Login or Register to Ask a Question and Join Our Community


Solaris

Need help in patching with lu on SVM+ZFS FS with zones

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Need help in patching with lu on SVM+ZFS FS with zones
# 1  
Old 02-16-2018
Need help in patching with lu on SVM+ZFS FS with zones
Hello,
I need help in understanding, how lu can work on Solaris-10 on this server. I can detach mirror metadevices of LVM, but zpool looks confusing, which mirror I should break.
Code:
server-app01 # : |format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
          /pci@0/pci@0/pci@2/scsi@0/sd@0,0
       1. c0t1d0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
          /pci@0/pci@0/pci@2/scsi@0/sd@1,0
       2. c0t2d0 <SEAGATE-ST930003SSUN300G-0868-279.40GB>
          /pci@0/pci@0/pci@2/scsi@0/sd@2,0
       3. c0t3d0 <SEAGATE-ST930003SSUN300G-0868-279.40GB>
          /pci@0/pci@0/pci@2/scsi@0/sd@3,0
Specify disk (enter its number):

server-app01 # zpool status -v
  pool: z
 state: ONLINE
 scrub: none requested
config:

        NAME          STATE     READ WRITE CKSUM
        z             ONLINE       0     0     0
          mirror      ONLINE       0     0     0
            c0t0d0s7  ONLINE       0     0     0
            c0t1d0s7  ONLINE       0     0     0
          mirror      ONLINE       0     0     0
            c0t2d0    ONLINE       0     0     0
            c0t3d0    ONLINE       0     0     0

errors: No known data errors
server-app01 # metastat -p
d5 -m d8 d9 1
d8 1 1 c0t0d0s5
d9 1 1 c0t1d0s5
d1 -m d4 d6 1
d4 1 1 c0t0d0s1
d6 1 1 c0t1d0s1
d0 -m d2 d3 1
d2 1 1 c0t0d0s0
d3 1 1 c0t1d0s0

server-app01 # zfs list
NAME                           USED  AVAIL  REFER  MOUNTPOINT
z                              452G  68.0G     1K  legacy
z/export                       379M  68.0G   379M  /export
z/shared                      1.76G  3.24G  1.76G  /export/zones/shared
z/swap2                          1G  68.5G   479M  -
z/swap3                          2G  69.8G   152M  -
z/zones                        447G  68.0G    38K  /export/zones
z/zones/pgpi-factory1        6.65G  13.3G  6.37G  /export/zones/pgpi-factory1
z/zones/pgpi-factory1/var     288M  9.72G   288M  legacy
z/zones/pgpi-oradb1           153G  68.0G   153G  /export/zones/pgpi-oradb1
z/zones/pgpi-oradb1/var       242M  9.76G   242M  legacy
z/zones/pgpi-pin1            21.5G  8.51G  19.1G  /export/zones/pgpi-pin1
z/zones/pgpi-pin1/var        2.38G  7.62G  2.38G  legacy
z/zones/pgpi-webserv1        14.4G  5.60G  14.0G  /export/zones/pgpi-webserv1
z/zones/pgpi-webserv1/var     423M  5.60G   423M  legacy
z/zones/pgpj-factory1        7.50G  12.5G  7.50G  /export/zones/pgpj-factory1
z/zones/pgpj-factory1_local   190M  68.0G   190M  legacy
z/zones/pgpj-factory1_var     293M  9.71G   293M  legacy
z/zones/pgpj-oradb1           191G  39.0G   191G  /export/zones/pgpj-oradb1
z/zones/pgpj-oradb1_local     198M  68.0G   198M  legacy
z/zones/pgpj-oradb1_var      8.09G  1.91G  8.09G  legacy
z/zones/pgpj-pin1            22.7G  7.26G  22.7G  /export/zones/pgpj-pin1
z/zones/pgpj-pin1_local       307M  68.0G   307M  legacy
z/zones/pgpj-pin1_var        3.87G  6.13G  3.87G  legacy
z/zones/pgpj-webserv1        14.9G  5.11G  14.9G  /export/zones/pgpj-webserv1
z/zones/pgpj-webserv1_local   198M  68.0G   198M  legacy
z/zones/pgpj-webserv1_var    1.81G  8.19G  1.81G  legacy
server-app01 #
server-app01 # zpool iostat -v
                 capacity     operations    bandwidth
pool           used  avail   read  write   read  write
------------  -----  -----  -----  -----  -----  -----
z              449G  78.6G      5      4   233K  18.1K
  mirror       233G  17.5G      3      1   170K  6.89K
    c0t0d0s7      -      -      1      0   109K  6.93K
    c0t1d0s7      -      -      1      0   112K  6.93K
  mirror       217G  61.1G      2      2  63.6K  11.2K
    c0t2d0        -      -      0      1  51.1K  11.2K
    c0t3d0        -      -      0      1  51.0K  11.2K
------------  -----  -----  -----  -----  -----  -----

server-app01 #

My plan is to run lucreate and then install patch cluster on alternate disk, but how should I include ZFS file-system on this ?
Code:
lucreate -c "Solaris-10" -m /:/dev/dsk/c0t1d0s0:ufs -m -:/dev/dsk/c0t1d0s1:swap -m /var:/dev/dsk/c0t1d0s5:ufs -n "Solaris_10_Patch_BE" -l 

/var/log/lucreate.log

Last edited by solaris_1977; 02-16-2018 at 06:41 PM..
Login or Register to Ask a Question

Previous Thread | Next Thread

5 More Discussions You Might Find Interesting

1. Solaris

Solaris Global/Zones patching

Issue is : We have Solaris Global with 12 Zones and some have 15 Zones. All the OS version are10. Is it possible to apply patch at Zone level instead of patching at Global level? Please let me know. (10 Replies)
Discussion started by: baladelaware73
10 Replies

2. Solaris

Help req for Patching on Solaris 10 Zones

Hi Experts, Can advise on this: Global zone running on solaris 10, & the local zones on top running on solaris 9, but we need to patch the solaris 9 local zones & also the solaris 10 global zone. Which should be patched first to avoid any crash in case, first local zones... (1 Reply)
Discussion started by: fizan
1 Replies

3. Solaris

Patching on ZFS file-system

Hi, I have Solaris-10 (Update-7). This is having ZFS file-system and 10 sparse-root zones are there. I want to install Solaris-10 recommended patch cluster on it, but not sure, how to go ahead with procedure. I want to patch one side of the mirror and keep intact another side safe in case of... (6 Replies)
Discussion started by: solaris_1977
6 Replies

4. Solaris

How to share/mount ZFS in two non-global zones?

Hi All, first time here. :o I need a some assistance with ZFS. I have two ZFS pools: zoneA/nfs_export zoneB/nfs_export Each dataset is mounted in a particular zone (zoneA and zoneB respectively). I have created a new dataset "zoneA/nfs_tmp" which I want to mount or share... (8 Replies)
Discussion started by: gabriel4
8 Replies

5. Solaris

ZFS and SVM - volume management

pupp, thanks for the information. but is its integrated volume management better than SVM that we use (with ufs i believe)? (2 Replies)
Discussion started by: StarSol
2 Replies
Login or Register to Ask a Question