers to the EMC SAN with FC HBA's.

2 - To purchase StoredgeTek SCSI shelves and use SVM to manage the disks (FCAL is overkill to be honest).

I know there are all sorts of ways the SAN can stripe and chop up the disks to allow for RAID 5 etc and that SVM will make a pretty good job of doing the same on the SCSI shelves.

However I do not know if there are any significant technical advantages/disadvantages for either of these two methods.

Does anyone have any thoughts on this?

My own concerns are the reliability of the connection to the SAN as apposed to directly attaching the SCSI shelves. I feel keeping the SUN kit self-contained may be preferable in the long run.

Appreciate the time taken to read and reply.

Si
# 2  
Old 02-25-2007
Irrespective of the storage used it is usually much easier if you use host based mirroring, as this allows you to do backups using the detached mirror of a raid 1, and apply the correct logic for making sure the backup is clean, for example to quiece a database while the mirror is being detached.

RAID5 in hardware would protect you from failure of a disk during the time the mirror is deatached. Personally I find attached fiber storage much easier to work with than SCSI becasue there is no need for example to configure multiple initiators and things like that, also it much easier to configure a multi-pathed configuration.

You could consider doing a mixture of the two, something like 3511 JBODs, with SATA disks and attached them using fiber HBAs, you wouldn't have the RAID 5, but you would have the extra low cost storage. This would also offer you the possibility of moving onto the SAN at a later stage, with much less work.

Last edited by reborg; 02-26-2007 at 10:29 PM..
# 3  
Old 02-26-2007
THis is a question of intent and expected future growth of not only the app but the business you are supporting. If there is a high growth potential of the business with a requirement for hig performance then I would invest in a EMC and throw in a Mcdata Fiber switch. If this is the case, then a netbackup solution should natually follow given its benefits of backing up and enterprise environment (hot backups, incremental backups, etc.).
This configuration will lend its itself much better to adding systems,clustering for ha, application clustering, performance, etc.
Your concern of reliability is addressed with dual paths to the EMC (preferibly on different PCI cards) using DMP on the Host.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Faster way: SAN hd to SAN hd copying

hi! i got a rhel 6.3 host that already have an xfs filesystem mounted from a SAN (let's call it SAN-1) whose size is 9TB. i will be receiving another SAN (let's call it SAN-2) storage of 15TB size. this new addition is physically on another SAN storage. SAN-1 is on a Pillar storage while the new... (6 Replies)
Discussion started by: rino19ny
6 Replies

2. Solaris

Solaris 10 booting from EMC SAN DISK

Hi All, I have server : Sun-Fire-V490 configured with Solaris 10 zfs .. and I have configured three mirror the third one from EMC storage. root@server # zpool status -v pool: rpool state: ONLINE status: The pool is formatted using an older on-disk format. The pool can ... (8 Replies)
Discussion started by: top.level
8 Replies

3. AIX

IBM SAN TO SAN Mirroring

Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage. DS5020 mentions Enhanced Remote Mirror to multi-LUN applications I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Discussion started by: filosophizer
1 Replies

4. Solaris

Attaching 1TB external drive to SunFire v880

Hi I have a 1TB external drive that I want to attach to a SunFire v880 server which runs on Solaris 9. After attaching the external drive what commands should I issue so that the drive will be seen by the server? (7 Replies)
Discussion started by: rahmantanko
7 Replies

5. AIX

Configurin EMC SAN disks on AIX

This may sound like an absolute rookie question, and it is. I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards. Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch. Can someone... (1 Reply)
Discussion started by: ronellevan
1 Replies

6. IP Networking

SAN basics

Hi I like to learn and practice SAN, iSCSI. Could you sugges the appropriate tutorial and small tasks to practice SAN. Thankyou (1 Reply)
Discussion started by: kingskar
1 Replies

7. Solaris

How to configure my SAN with Sun V880 servers to run Oracle 9i

Hi: I am in the process of configuring the SAN for Solaris to host 6 oracle 9i databases. We have 30 -146 GB disks stiped with RAID 10 for SAN. Of which 11 are dedicated for databsaes related things. Then we have 2 v880 Sun Servers with 16 -73 GB disks and 24 GB memory. The questions... (1 Reply)
Discussion started by: oracle_dba
1 Replies

8. AIX

San:

hi We have 2 AIX nodes running with HACMP and all of them connected to SAN, Our shared storage is shark; I need to create shared volume group and I need the HACMP take a ware of it. Regards (1 Reply)
Discussion started by: h2aix
1 Replies

9. UNIX for Dummies Questions & Answers

what is SAN

Hello all, I have looked at the entire posting that have SAN in it and I'm still fuzzy on how SAN works. I understand that every disk array can be access from any server that needs it, but is there software that is install or NFS mount type situation. One post stated that if your format command... (7 Replies)
Discussion started by: larry
7 Replies
Login or Register to Ask a Question