Help with Reviving a NETRA240 Pls?


 
Thread Tools Search this Thread
Operating Systems Solaris Help with Reviving a NETRA240 Pls?
# 15  
Old 11-28-2018
Clock Stable w/ New Battery, "Break" command & USB Port Not Working.

Dear Hicksd8,

OK, new battery is keeping the system clock stable. Thanks for the heads up Hicks! Smilie Here is the latest SC action to celebrate:

Code:
ALOM BOOTMON v1.5.4
ALOM Build Release: 008
Reset register: e0000000 EHRS ESRS LLRS

ALOM POST 1.0

TTYD - Internal Loopback Test, PASSED.

Memory Data Lines Test
Memory Data Lines Test, PASSED.

Memory Address Lines Test
  Slide address bits to test open address lines
  Test for shorted address lines
Memory Address Lines Test, PASSED.

Memory Parity Test
Memory Parity Test, PASSED.

Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.

Return to Boot Monitor for Handshake
ALOM POST 1.0
   Status = 00007fff

Returned from Boot Monitor and Handshake

Clearing Memory Cells
Memory Clean Complete

Loading the runtime image...
SC Alert: CRITICAL ALARM is set

SC Alert: SC System booted.

Sun(tm) Advanced Lights Out Manager 1.5.4 ()

Full VxDiag Tests

BASIC TOD TEST
  Read the TOD Clock:        WED NOV 28 13:58:57 2018
  Wait, 1 - 3 seconds
  Read the TOD Clock:        WED NOV 28 13:58:59 2018
BASIC TOD TEST, PASSED

ETHERNET CPU LOOPBACK TEST
  50 BYTE PACKET   - a 0 in field of 1's.
  50 BYTE PACKET   - a 1 in field of 0's.
  900 BYTE PACKET  - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED

Full VxDiag Tests - PASSED

    Status summary  -  Status = 7FFF

       VxDiag    -          -  PASSED
       POST      -          -  PASSED
       LOOPBACK  -          -  PASSED

       I2C       -          -  PASSED
       EPROM     -          -  PASSED
       FRU PROM  -          -  PASSED

       ETHERNET  -          -  PASSED
       MAIN CRC  -          -  PASSED
       BOOT CRC  -          -  PASSED

       TTYD      -          -  PASSED
       TTYC      -          -  PASSED
       MEMORY    -          -  PASSED
       MPC850    -          -  PASSED

Please login: admin
Please Enter password: *********

sc> showdate
WED NOV 28 13:59:23 UTC 2018
sc> showdate
WED NOV 28 13:59:40 UTC 2018
sc> showdate
WED NOV 28 13:59:45 UTC 2018
sc> showdate
WED NOV 28 13:59:46 UTC 2018
sc> showdate
WED NOV 28 13:59:47 UTC 2018
sc>
sc> poweron
sc> break
Break command is disabled when system is powered off.
sc> poweroff
Host system power is already off
sc> poweron
sc> poweron
sc> poweron
sc> break
Break command is disabled when system is powered off.
sc> poweroff
Host system power is already off

There was some headache from mushy tiny battery positive terminals. To get the little new battery going, I had to slide in some wires under them and press them down with a tiny piece of electrical tape. I could be useful for somebody else in these situations, so I took pictures with my phone. Wire thickness must be right, and no aluminium foil did not work, in my case at least.

Help with Reviving a NETRA240 Pls?-wp_20181128_024jpg


However "poweron"-"poweroff" problem is the same. Still thinks systems is not powered and break command does not work. DVR-ROM Still does not power up or respond to front keypress. I tried the USB ports with a brand new Sandisk memory stick, tested on 2 machines. Both plugging during operation and plugging before power up did not make it show on FRU list with "showfru" command.

Which brings us to motherboard jumper situation. Below are the info available in the manual about Netra240 motherboard jumpers:
Help with Reviving a NETRA240 Pls?-netra240-board-jumpers-01jpg

Code:
JP1[1]
-------------
1-2 Fitted
3-4 Fitted
5-6 Not fitted
7-8 Not fitted
9-10 Fitted
Processor core voltage. Do not alter this jumper setting. Changing the setting for JP1 could cause damage to the server.


JP2
-------------
1-2 Not fitted
ALOM Flash ROM swap halves. Only service personnel should modify this setting. Fitting a jumper affects the swap.


JP3
-------------
1-2 Not fitted
ALOM reset. Used only for testing the system.


JP4
-------------
1-2 Fitted
3-4 Fitted
5-6 Not fitted
7-8 Not fitted
9-10 Not fitted
System configuration. Do not alter this jumper setting.


JP5
-------------
1-2 Not fitted
Only service personnel should modify this setting. Do not change the settings for the JP5 jumper. Only service personnel should modify the settings for this jumper.


JP6
-------------
1-2 Fitted (this is a non-functional setting)
2-3 Not fitted
ROMBO enable. Only service personnel should modify this setting. Fit jumper to 2-3 to enable ROMBO.


JP8
-------------
1-2 Fitted
Clear CMOS. Only service personnel should modify this setting. Fit jumper to 2-3 to clear CMOS.


JP10
-------------
1-2 Not fitted
Override PSON#. Only service personnel should modify this setting.


JP11
-------------
1-2 Not fitted
ROM write-protect. Only service personnel should modify this setting.


JP12
-------------
1-2 Not fitted
ALOM console bypass. Only service personnel should modify this setting.


JP13
-------------
1-2 Fitted (this is a non-functional setting)
2-3 Not fitted
OpenBoot PROM Flash ROM swap halves. Only service personnel should modify this setting. Fit jumper to 2-3 to affect swap.


JP14
-------------
1-2 Not fitted
ALOM AFT mode. Used for testing the system only.

Here is an overall picture of the board with current jumper positions:

Help with Reviving a NETRA240 Pls?-wp_20181128_001jpg


I will follow with an ordered picture gallery of jumpers taking care to show jumper number and whether they are set or not.

Soon.

Last edited by ozsavran; 11-28-2018 at 08:43 AM..
# 16  
Old 11-28-2018
Found this:

Netra T1 AC200 ignoring all serial LOM commands - Servers General Discussion

so it seems like your problem is not unique.

At this point I wouldn't be changing mobo jumpers though.
This User Gave Thanks to hicksd8 For This Post:
# 17  
Old 11-28-2018
How About the Power we Supply to Her? :)

That link was great tried a few things they suggested. This may have various reasons, but they all related to some hardware connection it seems. Speaking of that, I was kinda suspicious of the dinky power connection I concocted here. Sun in all its wisdom made a special DC power connector it seems from this manual they have for that esteemed "product" design:

Code:
https://docs.oracle.com/cd/E19256-01/806-2073-10/806-2073-10.pdf

That is exactly what we have here:
Help with Reviving a NETRA240 Pls?-wp_20181103_001jpg


And I do not even have space to make a ground connection.

Help with Reviving a NETRA240 Pls?-netra_001jpg

Following the + / - signs, I just connected +48V to the + terminal, power return to the - terminal, that's it. Could it be that the curiously hunky DC-2-DC power converter we slide in is testing whether we have a legitimate Sun AC-2-DC power supply connected to it? Could this be why its refusing to admit that it in fact has power supplied to it??
# 18  
Old 11-28-2018
Quote:
Originally Posted by ozsavran
Following the + / - signs, I just connected +48V to the + terminal, power return to the - terminal, that's it.
That's what? Are you saying it's working?
# 19  
Old 11-28-2018
My apologies Hicks, no its not working, still the same. Since this is a hardware problem, I was simply saying maybe my issue here is the most basic one, my power connection. What I made is a 2-wire connection to a 3-wire socket. I will try correcting that ny replacing the unique plastic connector Sun used with a good quality, market standard metal sleeved 3-wire connector. See if that makes a difference. I am not touching the mobo jumpers per your suggestion.
# 20  
Old 11-30-2018
You could be looking for a poor power connection to the mobo somewhere. I would be reseating all power cables, edge connectors, etc. When you 'poweron' do the CPU fans start? (although I can't remember, I assume that they plug into the mobo). Could, of course, also be a dry joint somewhere.
This User Gave Thanks to hicksd8 For This Post:
# 21  
Old 12-01-2018
Earthing question is crossed off.

Correct, Hicks. Thanks. I will do that whenever I have a chance to sit down on it again. Meanwhile I had crossed off the grounding question. Problem is not that.
Help with Reviving a NETRA240 Pls?-wp_20181129_009jpg
Help with Reviving a NETRA240 Pls?-wp_20181129_011jpg



And I tried both "bootmode diag" command, which does nothing in terms of additonal info, and taking out the cracked front switch bezel and turning the knob shaft with small pliers to Diagnostic position. The flat part of the shaft aligns with the arrow on the cracked blue bezel. I am not sure was really done, as it did not do anything different during SC boot. Maybe the plastic knob shaft is also loose working intermitently. However, it did worked fine and recognized position of the front switch when I turned it leftmost, to "permanent standby" and SC did not even allow me use the "poweron" command. So we can assume the front system switch does indeed function as long as I can put it in required position. Didn't want to jam pliers in any more for fear of breaking that knob shaft too.
Help with Reviving a NETRA240 Pls?-wp_20181130_005jpg
Help with Reviving a NETRA240 Pls?-wp_20181130_001jpg



Having some diagnostics would sure be useful. Will work more on restoring that too.

Last edited by ozsavran; 12-01-2018 at 03:50 PM..
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

NETRA240 in HLR CDMA Wireless Exchange... help is apreciated

Greetings, I hope my post finds you all OK, I have a Netra240 server in an HLR inside a wireless CDMA Exchange, it works as a Hard Disk Unit (HDU) as shown in Local Management Terminal (LMT) as show in the picture 1 attached. The power went down because of a power failure in main UPS, when... (2 Replies)
Discussion started by: Sharista
2 Replies

2. Homework & Coursework Questions

Help pls

How to find the ten most common words in a file (1 Reply)
Discussion started by: jass
1 Replies

3. UNIX for Dummies Questions & Answers

HELP PLs

I have this code: #!/bin/sh awk 'BEGIN NR == 2 repl = "PHI" $4 = repl print $0 'dryloop.txt and this code: #!/bin/sh sed -e '1s/\|$/\|COMID\|/g' -e 's/^087.*$/&PHI\|g' hl.dsldryloop > textdry.txt My code won't work. I want to change the COMID of lines starting with 087 . this is my... (15 Replies)
Discussion started by: arkhei
15 Replies

4. Shell Programming and Scripting

Pls Pls do help me

When i run this command, everything is ok. The file can be email and attached but soon after i download the file, the file cant be read. It's seem corrupted. Totally cant be read although i'm using context or wordfile. Original file generated at ek_bkup/alert/tbspace_datafile.log is OK..... ... (7 Replies)
Discussion started by: adzuanamir
7 Replies

5. Shell Programming and Scripting

pls help

Hi, I need your help guys. I have two data files, namely 101.amberized.pdb & 101.pdb . Now I want to replace the whole 3rd column of 101.amberized.pdb with the 3rd column of 101.pdb file. How do I do it in shell? Thanks in advance Parimal (11 Replies)
Discussion started by: chuchu
11 Replies

6. Shell Programming and Scripting

pls help

I have a list of variables: ss1, ss5, ss6, ss8, st2 etc. (these values are not fixed, configurable). Now, I have assigned ss5=”test”. And I want to search in the list for the string “test” to know which variable is having the value “test”. Can u pls tell me how to do this? (10 Replies)
Discussion started by: kanchan_cp
10 Replies

7. UNIX for Dummies Questions & Answers

Help pls!

Hi... Why should I press F1 to start windows?! I have Xp in my computer... thx 4 help Cano (1 Reply)
Discussion started by: Cano
1 Replies

8. UNIX for Dummies Questions & Answers

Pls Help

Hi every one I have got very very bad Email, My question is: How can I get all information about that f*** Email, I do mean IP,reall name, Adress, user name, password etc... I wonder if there is any program or website that I can see that email, help me please When I used windows Xp(old... (2 Replies)
Discussion started by: Cano
2 Replies

9. UNIX for Dummies Questions & Answers

Need help pls

Hi, I'm a newbie. I need help on my first assignment in UNIX. 1. How do I determine the number of non-empty directories? I was told to create a variable ARCHIVE, which points to the directory that contains the archive of the messages. But I'm so dumb and I don't even know how to do this. 2. In... (1 Reply)
Discussion started by: hygsg
1 Replies

10. Linux

pls help me

we hv a big enviroment networked. we use squid proxy. access allowed by src address previously. we have win2000 network with ads. my requirement is the proxy should allow domain users only for access. how can i map my windows userdatabase with squid is there any thing specific which has 2 b... (1 Reply)
Discussion started by: sriram.s
1 Replies
Login or Register to Ask a Question