Visit Our UNIX and Linux User Community


Can I create virtual disk from zpool on Solaris 11.4 for OVM?


 
Thread Tools Search this Thread
Operating Systems Solaris Can I create virtual disk from zpool on Solaris 11.4 for OVM?
# 1  
Old 03-11-2020
Can I create virtual disk from zpool on Solaris 11.4 for OVM?

Hello,

I am here again, with another issue.

I am setting up a new Oracle VM setup (GUI). On the backend, it is ldom concept, but GUI seems to have an easier interface.
For now, we don't have any SFP module and these two S7 Sparc servers are not connected to Storage, so I have to live with local disks only. Now the limitation comes here.
I will create one repository with one local disk and can create VM's from that. That means, VM will be sitting on that repository, which is made of local disk. If ever, I want to replace that local disk (due to hard/transport/bad errors), I will not be able to migrate these VMs to another repository/pool because these VMs are on local disk. This will be a bad design.
Even if I create zpool with two disk, I thought I should be able to see that pool in OVM. But from Oracle VM perspective GUI Manager does not recognize zpools, only disk. I created a case with Oracle for best practice to be used for this and they responded -- "OVM is not designed to manage redundancy with local disks. That is why Oracle VM is capable to handle SAN Storage over the network or even fiber channel. Now from Solaris perspective, I think that you can manually assign zpool as virtual disk to the LDOMs guest, but you need to do research on this if this is possible"

I tried to google and didn't find any relevant note, if I can create virtual disks from zpool.

Another idea came in my mind was, if I can create hardware RAID, then OS will see that single disk, but then I found this link - Hardware RAID Support -
SPARC and Netra SPARC S7-2 Series Servers Administration Guide
and it denies it.

Any suggestions or ideas, please ?

Thanks
# 2  
Old 03-12-2020
Lets start with how many disks do you have in that box and what size ?
Did the operating system come install over entire devices (s2) ?
Can you show zpool status rpool on that box.

You have 3 choices for disks to use in ldoms :

1.) Reinstall the hypervisor on slice not entire disk, partitioning it in text installer and using VTOC label.
OR detach one of mirror disks, repartition with slice 0, attach. This will require that you have free space in rpool for such actions.
Then the other disk s0 after rebuild/resilver is complete - be sure to check eeprom and primary domain for boot device specification.
Reboot the server to confirm everything is ok.

After that, 2 x slice 0 (s0) will make rpool zpool, and all other slices (except s2!) can be used in ldoms after partitioning via format with free space.

Example, you have 2 x 300 GB, with slice 0 (s0) of 100 GB on each disk. You install operating system on it or repartition, attach, detach.
You are left with s1 to s6 (VTOC label, s2 excluded as it represents entire disk) to use with ldm add-vdsdev options=slice /dev/dsk/cNtNdNs1... on both disks.
Followed by a ldm add-vdisk id=<num> ... <ldom>
Add, for instance, s1 slices from both disks to ldom and create a mirrored rpool inside.

When you get SAN lun, you will add that lun to LDOM, and make a three way mirror of existing pool.
After the resilver is complete, you will detach and remove 2 local disks.
This would be mid level in terms on ease of setup.


2.) Creating ZVOL in existing zpool and adding /dev/zvol/dsk/ ... to LDOM.
Same with SAN lun afterwards, you add it, mirror and detach the old ZVOL after inside LDOM.
This will be worst performance, but easiest to setup on existing configuration.

3.) Combination of 1.) and SVM.
You mirror two slice 1 (s1) with all remaining space on SVM level and create soft partitions which you present to ldom as entire devices /dev/md/dsk..
Migration is done after the SAN lun is available to hypervisor via [/icode]meta..[/icode] commands on the hypervisor level or inside LDOM via zpool [attach|detach] commands.
This is the most complicated way and would advise against it if you do not have SVM experience.

No downtime is required for any operations above, unless, of course, you reinstall the hypervisor entirely.

Hope that helps
Regards
Peasant.
# 3  
Old 03-12-2020
Thanks for wonderful explanation. Here is my current setup.
There are 6 x 1TB disks. I installed Solaris 11.4 on the first entire disk and then mirrored it in rpool with the second disk. That gives me 4 disks of 1 TB each.
Code:
root@ovmi-host1:/# echo | format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t5000C500C1FD0833d0 <SEAGATE-ST1200IN9SUN1.2T-ORA6-1.09TB>
          /scsi_vhci/disk@g5000c500c1fd0833
          /dev/chassis/SYS/HDD0/disk
       1. c0t5000C500C1FD0337d0 <SEAGATE-ST1200IN9SUN1.2T-ORA6-1.09TB>
          /scsi_vhci/disk@g5000c500c1fd0337
          /dev/chassis/SYS/HDD1/disk
       2. c0t5000C500C1FD03ABd0 <SEAGATE-ST1200IN9SUN1.2T-ORA6-1.09TB>
          /scsi_vhci/disk@g5000c500c1fd03ab
          /dev/chassis/SYS/HDD2/disk
       3. c0t5000C500C1FD0C9Fd0 <SEAGATE-ST1200IN9SUN1.2T-ORA6-1.09TB>
          /scsi_vhci/disk@g5000c500c1fd0c9f
          /dev/chassis/SYS/HDD3/disk
       4. c0t5000C500C1FD0CA7d0 <SEAGATE-ST1200IN9SUN1.2T-ORA6-1.09TB>
          /scsi_vhci/disk@g5000c500c1fd0ca7
          /dev/chassis/SYS/HDD4/disk
       5. c0t5000C500C1FD03CFd0 <SEAGATE-ST1200IN9SUN1.2T-ORA6-1.09TB>
          /scsi_vhci/disk@g5000c500c1fd03cf
          /dev/chassis/SYS/HDD5/disk
       6. c1t0d0 <MICRON-eUSB DISK-1112-1.89GB>
          /pci@300/pci@1/pci@0/pci@2/usb@0/storage@1/disk@0,0
          /dev/chassis/SYS/MB/EUSB_DISK/disk
Specify disk (enter its number): Specify disk (enter its number):
root@ovmi-host1:/# zpool list
NAME    SIZE  ALLOC  FREE  CAP  DEDUP  HEALTH  ALTROOT
rpool  1.09T   175G  937G  15%  1.00x  ONLINE  -
root@ovmi-host1:/# zpool status rpool
  pool: rpool
 state: ONLINE
status: The pool is formatted using an older on-disk format. The pool can
        still be used, but some features are unavailable.
action: Upgrade the pool using 'zpool upgrade'. Once this is done, the
        pool will no longer be accessible on older software versions.
  scan: resilvered 171G in 15m50s with 0 errors on Mon Mar  2 16:24:24 2020

config:

        NAME                       STATE      READ WRITE CKSUM
        rpool                      ONLINE        0     0     0
          mirror-0                 ONLINE        0     0     0
            c0t5000C500C1FD0833d0  ONLINE        0     0     0
            c0t5000C500C1FD0337d0  ONLINE        0     0     0

errors: No known data errors
root@ovmi-host1:/#

When I login to OVM Manager, select "create repository", select this server, select "physical disks", it gives me 4 disks in below format to select from. Here I can choose any disk and create a repository
Code:
Name			Size (GiB)
35000c500c1fd03cf	1117.81
35000c500c1fd0ca7	1117.81
35000c500c1fd0c9f	1117.81
35000c500c1fd03ab	1117.81

# 4  
Old 03-12-2020
My advice/suggestion is Oracle VM server for SPARC using ldm and format commands from shell/hypervisor.

I have not used OVM manager or storage repositories, so i cannot be of much help further.

Regards
Peasant.
This User Gave Thanks to Peasant For This Post:

Previous Thread | Next Thread
Test Your Knowledge in Computers #905
Difficulty: Easy
Generally speaking, Unix systems are commercial, closed source and propriety operating systems so it is expensive to customize for supercomputing projects. Linux, on the other hand, is free and easier to customize.
True or False?

10 More Discussions You Might Find Interesting

1. Solaris

Replace zpool with another disk

issue, I had a zpool which was full pool_temp1 199G 197G 1.56G 99% ONLINE - pool_temp2 199G 196G 3.09G 98% ONLINE - as you can see, full so I replaced with a larger disk. zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0... (2 Replies)
Discussion started by: rrodgers
2 Replies

2. Solaris

Solaris 10 virtual disk (ramdisk) create for sun4v (T-2000 simulator) architecture

have been trying to create a 2 GB ramdisk (virtual) to run on my T-2000 simulator (Legion) which has sun4v architecture. I have a SPARC workstation which runs on sun4u architecture with Solaris 10. I have created a ramdisk image using dd command, newfs, then used ufsrestore to restore the... (3 Replies)
Discussion started by: Zam_1234
3 Replies

3. Solaris

Add disk to zpool

Hi, Quick question. I have a data zpool that consists of 1 disk. pool: data state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM data ONLINE 0 0 0 c0t50002AC0014B06BEd0 ONLINE... (2 Replies)
Discussion started by: general_lee
2 Replies

4. Solaris

Create a boot disk mirror on Solaris 10 x86

I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Discussion started by: TKD
6 Replies

5. Solaris

How to create metadb with zpool in Solaris 11

Hi, my root pool is as follows. How can I create a metadb if I want to create SVM volumes? zpool status pool: rpool1 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool1 ONLINE 0 0 0 c4t1d0s0 ... (10 Replies)
Discussion started by: incredible
10 Replies

6. Solaris

How to create virtual disks in solaris

Hi, I have installed oracle 10g release 2 on solaris 10 Zone. I want to configure ASM in local Zone using virtual disks in place of real disks. I have configured ASM using virtual disks in place real disk in Solaris 10 Global zone. How i can do in local Zone Kindly guid me with proper... (1 Reply)
Discussion started by: malikshahid85
1 Replies

7. Solaris

create Virtual NIC in Solaris 10

Hi All, does any body know how to create Virtual NIC in Solaris 10 if any one have good article or reference kindly provide me i try to Google but i didn't find good one (7 Replies)
Discussion started by: jamisux
7 Replies

8. Solaris

How to create mirror disk in solaris machine?

hi, I'm newbie in Solaris 10. can someone explain me the steps of how to create mirror disk in Solaris machine. thanks in advance (5 Replies)
Discussion started by: Wong_Cilacap
5 Replies

9. Shell Programming and Scripting

Virtual disk to create and partition

I have to do this exercise: Create a virtual disk Partition this disk Create File system Mount File System I'm using Minix (which runs by Qemu as guest machine) on Linux (Host) Is there anybody who knows how to solve first three point? :confused: Thanks (4 Replies)
Discussion started by: Guccio
4 Replies

10. Solaris

How to create new partitions in solaris,from the raw disk?

Hi all, I would like to know how to make new partitions.... I currently have allocated 60G for various slices (I have totally used 4 out of 7 available slices... I am running only solaris on my box. My plan is to have entire disk dedicated to solaris and run other OS from within... (19 Replies)
Discussion started by: wrapster
19 Replies

Featured Tech Videos