Using flar


 
Thread Tools Search this Thread
Operating Systems Solaris Using flar
# 1  
Old 05-08-2018
Using flar

Hi

I have systems running UFS and ZFS file system type, and I need to create images of them ( in HP-UX ) we call it ignite, but in my case I dont have tape drives attached to the servers. I have read about flar archives, but the do I have to create those images in single user mode or using the current run level?
# 2  
Old 05-08-2018
# 3  
Old 05-08-2018
To answer your question flash archives do not need to be created in single user mode. They can be created in multi-user mode BUT you should do that when the system is as quiet as possible, not under load.
This User Gave Thanks to hicksd8 For This Post:
# 4  
Old 05-09-2018
ok, so after creating a flar archive would it be possible to provision other servers with this flar file
# 5  
Old 05-09-2018
Depends what you mean by "provision"?

Flash is usually used (1) for disaster recovery and/or (2) to clone a system.

Whether recovery or cloning the new system has the same node name, ip configuration, and other configs as the original. Be aware of that.

Why don't you want to do a fresh install?
# 6  
Old 05-09-2018
what I really want is to have an image of 4 servers and keep it in another server on the network, or use one server as a template to create other installations
# 7  
Old 05-09-2018
So if this other server has enough disk space to store the capacity of the four production servers, why don't you configure a NFS share (or 4 NFS shares) on it and backup each of them over the network? Does that do what you want?
These 2 Users Gave Thanks to hicksd8 For This Post:
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Solaris 10 Restore from flar image

Hi! I want to migrate Sun Fire v240 server (sun4u) with Solaris 10 update 6 to LDOM virtual host (sun4v). I was mount NFS directory from another server in /mnt and did this steps on v240 1) I add to the /var/sadm/system/admin/.platform PLATFORM_GROUP=sun4v # cat... (1 Reply)
Discussion started by: pbubentsov
1 Replies

2. Solaris

Solaris 8 Flar Creation/Restore

I'm new to utilizing Solaris... especially the old 8 version, but I'm trying to find out if there is a way to create a Flash Archive of a disk that can be restored on a smaller size disk or disk of varying size? (2 Replies)
Discussion started by: scifi_vixen
2 Replies

3. Solaris

"flar create" produces a tiny flar image of rpool

Hi, can someone help with the following? I got 1x146GB disk which is span by just one zfs rpool. When issue for example: as you can see in above output the flar is very small, just around 10KB rpool with all data sets has several GB so this can't be good image. This is on the Solaris 10... (3 Replies)
Discussion started by: TomSu
3 Replies

4. Solaris

flar on linux???

Hi admins, As we can create flash archieve on solaris with flarcreate command utility, so is there any utility like this on Linux to create flah archieves ?? (10 Replies)
Discussion started by: snchaudhari2
10 Replies

5. Solaris

FLAR Tape Backup/Restore

I have a T2000 server that is JumpStarted with Solaris 10 from the JumpStart server. Host name and IP address is changed after that. Then we backup the server using FLAR to tape: root.damas# date; flarcreate -c -t -n "Sol10_cairo_image" -a "engineering@starsolutions.com" -R / /dev/rmt/0n ;... (2 Replies)
Discussion started by: StarSol
2 Replies

6. Solaris

Jumpstart with flars: looking for /tmp/flar

I'm a little stumped here. If anyone has seen this, please point me in the right direction Little background first: I maintain a Solaris corporate build, currently based on Solaris 10u4 (08/07). This build is deployed using flars through jumpstart, wanboot, and jumpstart DVD. In the lab, I have... (1 Reply)
Discussion started by: System Shock
1 Replies

7. Solaris

Jumpstart / Flar problems Solaris 10 8/07

Hi, Im trying to make a jumpstart dvd using an flar archive. I have done this before on earlier releases of Solaris 10 (Sparc). Im now trying to do the same with the 8/07 release.. Problem : After the server is installed (during first boot ) the Select keyboard layout dialog appears. I... (5 Replies)
Discussion started by: s93366
5 Replies

8. Solaris

unable to create flar

Hello friend, Now i'm doing JDS3.1 in v440 servers.while checking the lustatus command getiing out like this lustatus Boot Environment Is Active Active Can Copy Name Complete Now On Reboot Delete Status -------------------------- --------... (0 Replies)
Discussion started by: rjay.com
0 Replies

9. Solaris

Flar Images

I once found a document on the web describing how to build partition flar images instead of having just the one large one. I have managed this but am having problems extracting the subsequent flar archives. I ahve built the system from a jumpstart server and now need to add the program images etc... (0 Replies)
Discussion started by: 58fairlane
0 Replies
Login or Register to Ask a Question

Featured Tech Videos