Jumpstart process can�t find tape device

10 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

2. AIX

Backup to a remote tape device. Is it possible?

Hi all The situation is as follows: We need to take an mksysb image from an AIX 6.1 server. From some reason (irrelevant to this discussion) this server does not have access to a local CD-ROM or a tape drive. We do have another server with AIX 6.1 (but different technology level) which got access...

3. AIX

Tape device temporarily unavailable

Hi All, After (by accident) closing a session that ran a restore command I can not access the tape drive anymore. I get the following error: # tctl -f /dev/rmt0 rewind /dev/rmt0: Resource temporarily unavailable But I cannot find any processes associated with the tape device: # ps...

4. SCO

SCO UNIX DAT Tape Device

Looking for specifically naming convention for a tape device for SCO Unix What full system backup command should I use for SCO UNIX

5. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

6. UNIX for Dummies Questions & Answers

How to change tape device name.

I disconected external device which was configured as rmt0. When I connect it again and run cfgmgr device name has changed (internal drive which was rmt1 is now rmt0 and external drive was rmt0 and is rmt1) and I dont know how to back it out. The thing is that for all backups I use new modell...

7. Solaris

flarcreate to remote tape device

Hi, Someone knows hot to create a flash archive to a remote tape device? Here is my try: $flarcreate -n nereus -S -t lisdev:/dev/rmt/1n WARNING: hash generation disabled when using tape (-t) current filter settings Creating the archive... ERROR: Unable to work archive. Regards

8. UNIX for Advanced & Expert Users

tape device

Hi, 1- how can I find my tape device on my server ? 2-I have a backup of a data base distributed on several file system. How using tar -x can I extract from tape to each apropriate file system ? For exemple the data base was on /d1 ; /d2 ; and /d3. Now I cd to which /dn and use tar -xvf /dev/nm0...

9. UNIX for Dummies Questions & Answers

Is it possible to ufsdump to a file instead of a tape device?

Eh... what the title says. :)

10. Programming

tape device

Hi, I have problem detecting my tape drive. In SAM, once I click on the either Automated Backups or Interactive Backup and Recovery icon, the screen will prompt searching for device and ..... nothing appears in the list. In the end, I have the kill the SAM process and reboot the system and...

LEARN ABOUT REDHAT

amlabel

AMLABEL(8)						      System Manager's Manual							AMLABEL(8)

NAME

       amlabel - label an Amanda tape

SYNOPSIS

       amlabel [-f] config label [ slot slot ]

DESCRIPTION

       All Amanda tapes must be pre-labeled before they are used.  Amanda verifies the label in amdump and amflush before writing to make sure the
       proper tape is loaded.

       Amlabel writes an Amanda label on the tape in the device specified by the amanda.conf file in /etc/amanda/config.  Label may be any  string
       that does not contain whitespace and that matches the amanda.conf labelstr regular expression option.  It is up to the system administrator
       to define a naming convention.

       Amlabel appends the new tape to the tapelist file so it will be used by Amanda before it reuses any other tapes.  When you amlabel multiple
       tapes, they will be used in the order you amlabel them.

       Amlabel will not write the label if the tape contains an active Amanda tape or if the label specified is on an active tape.  The -f (force)
       flag bypasses these verifications.

       An optional slot may be specified after the tape label.	If a tape changer is in use, amlabel will label the tape  in  the  specified  slot
       instead of the currently loaded tape.

       See the amanda(8) man page for more details about Amanda.

EXAMPLE

       Write  an  Amanda  label  with  the  string  "DMP000"  on  the  tape loaded in the device named in the tapedev option in /etc/amanda/Daily-
       Set1/amanda.conf:

	      % amlabel DailySet1 DMP000

       Label the tape in slot 3 of the currently configured tape changer with the string "DMP003":

	      % amlabel DailySet1 DMP003 slot 3

MESSAGES

       label label doesn't match labelstr "str"
	      Label label on the command line does not match the labelstr regular expression str from amanda.conf.

       label label already on a tape
	      Label label is already listed as an active Amanda tape.

       no tpchanger specified in "path", so slot command invalid
	      The command line has the slot parameter but the amanda.conf file in path does not have a tape changer configured.

       reading label label, tape is in another amanda configuration
	      This tape appears to be a valid Amanda tape, but label does not match labelstr for this configuration so it is probably  part  of  a
	      different Amanda configuration.

       reading label label, tape is active
	      Tape label appears to already be part of this Amanda configuration and active, i.e. has valid data on it.

       no label found, are you sure tape is non-rewinding?
	      While  checking  that  the  label  was written correctly, amlabel got an error that might be caused by mis-configuring Amanda with a
	      rewinding tape device name instead of a non-rewinding device name for tape.

AUTHOR

       James da Silva <jds@cs.umd.edu>
       University of Maryland, College Park

SEE ALSO

       amanda(8) amdump(8) amflush(8)

																	AMLABEL(8)

Solaris