Unable to see controller C1 on Solaris 8


 
Thread Tools Search this Thread
Operating Systems Solaris Unable to see controller C1 on Solaris 8
# 15  
Old 05-10-2017
What error are you getting when you fsck s4?

I understand your concern about being unable to see the c1 controller, however, you seem to be able to see all the disks on c1.

So one side of the mirror of d3 (d13 which is c1t0d0s4) has a problem and needs maintenance. I guess other mirrors on the same drive are still working so the drive itself hasn't failed and d3 should still be mount-able which is the whole point of mirroring.

Have you tried to break and remake that mirror?
# 16  
Old 05-30-2017
Apologies for not replying.

Yes i did try breaking the mirror and remake previously but still getting the error.

Code:
bash-2.03# cat /var/adm/messages.0
May 21 09:19:12 xxxx  scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:12 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:13 xxxx scsi: [ID 243001 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0 (fcp0):
May 21 09:19:13 xxxx        FCP: WWN 0x500000e010279761 reset successfully
May 21 09:19:13 xxxx scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:13 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:14 xxxx scsi: [ID 243001 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:14 xxxx        SCSI transport failed: reason 'reset': retrying command
May 21 09:19:15 xxxx scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:15 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:16 xxxx md_stripe: [ID 641072 kern.warning] WARNING: md: d13: write error on /dev/dsk/c1t0d0s4
May 21 09:19:17 xxxx md_mirror: [ID 104909 kern.warning] WARNING: md: d13: /dev/dsk/c1t0d0s4 needs maintenance
May 27 01:00:07 xxxx explorer: [ID 702911 daemon.notice] Explorer started
May 27 01:04:33 xxxx explorer: [ID 702911 daemon.notice] Explorer finished

if i go with changing the disk then i cant see the controller to make this disk offline.

Running out of ideas for fixing this.

Thanks,
P
# 17  
Old 05-31-2017
It looks like the disk surface might be damaged within that filesystem on one leg of the mirror. You could try to repair the faulty side of the mirror that with format>analyse but you will need to be very careful about the block range you select for checking.

The vtoc will tell you cyls/blocks where that filesystem sits.

Repairing a Defective Sector (System Administration Guide: Devices and File Systems)

When sectors (blocks) are repaired they are often re-vectored within the drive using sectors reserved by the manufacturer for this purpose.

Last edited by hicksd8; 05-31-2017 at 02:36 PM..
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Unable to get Solaris 11 Zone onto the network

Hello, I followed these instructions to create a Solaris 11 zone: http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-092-s11-zones-intro-524494.html And I am unable to ping anything from the Local Zone except for the IP address of the global zone. My global zone has an IP... (6 Replies)
Discussion started by: unblockable
6 Replies

2. Solaris

Unable to reboot Solaris

Hi, we have a sun sparc solaris 10 machine and recently there was a power failure and one of the server domain was down. So today morning i have powered up the domain and it returned me to ok prompt then i have booted the machine with disk from devalias, the system was up as normal and no error... (0 Replies)
Discussion started by: phanidhar6039
0 Replies

3. Solaris

Unable to add printer in Solaris

HI I am unable to add printer in solaris (architecture is SUN and OS is Solaris 10) as I try to print the file it gives following error Failed to contact service for erp-cljCP2025: not-found Need help Regards (7 Replies)
Discussion started by: smazshah
7 Replies

4. Solaris

Solaris 11 server as Primary Domain Controller

Hi, All of our servers run Solaris (currently 10, but looking to upgrade to 11). In each of our offices we have a server configured as a Primary Domain Controller via Samba to provide naming services to our Windoze users. I would like to continue with that arrangement, but I would also like... (2 Replies)
Discussion started by: wgkorb
2 Replies

5. Solaris

unable to login Solaris 10

I have inherited a solaris 10 server. I went to log into it the other day over the console connection, and after sucessfully entering the password, I was booted back to the login prompt with no errors visible. If I enter an incorect password, the console displays 'incorrect password' and kicks... (8 Replies)
Discussion started by: Sol-nova
8 Replies

6. Solaris

unable to use thumbdrive in Solaris 10

hi friends, i had this problem in a Solaris 10 server when i inserted my thumbdrive, i can't find the device file containing usb. what should i do ? (2 Replies)
Discussion started by: Exposure
2 Replies

7. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Hi, I am unable to login into my terminal hosting Solaris 10 and get the below error message "Server refused to allocate pty ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory " Is there anyways i can get into my machine and what kind of changes are required to be... (7 Replies)
Discussion started by: sankasu
7 Replies

8. Infrastructure Monitoring

unable to shutdown solaris 10

hi folks, i have a snag, when i attempt shutdown of solaris 10 on a sunfire v240 it seems to pause for ages, and goes no further, im busy learning my way around the system so please be patient. /etc(R)-bash-3.00$ init 6 /etc(R)-bash-3.00$ svc.startd: The system is coming down. Please wait.... (7 Replies)
Discussion started by: alienkidmj12
7 Replies

9. Filesystems, Disks and Memory

HD Controller does not Work in Solaris

Hi, I'm attempting to build a raid Z NAS using solaris, but I only have 4 sata ports on my MB, so I bought a Rosewill RC-211 PCIe controller (adds 2 sata II ports). I'm new to solaris, but I understand that to add a new drive, you first run #devfsadm, which puts the files into /dev/dsk. I... (3 Replies)
Discussion started by: ciscocbee
3 Replies

10. Solaris

Unable to uninstall package in Solaris

I am getting the below mentioned error while trying to unistall a package from a 2.8 Solaris box. Please help.. pkgrm: ERROR: unable to determine current run-state Removal of <PDMgr> failed (internal error). No changes were made to the system. (1 Reply)
Discussion started by: chrisanto_2000
1 Replies
Login or Register to Ask a Question